Question about Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

1 Answer

Fisher and Paykel dishwasher double drawer problem

I have the same problem Melkins37 has, The top drawer of my dishwasher will not run. The outside control panel flashes with different times and will not reset. There a three light lit up on the inside control panel and they also will not reset. Did anyone resolve this issue? I already took apart the top drawer and clean it all. Let me know. thanks FM

Posted by on

  • 3 more comments 
  • fama Aug 09, 2007

    It is factory finish, stainless steel. Is that what you mean?

  • fama Aug 10, 2007

    Thank you. I appreciate your help, I will try that and let you know if it worked, this thing is driving me crazy.

  • fama Aug 10, 2007

    Hi Carmen,

    My double drawer dish washer is built into my cabinets, how do I go about unplugging them? Do I have to pull the drawer out, if so, how? Or is it all the wiring under the drawer that needs to be messed with? thanks!

    FM

  • fama Aug 11, 2007

    problem solved, I reset it by turning the power off for 10 seconds. Thanks a bunch!!

    FM

  • Anonymous Jan 07, 2009

    I have the Fisher and Paykel double drawer s/s dw and the bottom drawer will not go on at all--Its plugged in as the top unit runs--can anyone help me? hate to call the repair man the last time he was here I got a $300.00 bill

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Hi there FM, Your Dishdrawer is it intergated or does it have a factory finish on it? This will help me ask the next question? Kind Regards Carmen

Posted on Aug 09, 2007

  • Carmen Delamare Aug 09, 2007

    Hi there FM,

    Ok have you tried switching it off for 10 seconds at the wall and switching it back on, as it sounds like it is in display mode and needs to be reset.

    Kind regards Carmen

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher paykel cross draining


As the drawers share a common outlet to the kitchen sink drain, it is the drain water from bottom drawer going to top drawer. Can happen if the drain hoses are not following the correct specifications for installation. An air gap kit is available to solve the problems.

Refer
http://www.genuineapplianceparts.net/product/WT50/WT50-Dual-Air-Gap-Kit/?preadd=action&key=WT50

Mar 22, 2014 | Fisher and Paykel Dishwashers

1 Answer

Top drawer can not be open


If this is a double drawer dishwasher and bottom drawing is functional but top drawer won't open means the controller on top drawer is faulty or power circuit is locked. If turning the mains power off and back on makes no difference then controller could be the problem. One way to test is to take the controller from bottom drawer and replace that in the top drawer. This requires a lot of patience and experience with electronic stuff. If you are not brave enough to test then call the technician. The controller is about $200 to buy. Make sure the mains power socket is taken out before working on the dishwasher internals.

FISHER PAYKEL DISHWASHER DD603 Parts

Feb 10, 2014 | Fisher and Paykel Dishwashers

1 Answer

Fisher Paykel double drawer built in top drawer stops mid cycle.


It would help to know which LEDS are on when it stops. Are you able to open the lid etc. Does this happen with the short rinse cycle as well?

Oct 17, 2010 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

I have a Fisher Paykel dishwasher with water in top drawer


You need a Air gap kit designed by Fisher and Paykel to address this problem. It is pricey but it is worthy. I used this and very happy with it since no back flow problem from one while other running. Here is a link to order it.http://www.fisherpaykelparts.net/product/WT50/WT50-Dual-Air-Gap-Kit/

Dec 12, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

FP DD603 draining problem


This device will solve the issue of cross-draining between drawers on Fisher paykel double dish drawers.
http://fisherpaykelparts.net/index.php?categoryid=1&productid=7

Aug 10, 2008 | Fisher DD603B / DD603W / DD603H Dishwasher

2 Answers

Fisher and paykel twin draw


I'm not really sure. With the double drawer configuration, I know the top drawer is larger than the bottom drawer. If I had to take a guess, I would say the single drawer might fit in the top of the double drawer.

Jun 26, 2008 | Fisher and Paykel 24 in. DD603H W Built-in...

2 Answers

Flashing screen


Hi there, Sounds like your product is in display mode so you will need to switch the product off for 10 seconds at the wall and switching it back on to reset it. Kind regards Carmen

Jun 21, 2007 | Fisher and Paykel 23 in. DD-603SS Built-in...

Not finding what you are looking for?
Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher Logo

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brian Coughlan

Level 2 Expert

279 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...