Question about Philips DVD 622 DVD Player

1 Answer

Progressive scan By mistake I clicked on progressive scan from menu > video. The screen is all black since then and I can only hear sound, cannot view any picture. Please advise

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: progressive scan

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I was playing with settings on my Zenith xbv342 and set the menu to progressive scan. I now have a blue screen with the words "progressive scan mode" I cannot get a picture and it is stuck in this m

Progressive scan mode is used by DVD players to artificially scale standard resolution DVDs to HD resolution, usually 720i. Is your set capable of receiving HD resolution? If not, that is probably why you are getting the blue screen.

Dec 18, 2014 | Zenith XBV342 DVD Player/VCR

1 Answer

HI i put my DVD on progressive scan by mistake ... i try to press on STOP for 5 seconds ...but nothing change ...i have sound but no picture ??

Try getting the Green component output and put it on the Yellow composite input. Your picture should be black and white. Then you can see the video to change the resolution back to where you need it. Hope this helps.

May 29, 2011 | Zenith DVD & Blu-Ray Players

1 Answer


According to the operating instructions (page 97), Progressive Scan can be cancelled (or turned off) by pressing and holding PAUSE (on the main unit) continuously for 5 - 10 seconds, until the progressive indicator goes out, or turning it off in the setup menu. Your recorder should now be back to normal interlace video output. I recommend that you check your setup menu after this procedure to make sure nothing 'AUTO' is set, that shouldn't be set, and subsequently turning off any function that isn't required.

Apr 30, 2011 | Sony RDR-VX515 DVD Recorder/VCR

1 Answer

RDR-GX315 was accidentally reverted to "Factory Settings" ... now we can get sound but no picture and progressive is turned on and we need to turn it off.

If your TV has progressive scan capability, you may be able to view the on-screen setup menu via the recorder - select 'SETUP' press 'ENTER' on your DVD recorder's remote to bring up the menu - with the remote arrow buttons, scroll down to select 'VIDEO' then 'PROGRESSIVE' - highlight it then set it to OFF (you cannot do this with a TV that does not support progressive scan from this unit). Once done, exit the setup menu and it should work fine with all the other settings. If your TV doesn't have progressive scan, connect the DVD recorder to one which does and turn its progressive output off there. I assume you still have the user manual for your recorder (if not, you can download it online for free as an Adobe document - .pdf. Page 73 details the setup steps for this model). I hope this tip helps somewhat.

Feb 11, 2011 | Sony RDR-GX315 DVD Recorder

1 Answer

Cant turn off progressive scan

Press OPEN/CLOSE on the DVD player
to open the disc tray.
Press numeric keypad ‘1’ on the
remote control for few seconds.
➜ The DVD blue background screen
will appear on the TV.

Aug 24, 2008 | Philips DVD 622 DVD Player

1 Answer

Progressive Scan

Hold the stop button for about 10 seconds. The other thing to do is move the video out cable at the back of the DVD to one of the component outs (there are three of them one for each color rgb) you will be able to read the menu again. turn off progressive scan and reconnect the video cable to dvd out

Jan 04, 2008 | Zenith XBV442 DVD Player/VCR

1 Answer

DVD player wont show picture

to turn it off select connection method 3 above and progressive scanning mode, to set the mode, set progressive to off in the display menu so that the p scan indicator light on the front panel goes out. do all of this in interface mode. you can also do this by pressing and holding PLAY > on the front of the unit for more than 5 seconds, still watch for the p scan indicator to go off. this works best when the unit is connected directly to the television.

Dec 04, 2007 | GoVideo Go Video DVD/VCR Combo

5 Answers

How do you take progressive scan off

eject the tray and press the stop button for 5 - 10 seconds...if not stop then try pause button

Nov 17, 2007 | TruTech TT320

5 Answers

Black screen- cannot view pictures, can hear sound

ok do one thing,connoet rca video pin in component socket.. so that you can see bblack n white picture.

Aug 06, 2007 | Philips DVD 622 DVD Player

Not finding what you are looking for?
Philips DVD 622 DVD Player Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips DVD & Blu-Ray Players Experts


Level 1 Expert

6 Answers

Cindy Wells

Level 3 Expert

4718 Answers

rugby prop

Level 3 Expert

426 Answers

Are you a Philips DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides