Question about FUJIFILM Photography

1 Answer

Fuji Instax Mini 25 can't do anything!

Hello guys, I am writing about my Fujifilm Instax mini 25. I have had this camera for more than a year and the last time I used it was awhile ago. Just now I tried to take pictures of my dog and i noticed that it is broken. I tried clicking both the button to take picture and it did not do anything nor make any sound. it just click like a dead button. So I thought the film might be too old. So I got the back cover open and close it again, and I clicked it, hey! the film came out just like the first time we load a new film pack. So I thought it might be fixed, turns out it is still stuck. It didn't do anything even if I click the button a thousand times. Now I loaded a new pack of film thinking it might work this time, still a no. Though, the black plastic card inside the film thing rolled out normally like everytime I load a new pack. Nothing visibly odd on the little screen, no E symbol, only flash icon blinking. I thought its only to indicate flash will be used while taking this picture. But then again, not the problem. I never encountered this error until now. My camera used to work beautifully before. Please tell me what is going on and how can I fix the camera. Thank you!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 28 Answers

Hi,

most likely it's the motherboard spoil. bring it to nearest repair center to get it fix. mini 25 repair cost $55 to $65 SGD.

RT

Posted on Jan 15, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: nikon n75 problem loading film

I have (had) the same problem. I came onto this site to find out what I can do to fix it. It didn't help. I got pissed and almost threw the camera away. So I decided to get a little rough with the camera, (i normally wouldn't do this but i was going to throw it away).

I loaded the film like normal but before I closed the back I manually wound the film around the opposite spool. I guess I fooled the camera into thinking it had already wound the film.

When I closed the back of the camera everything worked fine.

I then snapped off the pics the camera said were left.

After this first role, I loaded the next role like normal. The camera worked like a charm!

By the way...the mirror dropped back down when I manually wound the film around the spool.

I hope this works...if it doesn't make any sense feel free to email me with any questions..

GOOD LUCK.
andy
amasseur at gmail dot com

Posted on Feb 09, 2008

trav1856
  • 57 Answers

SOURCE: Film Loading Error

This also happens to Yashicas often. (though instead of stirpping the film, it will rewind it back into the roll. Something's wrong with either the firmware or the drive system. It'll need to be taken to a camera repair shop, or you'll have to send it back to Canon for warranty service, if it's still within warranty.

Posted on Dec 04, 2008

  • 185 Answers

SOURCE: Fuji 35mm Camera (Model DL-400)

Dawn

remove the battery and check that it is good. replace battery and open back door, close the door and it should run the motor / transport. if so, load film up to the drive sprocket being sure film will catch on the sprocket.
or move the latch holding back cover, and open the door fully. check the pressure plate on the door, gently pull the plate up a little to increase pressure on the film. bring the holding lever out toward the latch and close the door to lock the lever back to position.

Posted on Dec 13, 2008

  • 14 Answers

SOURCE: Polaroid Problems

If your having problems with your camera, for about 20.00 you can buy the same camera on Ebay.

Posted on Jan 17, 2009

  • 302 Answers

SOURCE: Nikon F100 does not advance film to start of roll,

Jim, it really sounds like one of threethings. Either will require a repair shop.
1. the film sensor is not recognizing film in the film chamber, or film across the back, therefore not telling the advance motor to advance film...
2. The film advance motor itself needs replaced.
3. The rear door latch switch needs replaced.
Since everything else seems to do OK, I doubt the main computer board is bad.

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Fujifilm Instax Mini 8 is stuck on S and wont take pictures. What does that mean and what do I do?


Look it up in the manual. As you have described the item as disposable, why not do just that and buy one which works ?

Apr 28, 2016 | Fujifilm Instax Mini 8 Camera - Pink

1 Answer

Is the flash off by default on start up? My light is not working.


Lomo'Instant Camera - Lomography

microsites.lomography.com/lomo-instant-camera/about/

LomographyThe Lomo'Instant has an auto flash shooting mode so you can easily shoot fantastic ...The default aperture value is f/16 and the exposure compensation dial can be ... Theflash is switched off and you can switch between N for normal daytime ... Close-UpLens Attachment (Included in the Camera plus Lens Packages): With ...

Fuji Instax 210 Instant Film Camera Review - Dan Finnen

danfinnen.com/review/fuji-instax-210-instant-film-camera-review/
Oct 2, 2013 - Here is a line of instant cameras that are still manufactured new and use film ... using the camera, mostly because your hand is already covering it up. ... Other controls include a lighten/normal/darken switch and a flash on/off button. ... Heck, if the camera didn't default into macro mode that would make the ...

Fujifilm Instax Mini 90 - Instant 'Polaroid' camera - PhotoMadd

photomadd.com/fujifilm-instax-mini-90-instant-polaroid-camera/

Jan 11, 2016 | Photography

1 Answer

How to fix three red flashing on instax mini 7s? I had change the battery and it work but only for a short time


  1. Amazon.com: Questions and Answers: Fujifilm Instax MINI 7s White ...

    www.amazon.com/Fujifilm-MINI-7s.../-/-/1?_... Amazon.com, Inc.Questions and Answers on Fujifilm Instax MINI 7s White Instant Film Camera. ... Sort: Most Helpful first ' Newest first. Showing 1-10 of 31 questions. 3. votes ... Now when i take photos the photo turn out black What can i do to fix Jun 1, 2015.

Jul 21, 2015 | FUJIFILM instax mini 7 Digital Camera

2 Answers

How to known if there is nothing wrong just by looking at the fuji instax mini25


You do it the same way you make sure there's nothing wrong with a used car just by looking at it.
The only way to show that a camera works correctly is to take some pictures with it. Even then that doesn't show that there's nothing wrong with it, just that some things do work correctly.

Apr 24, 2012 | FUJIFILM instax mini 7 Digital Camera

2 Answers

Fuji instax mini 25 film can go through x ray?


X-rays can fog many types of film. If you are flying you can declare that you have film, and have them manually inspect it rather than sending it through the x-ray machine.

Mar 02, 2011 | FUJIFILM Instax 200 Instant Film Camera +...

3 Answers

My fuji instax mini 7s has an error message on the screen. It blinks "E" and does not allow me to take any pictures. The instructions and manuals that came with package are all in japanese and i...


Firstly, remove the remaining films in your camera (while the camera is switched off) Secondly, switch on the camera. Press the power button and the shutter button simultaneously at one go. (to reset) Thirdly, reload a new set of polaroid films. Hope it helps!

Nov 05, 2010 | Fuji instax mini 7S Film Camera

Not finding what you are looking for?
Photography Logo

Related Topics:

1,029 people viewed this question

Ask a Question

Usually answered in minutes!

Top FUJIFILM Photography Experts

kakima

Level 3 Expert

102366 Answers

 steve
steve

Level 3 Expert

6438 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

Are you a FUJIFILM Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...