Question about Symbol LS 4000i Handheld

1 Answer

Decodeing UPC-A Supplemental 2 or 5 code

I can not find how to get the scanner to read supplemental barcodes like the ones on the back of books. please help.

Posted by on

  • Anonymous Jan 29, 2009

    That helps a lot. I think I've been able to program my LS4000i but I still can't get any text to show up. I'm running Win2K and a PS2 setup.


×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 661 Answers

You should have a code book that came with the scanner, the code book allows you to program the scanner's options, the code book takes you step by step through the programming proccess. each option requires you to scan varios barcodes to "set" the various options one of the options will be to set the barcodes you wish to use, this is set to avoid a misread (confusion between barcode standards)

Posted on Aug 10, 2007

  • Gareth Cockram
    Gareth Cockram Aug 12, 2007

    I found this code book (you will have to print it out as you cannot scan barcodes from the screen)

    This allows you to program your unit to read & format how you want
    http://support.symbol.com/support/search...

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot read bar code


If it will not read any bar codes, then it must be repaired. If it only reads selective bar codes, then perhaps the one you are trying to scan may not be of the type it recognizes.

This scanner will read the following codes: LS 1004/LS 1006: UPC/EAN, Code 39 full ASC11, Code 128, Code 93,
Codabar, Interleaved 2 of 5, Discrete 2 of 5; LS 1000: undecoded

Mar 09, 2015 | Symbol LS-1006 (ls1006i0001900z) Handheld

Tip

How do I create a UPC Code Labels?


<p>Universal Product Code (UPC barcode) is numeric, computer-readable tags used to track products in a store or warehouse. GS1 is the only body that the numbers of the original UPC barcode can give companies in the United States. The acquisition of authentic bar code numbers for your UPC labels, you need a partner and GS1 bar code numbers for your payments. <br /> <p><br /> <p>1. Suppose your company expects annual turnover, number of products that will sell that require UPC bar codes, contact information and your business. <br /> <p><br /> <p>2. Go to the site of GS1 and GS1 U.S., apply for the program Connections partners. Pay your membership online by credit card, or follow the instructions as part of an application to send a check. <br /> <p><br /> <p>3. Log on to the GS1 site a day after your membership is processed to determine your company's prefix number. This number is unique to your company and is an essential part of your bar code numbers. His company prefix, the first 2-6 numbers of the barcode. Download your number of UPC bar code on the site of GS1. <br /> <p><br /> <p>4. Print your labels, UPC bar code at home or third company to print. You can choose to print bar codes directly on the product packaging. <br /> <p><br /> <p>5. Make sure your UPC barcode labels and height requirements for the color of GS1 distribution of your product needs. Labels that do not meet these requirements cannot be read by machines, bar code scanner. <br />

on Jun 26, 2011 | Computers & Internet

1 Answer

Scanner won't scan library barcodes.


The barcode reader is something that the backup software typically uses to identify which tape it is dealing with.
So typically your backup software can already natively read the barcode and therefor you don't need any other software.
The linked barcode reader is probably for reading a barcode that was provided via a picture (from a scanner or camera). This has nothing to do with the barcode reader that can be part of a tape library. NET UPC Barcode Reader

Dec 14, 2012 | Datalogic QuickScan I QD2100 Wired Wand...

3 Answers

Im trying to get my ls2208 scanner to read comic book barcodes its 13 plus the 5 digit extension can i get some help with this. im running windows vista 64bit not sure if that matters or not.


Just take a Print out this PDF file and Scan the Barcode
1st u need to scan the enable Interface Barcode then Scan Any barcode Length

Cheers
Hope its solves
9_30_2011_11_17_41_am.jpg

Sep 05, 2011 | Symbol LS2208 Handheld

2 Answers

My scanner reads only12 numbers not 13 numbers from barcode what h do?


Perhaps you should ask for replacements and ask for a bar code scanner who reads 13 numbers because even how many times you try it over and over again if the function of the scanner is limited in reading 12 number the results will be the same..Hope it can Help you.

Jul 02, 2011 | Metrologic Instruments 9520 Voyager

1 Answer

I bought a quick check scanner (QC8501) but I don't know how setting I need because the verifier can't read the barcode of the labels (UPC code) and (serial number code). Please tell me the setting that...


You can get a user guide here: http://www.honeywellaidc.com/en-US/Pages/Product.aspx?category=Verification Systems&cat=HSM&pid=QC800

You need to read through it to get to know all the features of the verifier.

Apr 07, 2011 | Honeywell Hand Held Quick Check 850...

1 Answer

I have an IT3800 scanner and use it in a gift shop. My products have "regular" barcodes, those with 5 digits added and ISBN barcodes. My scanner stopped scanning the extra 5 digits. I went to the IT3800...


What you need is to turn on Digit Addenda for the types of barcode you are trying to scan. Here is the user's guide:
http://www.geoti.co.kr/DATA/hhp/IT3800_3900%20Users%20Guide.pdf
Please check page 7-30, where you will find the codes to turn on the supplements for EAN 13 barcodes (those with 13-digit). Also, if you don't want the scanner to insert a space between the main code and the additional digits, you have to turn off addenda separator (page 7-31)
There are similar configuration codes for other symbologies (like UPC A) throughout the manual.

Hope it helps!
best regards!
Rafael

Sep 01, 2010 | HHP IT3800 Handheld

2 Answers

Hi, i am trying to configure my barcode scanner LS2208 to put a {TAB} in when scanning


There should have been a sheet or book of bar codes that came with your scanner. These codes will allow you to program your scanner to do most anything, including adding a tab. You simply look at the bar codes and read what they do. you simply scan the one that adds a tab and it will forever add the tab unless you re program it.

If you have lost your book/bar code page, you should be able to go to the manufacturer website and download/print a document with the programmable bar codes.

Feb 26, 2010 | Symbol LS2208 Handheld

1 Answer

I would like 2 know the model number/name of a barcode reader , also want 2 convert the 12 digit to 13 digit reading


If you want a cheap but reliable scanner try the LS1203 by Motorola (formerly Symbol) with any Symbol scanner to convert a 12 digit UPC into a 13 digit number you scan the UPC-A Enable System Character Country Code from the appropriate Product Reference Guide. The guides can be found at: http://support.symbol.com/support/supportcentral/supportcentral.do?id=m1

Hint: When searching change the Document Type to Product Manuals before hitting enter or clicking Go to reduce the search results to relevant documents.

Jul 07, 2009 | Symbol Computers & Internet

3 Answers

Ean 13 problem


you are probably reading to a inteligent software package like Excell, which sees the inputted data as a number (so ignores leading zeros) you need to specify to the sytem that the incoming numbers are TEXT not numbers.

Sep 30, 2008 | Symbol LS2208 Handheld

Not finding what you are looking for?
Symbol LS 4000i Handheld Logo

Related Topics:

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Computers & Internet Experts

Michael

Level 2 Expert

51 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...