Question about Washing Machines

Open Question

F3 error on hotpoint aqualtis washer dryer

Machine only operates for around 10 minutes at a time, before the Attention washing machine blocked error appears. f3. does this mean the thermistor needs or might need replaced. or what? thanx

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
lisa_mcglynn
  • 2 Answers

SOURCE: AQGMD 149 Hotpoint Aqualtis washer dryer. Displaying the error: Attention the machine can not fill with water

my aqualtis aqgd 169 s washer says washer can not fill but water in it?

Posted on Nov 26, 2012

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aqualtis washing machine has error code F01 what does this mean?


F01 Electronic circuit board fault
Issue: Washing machine is not operating - some or all functions are not selectable.
Advice: We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply and wait 30 seconds and try starting the machine again.

Jan 14, 2016 | Hotpoint Aqualtis AQXXL129PM Washer Front...

2 Answers

I have a hotpoint aqualtis and i have a fault come up code fo5


F-05 is indeed the water outlet blocked. You need to clean it out, also possibly the pump, & Hoses.
http://www.howtomendit.com/answers.php?id=157950
See above.
http://appliancejunk.com/ge/washer/31-9135.pdf
Service manual above.

Aug 06, 2010 | Hotpoint Washing Machines

3 Answers

Trouble shooting the hotpoint aqualtis aqxxf149pi flashing f08


my hotpint aqualtis aqxxf149pi make a funny grinding noise when it spins help please?

Jun 25, 2009 | Hotpoint Washing Machines

2 Answers

Hotpoint Aqualtis LCD display language


Follow this link and read where to find your model # and insert it in the box. I hope this helps. http://genet.geappliances.com/DocSearch/Dispatcher?REQUEST=SEARCHWITHURLCONNECTION

Nov 30, 2008 | Hotpoint Ultima WD72 Front Load...

2 Answers

On a hotpoint aqualtis aqxx149pm i get error code f8 flashing


Hi.
F8 means that heater relay cannot be activated, you need to call an engineer.
Could be expensive, possibly a new control board needed

Nov 19, 2008 | Hotpoint WMA35 Front Load Washer

4 Answers

Aqualtis AQGD 169 S F12 problem Please help :-(


ok, I have just had the 'blocked pump message and after much playing around I have solved it.

Pull the machine out and take the drain out and place in a bucket. Then tilt the machine on its side about 30 to 45 degrees so you can get a hand underneath. At the front there is a black rubber pipe-squeeze this a few times and then run the machine on a pump cycle. Put water in machine (i used a bucket) and repeat. You should get the foul smelling gunk out of the pump. I did this about 4 times and finally the water comes out clean and you should be ok.

Regards and good luck,

Matt

Jul 01, 2008 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Brad Brown

Level 3 Expert

15633 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...