a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
For this specific issue about installing the printer to a wireless connection. You need to install the software first as a usb connection. After the successful installation of the usb connection then you can add a device and it should work.
Step one: Gather the necessary hardware and information
Follow the procedure below before obtaining your wireless network:
Obtain your network SSID and WEP. To simplify this process, press the Wireless button on the all-in-one, and select Restore Network Defaults .
This turns wireless off and sets the all-in-one's SSID to hpsetup .
Press the Wireless button to turn wireless back on. Look for hpsetup when you select your network.
Make sure that wireless is enabled on the all-in-one.
Make sure that the computer that will be using the all-in-one has access to the router/access point.
You will need the following to set up the product on a wireless network:
A wireless 802.11 network that includes a wireless access point.
A desktop computer or laptop with wireless networking support or a network interface card (NIC).
Broadband Internet access is required for some features of the HP software to function. Cable Internet or DSL are examples of Broadband Internet access.
If you connect the unit on a wireless network that has Internet access, HP recommends that you use a wireless router (access point or base station) that uses Dynamic Host Configuration Protocol (DHCP).
The network name, or Service Set Identifier (SSID).
The SSID is obtained from the wireless router or access point using the embedded web server on the router. See the documentation provided with the access point for more information.
The Wired Equivalent Privacy (WEP) key or Wi-Fi Protected Access (WPA) passphrase, if needed.
To prevent other users from accessing your wireless network, HP strongly recommends using a password or passphrase and a unique SSID to your access point. Your access point might have been shipped with a default SSID, which can be accessed by other users using the same default SSID. For more information on how to change the SSID, see the documentation that came with your access point.
The WEP key and WPA passphrase are obtained from the wireless router or access point using the embedded web server on the router. See the documentation provided with the access point for more information.Some access points provide more than one WEP key. Use the first WEP key (index 1) when setting up the wireless network.
If the network is set up with an Apple AirPort base station and you are using a password instead of WEP HEX or WEP ASCII to access this network, you need to get the equivalent WEP key. See the documentation that came with the Apple AirPort base station for more information.
If IP address filtering is set up, verify that the unit address is listed.
If MAC address filtering is set up, verify that the unit address is listed.
HP cannot set up or change the SSID, WEP key or WPA passphrase. This information is required before connecting the HP All-in-One to the wireless network.
Step two: Connect to an integrated wireless WLAN 802.11 network
Follow the procedure to connect the unit to the wireless infrastructure network:
Insert the software CD.
Click Install .
Click Next on the Please Allow All HP Install Wizard Processes screen.
Select Easy Install on the Choose Easy Install or Advanced Install screen.
Select Through the Network on the Connection Type screen.
Figure 2: Connection Type screen
When it doesn’t find your device, click Next .
Figure 3: Using Network Setup
Plug in your device via USB (it will tell you when to disconnect later).
Figure 4: Making a connection to your all-in-one
Select your network from the list, and click Next .
Figure 5: Wireless Network Setup
Enter your WEP key (if applicable).
Figure 6: Specifying your network security settings
Once it has completed connecting to the network, click Next .
Figure 7: Network connecting completed
Disconnect the USB cable from the computer and the All-in-One .
Figure 8: Disconnecting the USB cable
Click Finish to complete the software installation process.
Figure 9: Software installation complete
How Can I connect a network adapter from my room to downstairs about 20 yards away? I need XBOX LIVE badly, everyone has it cmon FIXYA help me out on this. The router downstairs is a TalkTalk modem help me!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check out your manual and look for the section regarding connecting to your home network. The tv set must detect the network for it to properly set up the connection after you give it the name and password to your account.. Check for the network working properly with your laptop or other device(s). If those units connect then the problem has to be with the wireless circuits of your tv.
Can also try resetting the set to factory condition and starting anew with the setup procedure. Also unplug the set while it is on - then while unplugged press in the "on" button on set for about thirty seconds. Then replug set and try again.
Check the videos to understand how set up the network connection on sharp tv . Hope it would help you to set up your tv. If you go for manual connection the you have to have some information . you can get those information from your internet provider comcast. http://electro-medical.blogspot.com/
First, please stop typing in capitals. It is the internet equivalent of shouting at someone. Would you be happy if some oik stood in front of your sainted mum and shouted at her? It's very rude. Please don't do it.
Now, to answer your question...
The connection of WiFi serves a different purpose to any connection of your TV to your computer. They are different things.
The WiFi connection is how your TV communicates with your home network and the internet. So it is a connection to the wireless router. Your TV needs to have wireless built in and active. Some TVs ship with the potential for wireless, but the dongle that acts as the wireless receiver is an optional extra. Does your TV have fully functioning wireless, or do you need to buy something extra?
Once you know you have a TV that is fully enabled for wireless then there's a set up routine you need to follow. It varies from brand to brand, and since you decided not to tell us the make and model of your TV then the best anyone can do is give some generic guidance.
Go in to the TV's network setup menus. Have a look to see if it is picking up yours and your neighbours wireless networks. If not, check if there's an option to toggle between wired and wireless set up.
Once you have it seeing your router and the house wireless network then select Connect and put in the wireless network password for your house network. This is often done using the remote controls 0#9 keypad like sending a text message. Make sure you put in the password correctly including any upper and lower case characters.
That's pretty much it for a network connection. There are other things that can stop or slow down a wireless connection. But if you're struggling just to type the password in correctly, then diagnosing and fixing those other issues might be a bit of a stretch for you.
As for a connection to your home PC. This is done for playing files from the PCs hard drive. It requires setting up some shared folders on the PC and making sure that the file format of any videos and films is compatible with the TV. Refer to your TV manual for the specifics.
"On theHisenseTV sets there is a Digital Coaxial audio output available on the side of the TV set ... The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to configure devices that are connected to a network" http://www.hisense.co.za/support/faq_tvs.asp
Well it seems to be an issue with the security setup on the wireless router. Please perform the below task to configure the settings on the router:
1. Open a web browser (Internet Explorer, Mozilla Firefox or Safari) on a computer connected to the router. 2. Access the router's GUI by typing 'http://192.168.1.1' or 'http://www.routerlogin.com' in the address bar. 3. When prompted for Username and Password, please enter 'admin' for the Username and 'password' for Password. 4. Click on Wireless Settings'(under Setup) from the left menu. 5. Select security options as 'WEP (Wired Equivalent Privacy)'. Set the 'Authentication Type' as automatic. Set the 'Encryption Strength' as 64-bit. 6. In Key 1 type a 10 digit number. Apply the settings.
Please connect your TV to the network using the password as set above.