Question about Samsung ML-2581ND Duplex Laser Printer for Parts/Repa Refurbishe

Open Question

Toner exhausted printer showing red light

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 193 Answers

SOURCE: Samsung printer shows empty cartridge but clearly has toner

bad chip on toner cartridge.

Posted on Feb 20, 2009

anujtaluka
  • 392 Answers

SOURCE: toner exhausted

open the back cover and locate the chip numbered 93c66,its above the USB port on the mainboard.short the top-left and bottom left pins and turn the printer on for 5-10 secs...that resets the page count to 0... also either remove the chip on the toner or cover it with a cellotape

Posted on Sep 01, 2009

Testimonial: "it really helped me. I got the right solution, lot of thanks to you. now my printer is working fine. regards mahendra mendra11@rediffmail.com"

Nikola-MKD
  • 1 Answer

SOURCE: red light comes after refill

Download from this site http://sahat-tambunan.com/files/2009/Samsung-ML-1640-reset-raw.zip Raw Package for ML-1640 You will find 5 files in this package:

  • ML-1640_V1.01.00.83.exe is the official firmware upgrader
  • downl1640.bat is the firmware downloader (to printer)
  • fix1640.bat is the firmware patcher
  • fixml40.exe is the tools run by the patcher
  • usbprns2.exe is the tools run by the downloader
Unzip and start usbprns2.exe than downl1640.bat, at the end press any button and for 16 seconds you have printer reset.
And that is it, you are free to do what ever you want, but be careful if you reset with empty toner it will also show that toner is full.
Also the are no chip in toner, it is only mechanical part.cc156fa.jpg
Save the money for toner refill. See ya

P.S- Was this helpful? Say YES

Posted on Jan 05, 2010

  • 2 Answers

SOURCE: Toner exhausted replace toner in Laser Printer SCX-4300

My laser Printer shows a message and do not prints any document. When i try to print any document. My printer shows a message "Toner Exhausted, Replace Toner". Plz tell me how can i solve my this printer's solution.

Posted on Feb 15, 2010

  • 1751 Answers

SOURCE: Toner Exhausted Replace Toner" scx-4300

Hi

You need to raplce chip on cartridge

Pls vote me to keep me alive

Posted on Nov 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both Status light and black toner light are red. Dumped L-shape tray. Any help appreciated.


Dear
Pl. run the SMART PANEL on your pc and get a test print from your pc, the smart panel will indicate the description of the error.
from the black toner light red means black toner is going to or exhausted.

For smart panel you can follow the link and put your model in search box to down load.
Printer Support SAMSUNG India

Thanks.

Mar 16, 2015 | Samsung CLP 300 Laser Printer

1 Answer

Two red lights showing


I have Samsung ML1640 Printer, but it show some error report,,, toner exhausted and replace toner kit,, so i am suffering from this problem so how to reset page counter by manually any one know answer pls mail me anilkumar1225@gmail.com

I am waiting ur answer pls reply as soon as possible

Aug 03, 2013 | Epson Stylus R265 InkJet Photo Printer

1 Answer

How to solve toner exhaust problem of samsung ml 1866 priner


any problem inbangalore kindly contact vectracomm@gmail.com helpline 9448311575

Sep 18, 2012 | Samsung Office Equipment & Supplies

1 Answer

Red light


Error Red On

• The cover is open. Close the cover.
• There is no paper in the tray. Load paper in the tray.
• The printer has stopped printing due to a major error.
• The toner cartridge is not installed. Install the toner cartridge.
• Your system has some problems. If this problem occurs, contact your service representative.
• The toner is totally exhausted. Remove the old toner cartridge and install a new one.

Error Red Blinking

• A minor error is occurring and the printer is waiting for the error to be cleared. When the problem is cleared, the printer resumes printing.
• The toner cartridge is low. Order a new toner cartridge. You can temporarily improve print quality by redistributing the toner.

Aug 03, 2011 | Samsung ML-2851ND Laser Printer

1 Answer

My newly installed Samsung CLP-310 has a red light showing next to the <...> icon. Please could you help me to resolve the problem. Thx


Hi paulette,
if the light is red and TONER COLORS LED all LEDs off

• The machine is experiencing an error, such as jammed paper, open cover, empty paper, installed waste toner container, or full waste toner container.
• The machine is experiencing a service required error, such as LSU error, fuser error, or Contact your sales or service representative.

if the light is red and TONER COLORS LED each LED lights red.

• Each toner cartridge is totally exhausted. You can not print.
• Each toner cartridge is wrong.

Aug 01, 2011 | Samsung CLP 300 Laser Printer

1 Answer

Red light is on and won't print


The problems you checked are indicated by a blinking red light (it denotes minor errors). A solid red light usually means that one of the toners is exhausted. If you look in the task bar, there's a little blue S; double click on this to launch Smart Panel, our monitoring software. It will tell you the specific error message.

If one of the toners is showing empty already, are you sure this wasn't a used model or possibly a display unit that people would have been printing on?

Nov 30, 2010 | Samsung CLP 315 Laser Printer

1 Answer

My CLP315 WON'T PRINT - IT HAS THE RED LED LIGHT ON. HAVE CHECKED THE PAPER LEVEL, WASTE TONER CARTRIDGE NAD REBOOTED SEVERAL TIME BUT RED LIGHT REMAINS ON


The problems you checked are indicated by a blinking red light (it denotes minor errors). A solid red light usually means that one of the toners is exhausted. If you look in the task bar, there's a little blue S; double click on this to launch Smart Panel, our monitoring software. It will tell you the specific error message. If one of the toners is showing empty already, are you sure this wasn't a used model or possibly a display unit that people would have been printing on?

Nov 27, 2010 | Samsung SAM CLP315 COLOR LASER PRINTER

1 Answer

I have a ML-2510, I turned it on and both the red light and green light flash constantly. Will not feed or print.


The green light blinking means that it is accepting or printing data.
But, the red light is for the error messages. This blinking means there is a toner problem. 1. remove toner cartridge from printer and gently shake to redistribute any that is left, or
2. You simply have to replace the toner cartridge with a new one - this one has been exhausted.

Jul 09, 2009 | Samsung ML-2510 Laser Printer

7 Answers

Toner exhausted replace toner in Laser Printer SCX-4300


My laser Printer shows a message and do not prints any document. When i try to print any document. My printer shows a message "Toner Exhausted, Replace Toner". Plz tell me how can i solve my this printer's solution.

Mar 25, 2009 | Samsung SCX-4300 Monochrome Laser...

1 Answer

Samsung printer ML 2510 series


Maybe the toner is low... According to the manual, a blinking red light:

• A minor error is occurring and
the printer is waiting for the error
to be cleared. When the problem
is cleared, the printer resumes
printing.
• The toner cartridge is low. Order
a new toner cartridge. You can
temporarily improve print quality
by redistributing the toner. See
page 8.3.
• The toner is totally exhausted.
Remove the old toner cartridge
and install a new one. See page
8.4.
• The toner cartridge reached the
end of its life.

Feb 24, 2009 | Samsung ML-2510 Laser Printer

Not finding what you are looking for?
Samsung ML-2581ND Duplex Laser Printer for Parts/Repa Refurbishe Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...