Question about Kenmore 3.2 cu. ft. Plus Top Load Washer
I have a Heavy Duty Kenmore 80 Series Washer. The model # is: 10 23812100 series CM 3765647 I would like to know that the tub size capacity is for that model,please. Thanks.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello, Your problem is going to be with your lid switch, this is located normally either in the control panel or about half way down on the right side under the lid. This is a safety feature to stop you opening the lid while the machine is in a high spin. Once you have located the switch trace the wires back to the wire harness in the control panel. Disconnect the lid switch from the wire harness and with an ohms meter check for condinuity on pin 1 & 3 (the 2 outside pins not the middle this is a ground) You should find you have no condinuity and should replace this switch. If you have any other questions or concerns please feel free to comment again. Good Luck!! Mike
Posted on Oct 14, 2009
For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...
FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.
PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.
If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.
Anything too complicated or beyond your scope should be handled by a professional.
If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question#$%$%
Posted on Oct 01, 2010
Hi from retired Englishman in SW France,
I would think that sort of information would be on the manufacturer's plate, probably at the back, and/or in the manual.
If you have no manual you will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
Posted on Jul 07, 2011
Tips for a great answer:
Nov 03, 2017 | Kenmore 24032\24036 Top Load Washer
Sep 04, 2011 | Kenmore 24032\24036 Top Load Washer
Feb 27, 2010 | Kenmore Washing Machines
Oct 26, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Sep 14, 2009 | Washing Machines
Sep 08, 2009 | Kenmore 24032\24036 Top Load Washer
May 26, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Dec 24, 2008 | Kenmore 24902 Top Load Washer
Nov 11, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: