Question about Dynex DX-L26-10A 26 in. HD-Ready LCD TV

1 Answer

Light blink 6 times

Light blink 6 times red then I push power button it go green but no picture or sou

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dynex Master
  • 73,710 Answers

6 times blinks denote a fault to its main board. If you wish to get more details, check this site linked below. Pull up older posts there. Check the site with patience, as it has over 2380 posts now. All are related to electronic equipment repair help. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name to your device into its search box at the top right of display window.http://electronicshelponline.blogspot.com/

Posted on May 01, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: power button is green - no blinks / no picture / no sound

Unplug it from the wall, wait 2 minutes and plug it back in. if problem still exists, its probably the main pcb.

Posted on Aug 21, 2008

budmrtn
  • 11361 Answers

SOURCE: My dynex tv will not come on seems to be stuck in standby mode.

It sounds like the main power supply is trying to startup but failed because there is short circuits or the main power supply is bad. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.

Posted on Nov 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a sony rear projection TV model number kfws60s1 that will not turn on I press the on button and green light will flash 5 times then goes red again please help shed light into the problem pleaz


Understanding Sony Television Blinking Codes ' Techlore

www.techlore.com/article/understanding-sony-television-blinking-codes
Now the red light blinks 5 time while watching it. Is there any way of ..... 2006 that willnot power on and the green LED is blinking 6 times. We had a service ...

Sony KDF E55A20 - 5 Flashing Read Lights - TV Forums

www.tv-forums.com/.../TV.../TV.../Sony_KDF_E55A20_-_5_Flashing_...

Mar 17, 2012 - 14 posts - ‎4 authors
We have had a Sony KDF E55A20 since January 2006 and it has been trouble free. ...The TV will switch on fine green power lights. Then after about 20 ... If I turn off and turn on the power light will flash red 5 times. Leave it off ...

Sony TV - How to troubleshoot a red or blinking light ...

? 3:36
https://www.youtube.com/watch?v=BLkyFXv2-i4
Apr 6, 2012 - Uploaded by SonyListens
Sony TV - How to troubleshoot a red or blinking light ... and power lights, these easy steps will help you determine what the... 5:17. Easiest TV repair - How to Fix Power [TV turns off, freezes, ... Get video URL at current time.

Dec 02, 2015 | Sony Televison & Video

1 Answer

MY SONY TV MODEL # KF42-WE610 IS SOUND IS COMING ON BUT NO PICTURE


If you turn it on and the, Power/Standby green light blinks slow 6 times; then it becomes a red fast blink 6 times, pause, then continues to blink red fast 6 times, again and again. this means when it's blinking 6 times is indication of electrical circuitry malfunction. The Television will need service.

Sep 30, 2014 | Sony Televison & Video

1 Answer

Sony bravia kdl55hx729 3d led tv turns on 3 seconds shows picture than four red flashes


Hello,
the error light sequence that you are seeing is indicating a "backlight error". Most likely you have a bad inverter board -the board that powers up the back-lights behind the display panel. They might be available via ebay if you are a DIYer, or you need to call for sony service.
Good Luck!
Rich Lilja

Dec 07, 2013 | Sony Bravia KDL-55HX729 LED Internet TV...

2 Answers

Series of 3 blinking lights. manual says lamp door isnt fastened properly. it is. i tried unplugging tv, have opened and closed lamp door 3xl. still blinking.


After I unplug and then plug tv to reset I get a solid standby light,then when I push the power button I get a green light that blinks 6 times then it blinks red 6 times and then red 6 times continuosly with a slight delay between the 6 blinks of red.

Oct 11, 2009 | Sony Grand WEGA KDF-60XBR950 60" Rear...

2 Answers

Sony kde37xs955 green light blinks 9 and red light blinks 6


hi..
It's in standby mode.
Do a reset and see what happens
While holding down the reset button on the remote
Press the power button on the tv
(The tv will turn itself off the back on)
Now release the reset button
It sounds like the lamp needs replaced....

thank u!!
rate me!!!

Apr 10, 2009 | Sony WEGA KDE-42XBR950 42 in. HDTV Plasma...

1 Answer

Error number 1700 canon s9000 printer


knowing printer manufacturers I doubt they even have a sensor to detect that its full at all, they probably based on something crumby like print count. here are some instructions to reset the waste ink tank, the instructions vary so try them until one does the job :
Waste Ink Tank Reset

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice, then release all buttons
5: When the indicator lights steady, press RESUME three or four times. The indicator should be orange.
6: Press Power to set data



1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.



1. power off Printer
2. Push and hold resume button and push power button
3. Hold Power button and release Resume button
4. Push Resume button twice ( 2x ), and now release resume button and power button
5. Green light will blinking and stop.
6. When green light on, push resume button 4 x
7. Push Power button and printer will off, if that isn't off, push power butto again until print off position.

Aug 20, 2008 | Office Equipment & Supplies

2 Answers

Sony LCD television will not power on.


I get 5 blinking red lights for about a minute or so before it powers back down. The Sony TV has a specific light that i presume is supposed to light up when the bulb is out. I'm unsure if this is what it is.
no picture, no sound. tries to boot with green light blinking a few times. then goes to red blinking light, six in all, then waits a few moments, then another 6 blinking red light.
Bulb was already replaced several months ago but we do have the TV on for long periods of time.

Jan 15, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

4 Answers

Lost all Power to TV


My TV did the same thing today. My red light blinks 6 times. Any help would be much appreciated!

Jan 05, 2008 | Sony KDF-E55A20 55 in. LCD Television

2 Answers

Red then green blinking lights.


push power on at button (no need to hold button)and press proceed button for 2 secounds at the same time you turn on power and it should reset.

Dec 24, 2007 | NEC PlasmaSync 50MP1 50 in. Television

Not finding what you are looking for?
Dynex DX-L26-10A 26 in. HD-Ready LCD TV Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73710 Answers

Cindy Wells

Level 3 Expert

5062 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...