Question about HP OfficeJet 4255 All-In-One InkJet Printer

Open Question

Place align page face down feeder press ok - HP OfficeJet 4255 All-In-One InkJet Printer

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

sk8er1707
  • 58 Answers

SOURCE: alignment

you have to be really careful with thermal printers they tend to break very easily...

  1. make sure you have the printer in the right outlet
  2. the sheet is aligned properly
  3. you have'nt shredded an electric wire tape
  4. and last make sure you haven't over heated a sensor
Good luck

if u need any more help feel free to pm me

Posted on May 25, 2009

bdlimon
  • 19 Answers

SOURCE: Can't use printer. Stuck in Align heads mode

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
237c944.jpg

http://www.hp.com/printer/prob676ijt65/solution

abdsf22

Posted on Sep 06, 2009

thinksourav
  • 30 Answers

SOURCE: On initial setup of my HP5610 the alignment page

take out the cartrdiges from the printer and then clean the contact points on the back of the cartridges. then unplug the power cable from the back of the printer and then press and hold down the color copy and cancel button at the same time. and then plug back the power cable back into the printer. try to power on the printer and insert the cartridges one by one into the printer.

Posted on Nov 04, 2009

  • 80 Answers

SOURCE: hello, this is Devendra here,

Hello there,

Follow these steps to change the print settings on your computer to print on legal size paper.

  1. Press the Cancel button on the product to stop the current print job, if necessary.
  2. In the software program that you are using to print, click File , and then click Print .
  3. Make sure that the appropriate product is selected.
  4. Depending on the program, click Properties , Options , Printer Setup , or Printer . The Print Properties dialog box opens.
  5. Click the Features or Print/Quality tab.
  6. In the Paper Type or Type Is drop-down list, click the appropriate paper type.
  7. In the Size or Size Is drop-down list, click A5 or Legal .
  8. Click OK to save the settings.
  9. In the Print dialog box, click Print or OK to start printing.


hope this helps. Please do not forget to click on feedback and leave a testimony.

Thanks!

Posted on Mar 12, 2011

christian_HP
  • 89 Answers

SOURCE: Printed align page but message on printer screen

It could be stuck on error message that may lead to possible hardware issue for HP Officejet 4110 All-in-One Printer

But after it printer alignment page put the page facing down to the scanner glass if your printer has one
If not then its an automatic alignment sensor issue inside the printer maybe the reason

call hp support 18004746836 they may give you options to upgrade you unit to a newer version with a low cost
this is only exclusive for HP customers you can take advantage of it

Solving Print Cartridge Alignment Problems

http://h10025.www1.hp.com/ewfrf/wc/document?docname=buu00657&cc=us&lc=en&dlc=en&product=90792&tmp_track_link=ot_search

Hope I help you a bit.

You can also send me questions on my

personal email - christian4122@yahoo


Your's Truly,

Christian from HP

Posted on Mar 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant align printer cartridges


Open the top lid, and then place the alignment page face-down on the scanner glass in the lower-left corner.
Close the top lid, and then press the Scan button on the control panel. The product aligns the cartridges.

Mar 04, 2013 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Hello, this is Devendra here, we request you eto kindly assist us with our problem which we are facing with our printer hp j3608. Actually we have replaced the cartridge of 702 model. Ater placing the...


Hello there,

Follow these steps to change the print settings on your computer to print on legal size paper.
  1. Press the Cancel button on the product to stop the current print job, if necessary.
  2. In the software program that you are using to print, click File , and then click Print .
  3. Make sure that the appropriate product is selected.
  4. Depending on the program, click Properties , Options , Printer Setup , or Printer . The Print Properties dialog box opens.
  5. Click the Features or Print/Quality tab.
  6. In the Paper Type or Type Is drop-down list, click the appropriate paper type.
  7. In the Size or Size Is drop-down list, click A5 or Legal .
  8. Click OK to save the settings.
  9. In the Print dialog box, click Print or OK to start printing.


hope this helps. Please do not forget to click on feedback and leave a testimony.

Thanks!

Mar 12, 2011 | HP J3680 Officejet All In One Printer

2 Answers

How do you stop a test page from printing every time the printer is turned on?


Welcome to FixYa!

Here's how to stop the unwanted print out of test pages.

1. Let the printer print the test page.
2. Place the printed test page in the scanner face down and wait for 10 seconds.
3. Press the scan button of the printer to scan the printed test page.
Make sure that the printer scanned the document properly.

That's it. Every time you install a new cartridge, the printer aligns the print cartridge as well as testing/aligning the scanner.

Note: Try to look at the top of the test page, it should have instructions to place it in the scanner.

I hope that this will help.
Thank you for using FixYa.
Jas247

Mar 07, 2011 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

How do I scane on my mx310


You will need to plug the printer andcomputer together with a USB cable in order to use the printer's scanningcapabilities. The scanning unit on theMX310 features an automatic document feeder on top of the printer, which willscan multiple pages itself. You can also choose to load documents on thescanning glass, which is covered by the scanner's lid. This is how to do it. 1. Turn on the printer by pressingthe "Power" button until it illuminates and turn on the attachedcomputer. Wait for the printer to finish its initialization process beforecontinuing. 2. Place the document face up inthe automatic document feeder if the document's papers are uniform in andfit in the feed tray. Adjust the paper-width guide to the of thedocument's papers. 3. Place the first page of thedocument face down on the scanning glass after you have lifted the scanningunit's cover, if you choose to not use the automatic document feeder. Close thecover again slowly so the document does not shift on the glass. 4. Press the "Scan"button on the printer's control panel, then press either "Black" or"Color," depending on the type of scan you would like to perform. 5. Retrieve the scanned documentfrom the automatic document feeder's output tray once the scan job is over.Otherwise, click on the "Yes" button on the computer's screen,indicating you would like to scan another page. 6. Lift the scanning unit's cover,remove the document from the scanning glass and place the next page of thedocument face down on the glass. Close the scanner's cover and click on the"OK" button on the screen to scan the next page. Repeat this processuntil all of the document's pages have been scanned.

