Cannot connect 2 wireless router

Connect to a Computer

You can wirelessly connect to your personal computer using an infrared connection.
You can physically connect your iPAQ Pocket PC to your personal computer using Microsoft ActiveSync and a USB cable.
You must have Microsoft Outlook to operate your iPAQ Pocket PC using Microsoft ActiveSync on your computer. If you do not have Outlook, install the Microsoft Outlook software from the HP iPAQ Pocket PC Companion CD.

Microsoft Outlook Express will not work with the iPAQ Pocket PC and ActiveSync.

What book/manual are you talking about?

emachine D6419 can be found at;
http://global-download.gateway.com/GDFiles/Document/User%20Manual/User%20Manual_eMachines_1.0_A_A.zip?acerid=633933437244339685&Step1=DESKTOP&Step2=D SERIES&Step3=D6419&OS=ALL&LC=en&BC=EMACHINES&SC=PA_6E

hp iPAQ Pocket PC h1910 - Reference Guide at;
http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000002238.pdf.

Good luck and post back.

You need an expansion card. SD 56k modem cards is recommended.
You can also use the built in WiFi to connect to a wireless router nearby

In order to sync your iPAQ with Windows XP or earlier, you will need to download and install Windows Microsoft ActiveSync 4.5 from:http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx.

Notes:
• You can use ActiveSync 4.5 only with phones that run Windows Mobile 2003 or later versions. ActiveSync and Windows Mobile Device Center won’t work with Windows Embedded CE 4.2 or 5.0, Pocket PC 2002, or Smartphone 2002 phones. (To see which Windows Mobile operating system you’re using, if your phone doesn’t have a touch screen, click Start > Settings > About. If your phone has a touch screen, click Start > Settings > System tab > About.) To sync information to any of these phones, you must use a USB or serial cable and your computer’s Internet connection and File Explorer.
• You must use Microsoft Outlook 2002, Outlook 2003, or Office Outlook 2007 to sync your e-mail, contacts, tasks, and notes from your computer.

Download and install ActiveSync:
1. Click the download link on this page, and then click Continue.
2. Select whether you want to register for the Windows Mobile newsletter, and then click Continue.
3. Click Download files below, and then click Download (next to the Setup.msi file).
4. In the File Download dialog box, click Run.
5. Follow the instructions in the Installation Wizard to install ActiveSync.

Note: You must use a USB cable to connect your phone to your computer the first time you use ActiveSync to synchronize information.

HP phones have a very fragile software. you could easily break it's radio part(cannot be used as a phone) or it could remain into bootloader. i don't recomand resofting.

a 1999 PC LT, runs windows CE?

step 1 is getting the correct driver for that PCMCIA (pc-card)
that matches Windows CE>
supported ended in 2010 , 7 years ago, why use this?

OMG , its so old it has NO USB PORTS !!!
sales ended 2005, 12 years ago on the card.
VISTA, XP,CE and all older OS , support ended long ago.
for sure microsoft Plug and Play severs. are now dead.


this PC has value of $0 at Ebay.
the only hope is endless, all day goggle searched the dard web
and finding CD drivers for PC-cards. and infections as door prize.

hi i am wolson so i have a problem with my pocket pc so i need connect it to the internet but i can't can you explain what i suppose to do please

It's not a phone. It's a pocket PC.
CAUTION: For synchronization to work properly, install Microsoft
ActiveSync on your personal computer before you connect your
iPAQ Pocket PC to your computer.
To install a CompactFlash (CF) or Secure Digital (SD) card into
an expansion slot on the iPAQ Pocket PC:
1. Locate the appropriate slot on the top of the iPAQ Pocket PC.
To identify slot locations, refer to the Getting Started
document that came with the iPAQ Pocket PC.
2. Before inserting a CompactFlash (CF) card into the CF
expansion slot, pull the plastic slot cover from the CF slot.
3. Insert the expansion card into the appropriate expansion slot
and push the connection edge of the card firmly into the
expansion slot.
✎If your expansion card is not recognized, follow the card
manufacturer’s instructions to install it.
✎For more detailed help, refer to the Help files installed on your
iPAQ Pocket PC. From the Start menu, tap Help > Connections.
✎To prevent power loss, remove any expansion cards from either
the CF or SD expansion slots before turning off the iPAQ
Pocket PC.
Your iPAQ Pocket PC supports 802.11b Wireless LAN (WLAN) technology using the expansion slot in the top of the device. Figure 1: Expansion slot To make your Pocket PC a WLAN device, you need:

• To purchase a WLAN CF or SDIO expansion card
• To have access to a wireless network

You need to install the drivers for it.

Xracer

Yes, I did. Actully for my model it is at the bottom. I used that along with RESET key - which makes 'Hard Reset' - but the same Red screen remains....

Have you looked into the Start-Settings-Systems and look for a Self-Test icon ? Normally Self-Test program reside there if it's on the Ipaq!