Reset dishwasher my dishwasher is stuck on delayed timing..I have held down the start button several times and its still on delyed timing

Maybe the sealing thing is stuck in the down position? It rests inside the rim of the drawer when it's operating...

Maybe the buttons are locked (this is a feature). Mine has a button with a lock symbol. Hold it down, and then maybe your buttons will work again?

The 06h indicates the unit is in delayed wash mode. Weird.

Hi,

Try to do a hard reset by unpluging all the cords for 1hour and then plug it back.

Goodluck,
Please don't forget to rate the solution

Some Bosch dishwashers have a time delay option. The H01 indicates a one hour delay has been selected. Press the Delay key several times until you see H00 in the display. Then try to start the dishwasher cycle you need. Bosch error codes tend to start with E.

Please add a comment with the model number of the dishwasher if you need additional help. (Without the model number, I can't be sure which key sets the time delay. On some models, the key is near the On/Off button. On others, it's closest to the Start button.) I hope this helps.

Cindy Wells

Hi and welcome to FixYa. I am Kelly. The 4H is indicating your dishwasher is in the delayed wash start mode. Here is some information from Sears about what to do:

• The number letter combination indicates that the dishwasher is in a "Delay Start" mode, as well as how many hours were set for the delay start.
• The dishwasher will not start the wash until it reaches the delayed hour that it was set for. Example: 1H = 1 hour delay start, 2H = 2 hour delay start, etc.
  • To start the dishwasher immediately and not wait for the Delay Start time, cancel the "Delay Start" option, by pressing the Cancel button. Then program the cycle and options and press Start.
  • To start the dishwasher after the Delay time, select the cycle and options desired. Select the "Delay Start" option and on some dishwashers it requires, pressing the Start button.
  • Some dishwashers will display a countdown of the delay time on the display.

Note: Refer to the Owner's Manual or Use & Care Guide for specific instructions on using the "Delay Start" feature.

If you need more assistance we will need your exact model number in any of your future responses.
Thanks for choosing FixYa,
Kelly

check out my thread on a similar issue. If your power button doesn't light and delay button does not light? Is the LCD screen display anything? check out my post several really good check lists.

1. To cancel the delay.press the delay pad again when the delay is counting down. The indicator light will go out and the cycle will start or resume immediately.
2. To cancel the delay and the cycle, press Start/cancel once to drain and turn-off the dishwasher.
3. Press Start/cancel twice to turn-off the dishwasher without draining.
   

Thanks. I figured it out from the online manual. Hold buttons #2 and #3 (second and third button down on far left side) for 2 seconds should reset it. It took some 15 minutes however before the dishwasher reset!

Peter Smith

I think that the delayed use is engaged.  Wait an hour, and it will probably start up on its own.

holding the button for four seconds will not do it, you have to hold it until the light stops blinking and
will go back to normal, normall takes more than four seconds to unlock the unit, this is something
the sears repair techs know becouse the are trained on all this things but, they will not share this things, becouse thats how they make money

Would your start button be stuck? check to see if there is something keeping it pressed in? if not your control star button could be shorted...let me know