Jan 13, 2011 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Why does my HP 1500 prints a test page every time I begin touse it???


HI
As soon as the printer prints the test page or alignment page place it on the scanner glass (Place the printed side down) before that Examine the scanner glass and white scan backing. Clean the scanner glass and scan backing if they are not clean. To clean the scanner glass and scan backing, use a soft cloth towel slightly dampened with clean water.
After That press scan on the printer button panel it will resolve your issue.
Try to double check it by turning it off and turning the printer back on after 2 minute's. If still the problem exists call HP Total Care 800 - 474 - 6836 if you are from US/Canada.
) Lift the lid of the product.
2) Place the top of alignment page face down in the right front corner of the glass.
3) Place the alignment page face down
4) Close the lid.
5) Press the Start Scan button.
6) The Power button light will blink during the alignment process.
7) After the Power button light stops blinking, alignment is complete.

Aug 04, 2010 | HP Office Equipment & Supplies

1 Answer

Align to align your new print cartridge ? problem ?? hp officejet 4212 All-İn-One .


after the printer has printed the alignment shoot, Place is face up on the document feeder and press OK button,

If this does not work, Disconnect power cord from printer ( while printer has power ) and Press and hold # and 6 button and connect the cord back.

Follow the process to align the printer

2nd Solution Is :
Press Menu ( setup ) button on printer
Scroll to Tools ( press ok )
Choose Align Printer/Cartridge ( press ok)

Jun 18, 2010 | HP OfficeJet 4255 All-In-One InkJet...

2 Answers

How do i install ink cartridge for HP 4355?


Hi there,
To install the ink cartridge
1) Press the On button. After you press the ON button, wait for the print cartridge prompt before continuing.

2) Open the print cartridge door. Lift the print cartridge door. The print cartridge moves to the right side.

3) Remove tape from both cartridges. Pull the tab to remove the tape from both print cartridges.
Important : Do not touch copper-colored contacts or retape the cartridges.

4) Insert the tri-color print cartridge.
Caution : The device must be On before you can insert the print cartridges.
a) Slide the tri-color print cartridges into the left slot.
b) Push the top part of the cartridges firmly up and into the slot until it snaps into place.

5) Insert the black print cartridge.
a) Slide the black print cartridge into the right slot.
b) Push the top part of the cartridge firmly up and into the slot until it snaps into place.
c) Make sure both cartridges are secure, Close the print cartridge door.

6) Align the print cartridges.
a) Press OK to print the alignment page, (Make sure you have loaded plain white paper in the bottom tray,)
b) Remove the alignment page from the output tray.
c) Place the alignment page face down into the document feeder.
d) Press OK to scan the alignment page.
After the page has scanned, alignment is complete.

Hope this helps. Please rate my response.
Thanks
Have a good day.

Dec 01, 2009 | HP Office Equipment & Supplies

2 Answers

Faxing


if using the feeder probably face up as it will likely pull the document in and invert it to lay face down on the scanning glass.

if you lift up the feeder (like lifting the top of a copy machine), then it would be face down on the glass.

there should be an image on the feeder illustrating how the document should be placed - if it looks like a page with lines on it with a bent corner then it is face up.

Apr 22, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Instructions on installing & changing ink cartridges


Step ten: Install the cartridges
  1. Make sure the product is turned on. The On button is lit when the product is on.
  2. Lift the cartridge door. The carriage moves to the right side of the product. Figure 12: Lift the cartridge door c01331661.jpg
  3. Remove the new cartridge from its packaging and gently remove the plastic tape using the pink pull tab. Figure 13: Remove the tape c01331662.jpg CAUTION: Do not touch copper-colored contacts or retape the cartridges.c01331663.jpg
  4. Slide the tri-color cartridge into the left slot. Push the top part of the cartridge firmly up and into the slot until it snaps into place. Figure 14: Insert the tri-color cartridge c00620861.gif
  5. Slide the black or photo cartridge into the right slot. Push the top part of the cartridge firmly up and into the slot until it snaps into place. Figure 15: Insert the black or photo cartridge c00620862.gif
  6. Close the cartridge door.
Step eleven: Align the cartridges
  1. Make sure you have loaded plain white letter or A4 paper in the bottom tray. Press OK to print the alignment page.
  2. Remove the alignment page from the output tray. Figure 16: Print the cartridge alignment page c00620112.gif
  3. Place the alignment page face down into the document feeder. Figure 17: Load the printed alignment page c00620113.gif
  4. Press OK to scan the alignment page. After the page has scanned, alignment is complete

Apr 12, 2009 | HP OfficeJet 4315 All-In-One InkJet...

1 Answer

Saying "enter to align cartridges continuously


You need to press the enter key on the top of the printer to start the alignment. On some of these devices you will need to place the printed alignment page face down on the scanner and then hit the enter key so that the printer can read the printed alignment page.

Dec 29, 2008 | HP OfficeJet G55 All-In-One InkJet Printer

Not finding what you are looking for?
HP OfficeJet 4255 All-In-One InkJet Printer Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...