Televison & Video Logo

Related Topics:

Posted on Mar 15, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a Philips Projection TV Model 55PP241761 from label but 55PP241/76 seems to be the number recognized. The chassis # is PTV 918. After a few minutes the audio will shut down. Also the buttons on the front of the tv causes the channel to change. Especially the Volume down button. The switches seem to be dirty. When checking them with a meter they do not go to zero ohms when closed but instead have some varied resistance. The owner of the TV had a technician check the set and was told it needed a small board changed but he(owner) does not know which board. I believe it to be the SSB board. I have a part number of 313912725881 for the SSB? Also would like to know if an original remote is available for this TV. The original is gone and the univeral remote will not operate all of the functions that are needed. Thanks.

  • Anonymous Jun 28, 2013

    hi i would like to know if you could solve the problem of your projector?, i have one with the same problem of audio and buttons. What did you do to solve that?

  • Anonymous Jun 28, 2013

    hi i would like to know if you could solve the problem of your projector?, i have one with the same problem of audio and buttons. What did you do to solve that?

×

2 Answers

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Master 1,550 Answers
  • Posted on Mar 15, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Sep 06, 2008
Answers
1550
Questions
2
Helped
450941
Points
4209

You can get the SSB board from the link below

SSB board part


Original remote is not available online contact philips to get one for your product . Else you need to continue with the universal remote .

Contact philips

Hope this helps .

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 8,619 Answers
  • Posted on Mar 15, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Dec 27, 2008
Answers
8619
Questions
4
Helped
2149590
Points
26471

Hi

Try to replace the sound board and please provide the no that appears on the back of the remote to find the replacement.You can also buy the remote from remotes-central.com or replacement remotes.com.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Philips 43p8341/37, ptv 914 chassis, led code blinks

Let's check and see if we can find the correct board with the problem. A good place to start is to disconnect the jumper jack 1516 [TV unplugged first]. Now plug in the TV, and power the TV on. If the tubes light up and shut down...then the small signal module is at fault. {this contains convergence ICs} Or it could possibly be the ssb [small signal board] is bad. Leave the set unplugged for a few days and plug in and power up this TV..It may work for a few seconds and go down again. These are two good places to start before you pull the boards out...and they are not easy!
0helpful
1answer

Won't recognize DVI

You need to set your input of the televison to either 4 or 5
1helpful
2answers

No picture/ power button flashes twice constantly. 2 flash code?

Sorry, but there is no simple answer to your problem.
Bottom line, it needs to be repaired by a qualified technician.
The blinking is a code for what circuit area of the set called for the shutdown.
No matter what it is, there is nothing more you can do.

www.mcveyelectronics.com
0helpful
2answers

NEED URGERNT HELP!!!

Hey mate,
Let me know chassis number of TV as model number is not so helpful to me in Philips service manuals.

I do have few service manuals of Philips according to chassis numbers.

I can refer you a website where you can buy service manual with model number. Philips model and chassis game is still Puzzle for me.
0helpful
1answer

I HAVE A PHILLIPS MODEL 50P8341 REAR PROJECTION TV THAT COMES ON ,THE RED POWER LIGHT BLINKS FOR A SECOND AND THEN CUTS ITSELF OFF

Try the power supply. Look on the one in your TV for the part number ; mine is PH3501705441. I ordered one from partstore.com and it was less than $60 shipped. Hope this helps, mine works fine now........and I have a 50P8342 chassis PTV 916
1helpful
1answer

Philips 60p8342 chassy ptv 916

check all your solder connection and test the resistors on the conversion IC's , also check oscilating circuts
0helpful
1answer

Need Parts Number For Flyback In Philips W/S TV Model # 51PP9303H/17

If you are not sure how to find/repair/replace the HVG yourself goto www.TvRepairKits.com to get their how to guide that includes the part numbers, suppliers, instructions, etc.
0helpful
1answer

Philips 9p5034c101 rear projection.chassis#ptv 835

Just replace the two STK392-110 Convergence ICs and that will correct the convergence. The small pic if its centerd in the center of the screen is usually caused by the opto-couplers being bad
0helpful
2answers

Buttons won't work

You will probably need the service manual for both chassis to straighten that out. I am posting a link where you can purchase one manual that covers the entire series for magnavox PTV 836-PTV 835 it has 2,440 pages. It cost 19.99 and they will email it to you and provide you with free unlimited support that goes with the manual purchase. here is the link if interested in getting the service manual.
http://servicemanuals.vstore.ca/
Not finding what you are looking for?

270 views

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...