Question about Office Equipment & Supplies

Open Question

Xerox work centre 7120 reset - Office Equipment & Supplies

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
pineworks
  • 4041 Answers

SOURCE: Xerox Work Centre C2424 System Error

Hi there
I found some thing maybe do for you it may not be rhe right code you have at this moment but it come in handy for you.



082122a.jpg

31,004.40:6909: it's a mechanical initialization jam error. Pull out the paper tray to make sure it doesn't have a jam. Try also to manually feed some heavy paper or card stock through the printer to make sure the sensor in the preheater isn't stuck.

39,002.40 : DRAM test failure.

39,012.40:56208: "Cycle the power" and if that does not work replace the document feeder.

39,012.41: Document Feeder Optical Failure. Replace the document feeder.

4,0XX.6x: Process Control Software Fault.

· Reset NVRAM and then retest.
· Ensure ground integrity for the system
· Replace the EEPROM chip.
· Reboot the system.
· From the System Setup menu, go to "Information", "Troubleshooting"
· Service Tools menu.
· With the cursor at the top of the Service Tools menu, press both the Up Arrow
· and Down Arrow buttons to display the Hidden Service menu.
· Reset NVRAM is in there.

Also may be handy is this.


4,0XX.6x Process Control Software Fault
Error 04,041.66
Solution 1:

a. Reset NVRAM and then retest.
b. Ensure ground integrity for the system.
c. Replace the EEPROM chip.
d. Reboot the system.

1. From the System Setup menu, go to Information --> Troubleshooting -->
Service Tools menu.
2. With the cursor at the top of the Service Tools menu, press both the Up Arrow and Down Arrow buttons to display the Hidden Service menu.
3. Reset NVRAM is in there


Solution 2:

1. Turn the system power ON.
2. Wait for the Xerox logo to begin moving across the display.
3. Before the logo is centered on the display, press and hold the Back and Info buttons on the control panel.
4. Hold both buttons until the display reads “Beginning Service Mode Initialization”. Release the buttons and the system reboots into service mode with the Service Diagnostics menu displayed. Hope it will help you in some way of finding the fault. Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 03, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Xerox 7120 error code 093-320 reset


bonjour j'ai un code erreur sur ma xerox workcenter 7125 je trouve pas de solution si qlq px m'aide merci d'avance code 093-320

Feb 05, 2014 | Xerox DocuColor 240 All-In-One Laser...

1 Answer

Xerox 7120 activation code


i need activation code xerox workcentre 7120

Nov 25, 2013 | Xerox Office Equipment & Supplies

1 Answer

Sensor in copier


Developer motor failure.
Can either be in you C, Y or M drum or in the machine itself. Your choice what to do :)

May 27, 2013 | Xerox Office Equipment & Supplies

2 Answers

How do I empty the waste on a xerox 7120


Better off replacing it, if you google it , the price normally is $20 or less. But you can take it out and empty it into a garbage bag, but there is a clear plastic window that must be cleaned to allow it to reset. They are pretty cheap. Google The Parts Drop. Most likely they have them.

May 26, 2011 | Xerox WorkCentre M-24 Color Copier

1 Answer

Xerox work centre 7120 message say change waster toner, I found where it is but how do I change it


You can either dump out the waste toner into a garbage bag, or replace the whole toner collector. If you decide to dump it out yourself, you need to make sure that the container is extremely clean prior to reinstalling it into your copier, as sensors on the copier end detect the level of used toner by optic sensor.

-David.

Nov 03, 2010 | Xerox WorkCentre M-24 Color Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...