Question about D-Link (DSL-2640B) Wireless Router

1 Answer

What is pin no. there is nothing wrote down side of router

When i connect with net alway asking me pin no , what is pin no and who to register ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 32,281 Answers

If the default password on the DLink has been changed then -
To reset the DLink back to the default settings -
Press and hold the RESET button at the back of the router with the power ON until the LEDs flash at the time the release the RESET button. (firmware version was 3.00, and upgraded to 3.05)
Connect a LAN cable from the DLink to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-ink configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now change the default admin password.
You can now configure the wireless settings. (SSID, WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access).
Now configure the wireless card in your computer/laptop with the routers wireless settings.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Posted on May 03, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

What i have to do if its asking for a PIN Number when connecting a Belkin...


Hi Friends,

When you are connecting the Belkin router in Wireless,if it asks for PIN Number then please follow the below mentioned standard steps,

Step 1:Connect the belkin router to any one of your computer with an enternet cable.

Step 2:Open Internet Explorer and type 192.168.2.1 and click on Enter button in the keyboard.

Step 3:Now you will be able to see the belkin router page

Step 4:On your left side click on Wifi Protected Setup (WPS),now it will ask for password leave it blank and click on Submit.

Stpe 5:Now Change the WPS (Wifi Protected setup) to disable and click on Apply Changes.

Step 6:Now Try to connect the Wireless Networks in your wireless computer,it wont ask for PIN Number.

The above mentioned steps are the standard steps for the this problem.This is done because by default the belkin router's will be enabled with 2 security features so we have to disable any one of this feature.If you disable this then you wont have any Problem in the belkin router.


on Mar 16, 2010 | Computers & Internet

3 Answers

My network setup is asking for a pin number that is on my router. Obviously there is no pin number for this particular router and my network is asking for a 4 or 8 digit number. What do I do?


If its asking for a pin number I would check the sticker on the bottom of the router. it may have the router PIN you are looking for. If not trying typing in your internet browser address bar 192.168.1.1 and find the network settings and see if there is a pin set up, if so write it down or clear it to have no PIN

Feb 28, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

My laptop usually has no trouble connecting to a wireless router. I have just tried to connect to a friend's Belkin *which is not locked" and it asks me for a pin code - got the pin code of the bottom...


Hi,

To connect to the network in your laptop without entering a PIN code, please follow these steps.

1. Connect the computer to the router with an ethernet cable in one of the grey slot in the router.

2. Open up internet explorer and clear the address bar and type in http://192.168.2.1 and hit enter.

3. You will find a belkin router setup page, In the left hand side under the heading Wireless click on Wifi Protected Setup

4. When it asks you for a password leave it blank and click on submit.

5. There change Wifi Protected setup to disabled and click on apply changes.

6. Then in your laptop connect to the wireless network without any PIN number.


knowlogy_1.jpg
Thanks in Advance!

With Regards,
Prema.

Jan 10, 2011 | Belkin Computers & Internet

1 Answer

How do laptops connect to my wireless router?


Hi,
Wireless routers were configured with some security PIN in order to avoid unauthorized connections to your router. To connect to your router, just providing the PIN will do and no need of complex settings. Contact the service engineer who configured your router last time and tell him to configure your router with whatever preference you need. you can also set it in public mode so it wont ask anything and so anyone can connect into your router but this is not secure at all.
I hope this is helpful to you.
Thanks

Feb 07, 2010 | Arris SURFboard SBG900 Wireless Router...

1 Answer

Internet Light Stays Red on WAG54GS Wireless Router


If your router's internet light is red it means to say that there's no connection. You really have to call Tesco.

Aug 21, 2008 | Linksys (WRT54GC) Router

1 Answer

How to find the router ip address


Greetings...

You need to have a computer with a wired connection to the router to make this change... this is a Toshiba PCX5000?

open a browser and type in 192.168.100.1

it will ask for a password or make you setup a password, make sure you write password down... if it asks for a password and you do not know it, you will have to push the reset button and reset the router to factory specs and then add a password...

after accessing the router... in the left hand side bar click on wireless...

goto the wireless settings...

Wireless Net Name entry box - Also called the ESSID, the Wireless Net Name is the unique name
shared by all devices on the wireless network. All wireless devices on the network MUST use the
same Wireless Net Name to communicate with each other and the access point. The name can be
up to 32 characters long. By default, the PCX5000 uses “PCX5000” as the Wireless Net Name.

SAVE the settings and exit the router...

Manual, drivers and other information on the router are here

Have a great day...

Ed

May 28, 2008 | Toshiba Computers & Internet

1 Answer

Media access crontrol (MAC) address


Hi Stevetabor9,



Finding and Registering Your Xbox Console's MAC Address
  1. Turn on your Xbox console with no game disc in the disc tray.
  2. From the Xbox Dashboard, choose Settings, and then Network Settings.
  3. The 12-digit number at the bottom-right corner of theNetwork Settings screen is the MAC address of your Xbox console. Do not change your Xbox console MAC address; just write it down so that you can use it later.
  4. If you have a direct connection from your Xbox to your modem, you'll have to disconnect it and reconnect your PC to access the Internet.
  5. From your PC, open the following page:
    British Columbia: http://oca.bc.hsia.telus.net
    Alberta: http://oca.ab.hsia.telus.net.
  6. Log in using your Telus Velocity Internet Service account.
  7. Select Manual Registration and Administration of PC's and Devices.
  8. In an available slot, enter the MAC address of your Xbox console, then select Update.
  9. Follow the steps in Direct Connection with Telus to try to connect to Xbox Live again.
Registering Your Router MAC Address
  1. See your router documentation to find your router MAC address.
  2. Before disconnecting your PC from the Internet to set up a router connection, open the following page:
    British Columbia: http://oca.bc.hsia.telus.net
    Alberta: http://oca.ab.hsia.telus.net.
  3. Log in using your Telus Velocity Internet Service account.
  4. Select Manual Registration and Administration of PC's and Devices.
  5. In an available slot, enter the MAC address of your router, then select Update.
  6. Set up a router connection to Telus and try to connect to Xbox Live again.
take care

Mar 15, 2008 | 2wire 2700HG-B Router (2700HGB)

2 Answers

How to make Blitzz BWA711 Router secure?


The minimum security will be WEP, so the wireless receivers on your pc should match the type of encryption. To give you WEP you select security in the routers menu and choose yourself a mixture of 6 pairs of letters and numbers in any column from 1 to 6 if it gives you 6 options. Once the letters and numbers are chosen, note down the chosen leters and numbers, and enable wep and restart router. Now go to your pc's and and go to the software you use for the recievers and select WEP. You will probably have to tell the programme whether you are on a 'Shared network key' or an 'Open network', depending on your network type (try both until one works if not sure). It will then ask for the numbers and letters you chose and wrote down, enter these and click apply and restart system. The pc's should now connect to the router. Some wireless laptops are unable to recognise WPA type security or similair so WEP is better than nothing.

Jan 29, 2007 | Blitzz Technology BWA711 Router...

Not finding what you are looking for?
D-Link (DSL-2640B) Wireless Router Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...