Question about Bosch Washing Machines

1 Answer

Bosch washing , problem with the timer

I have a pbroblem whit the timer ,it's 0.01 but the end of the program is after 1,20h for example and the program become too long. What to do ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Bosch Expert
  • 414 Answers

This is probably a heater fault, run a cold cycle (either wool cold or if you can set the temp, any cycle with the heating off)

Posted on May 04, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Bosch WFL 2872 washing machine

A similar thing happened to mine. I think it starts when there is a power cut or something similar mid cycle. The solution (which you would never guess!) is the following:

Select any programme - say 30 Cottons
Press and hold any function button - NOT Start Signal will sound at varying levels - release button when it gets to the level that you want, off in your case. De-select programme Good luck!

Posted on Aug 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch washing machine starts filling with water, then does nothing, timer counts down but no movment


have a technician check it out as it may be a board problem
normally the fill level switch ,when the set water level is reached activates 2 things
it stops the water in and at the same time moves the program on to start the wash cycle
so it is either that switch or the program board

Aug 13, 2015 | Bosch Washing Machines

1 Answer

Washes indefinitely - water does not heat.


perhaps a call to a service man locally will be your best choice . none I have ever worked on had heating as an option .

Jun 02, 2015 | Bosch Washing Machines

1 Answer

My 15 yr old Bosch d/w starts at 13 min & runs to 1, doesn't gets to CL. No water in or drain out.


IF IT ENDS UP WITH WATER SHOWING AT THE END OF EVERY WASH THEN THE DRAIN PUMP IS JAMMED OR FAILED THE DISHWASHER PROG WILL JUST KEEP LOOPING BACK TRYING TO DRAIN THE WATER.

Mar 04, 2017 | Bosch Dishwashers

1 Answer

My Bosch maxx6 takes very long on wash cycle


Possibly heater fault....if you set unit to, for example, a 40 degree wash, the machine will just keep washing unit it reaches selected temp, then drain and do the rinses. If the heater is open circuit then it will wash and wash and wash until the module times out because it is not getting there and continue to rinses, making the programs excessively long. (You may also find, if it has a display that it sit at 0.01 for a long time at the end of the cycle. Not sure of your model as you have not posted it, but if you go through the test below you can test the heater.
1. Put main dial to off
2. Press and hold start button whilst turning dial one click to left (easycare 30).
3. When display show 8.88 or two of the progress light come on, release the start button
4. Turn dial anticlockwise to 90 cotton (take the long way, NOT thru OFF or you'll have to start over)
5. Press start
The tub will fill a little and if the heater is ok, after a few minutes you will hear it 'kettling', the drum does not turn during this test.
If you have a meter that checks amp draw, if the heater is ok it should read around 9 amps.
Hope this helps

Mar 23, 2013 | Bosch Washing Machines

1 Answer

Classic Bosch Active & end light are alternately blinking rapidly when turned on. It will not start


Thisjust happened to me. The wash program wasnt set. Check thedial and make sure it is set to a wash program.

Feb 13, 2011 | Bosch 24 in. SGS43C12 Classixx...

1 Answer

Year old Bosch SHU33A0UC won't start. Lights on


Light's on mean you have power.

Initiate the self test program by doing the following -

To start test program, press and hold both POWER SCRUB PLUS and RINSE & HOLD program buttons, then turn unit on
by pressing ON/OFF button. When program buttons are released, lights above them will flash. To end test program, press
ON/OFF button.
To check program indicator lights (POWER SCRUB PLUS, REGULAR WASH and RINSE & HOLD), press and hold each
program button. When REGULAR WASH program button is pressed, CLEAN light also comes on.
To start testing, press both POWER SCRUB PLUS and RINSE & HOLD buttons a second time. When testing has ended
and a fault was detected, the following indicator lights will be lit:
POWER SCRUB PLUS = Heater fault
REGULAR WASH = Water filling fault (over or under filling)
RINSE & HOLD = NTC (temperature sensor) fault – note circulation motor stops shortly after it started
during an NTC fault
To check for heater, high limit or flow switch problems, start testing until heating starts. Using a meter with a current coil,
measure current going into dishwasher. If current is ~ 11 A, then heater, high limit and flow switch are OK. If current stays
at ~ 1.5-2 A, then heater, high limit or flow switch are faulty.
If water level switch (f1) has failed (opened), REGULAR WASH light will come on and unit will continually fill and drain
where testing won't be completed. If flow switch (e5) has failed (opened), water won't heat (to 150ºF) and water won’t stop
circulating. If NTC probe (f2/f4) has failed (opened), RINSE & HOLD light will come on immediately and testing will end
shortly after water has started circulating.
If more than one fault occurs, more than one light will be lit.

Let me know what you figure out. I can repair these boards most of the time.

Dec 18, 2009 | Bosch 24 in. SHE44C02UC / SHE44C06UC /...

1 Answer

Nec nw-891 washing machine will not complete the programmed cycle


Apparent malfunction in the timer circuits. Specific Component replacement not available.

Jun 30, 2009 | Washing Machines

1 Answer

Bosch dishwasher timer sticking


I have been told to replace the timer which I am looking to do the same to my machine!

Mar 24, 2009 | Bosch Dishwashers

1 Answer

Bosch dishwasher timer freezing


There is a recall on the control board of many of these models, butyour problem is likely not related. It sounds like a plugged drain system or a possible bad drain pump. That's why you are hearing the pump running constantly. I have written a guide to help. It is here. Thanks!

Mar 24, 2009 | Bosch Nexxt 300 Series WFMC2201UC

2 Answers

Bosch Dishwasher SHU53152


Common problem, bad timer. Press Scrub Wash and Del/Econo at the same time and the cycle will end.

Apr 14, 2008 | Bosch 24 in. SHU53 Built-in Dishwasher

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...