I recently purchased a Dual XINBP-210 from a private party seller,original owner. I attempted to hook them up to my sony xplode 700w amp. I cannot get the subs to pick up any signal at all. I know the amp works( it pounds the crap out of my sony xplode 12") but even when i take the subs out of the box and hook one up directly to the amp, no signal, no static, no pop, nothing. All of the wiring is sound and the only flaw i've noticed is one sub's voice coil is seperated from the cone. I know it sounds like there are no options, but i hope you guys can give me some advice so i dont have to throw them away. thanx
I was driving and my subs quit working the amp is fine I took the speakers out of the box looked them over they are still tight no problems with the coils or terminal I hooked them up to my subwoofer wire on my home theater system and still subwoofers still don't work does anyone know what I can do before I throw them away
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
this bandpass enclosure is rated peak power at 1200 watts . what this means is that each subwoofer in the is peaked at 600watts to make 1200 watts . what your looking for is to power up the subs with rms continuous wattage . you need an amp that will put out 400 to 500 rms a channel to run this sub enclosure at 800 to 1000 watts rms to keep the speaker from blowing
this amp will give you
1 channel @ 4 ohm x1 350 watts
1 channel @ 2 ohm x1 900 wats
1 channel @ 1 ohm x1 1800 watts
you would have extra power for better subs with more power later but you get 900 watts which when connected right would mean 450 watts per sub be perfect for you .
i sell this for $320.99 in my store can shipp any where in usa
to contact me email@example.com
If your radio is still playing and the subs are giving you music, you most likely have the amp remote wire hooked to a constant power source on the radio. Generally, this is a solid blue wire on both the radio and the wiring harness. It allows the radio to turn the amp on and off when the radio is on or, subsequently, off.
it might be that your wires from your amp to your subs are too thin. since they were relatively new the first three months, they were probably undamaged, but after pushing them too much, they probably have broken wires, and can't get enough power to the subs when turned up, i suggest getting thicker wires before investing in a capacitor, it could save you money.