Question about Behringer Eurorack UB1832FX-PRO Showroom Demo

Open Question

My eurorack ub1832 dsp display is flashing

When I turn the Eurorack on the DSP display is flashing the number 8 and there is a clicking sound every time it flashes.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mikeymiddles
  • 58 Answers

SOURCE: AC POWER PACK BLOWN

David,   I dont like to be the bearer of bad news, but Behringer dissolved its service/repair center years ago.  In my opinion, this indicates little faith in the profitability of servicing Behringer products.  If the manufacturer wont even repair their own products, I wouldn't buy or use that brand if I had a choice.  Their products are good, WHEN THEY WORK.  They keep their prices low by using inexpensive, disposable quality components.  Most of their products aren't worth repairing.      Here are a few options to find your power supply.  Try Rogue music in New York, NY.  Here is the web address.
www.roguemusic.com

Here is another resource.  DBM pro Audio is an authorized Behringer Repair Center.  They are also in New York.  They will be able to tell you if your part is available from Behringer.  I'm very sorry to inform you of the inferiority of Behringer products.  I think the truth, though it hurts sometimes, is the best teacher.  P.S. if you ever visit DBM... next to the elevator, outside DBM's office is a one yard dumpster, it is always brimming with the carcasses of unrepairable Behringer mixing consoles.      Remember, when buying electronics, you get what you pay for...cheap price = cheap components (and usually headaches down the line) Good luck!  I wish you success on finding your power supply.  Michael Mittelsdorf
www.dbmproaudio.com

See my profile for my qualifications. DBM does all my electronics repair.

Posted on Jan 10, 2009

satavlad
  • 405 Answers

SOURCE: BEHRINGER EURORACK UB2442FX-PRO Problem/

It is right and it ease enough to replace OP AMPs, if you have an experience with surface mount components.

Posted on Nov 09, 2009

  • 5603 Answers

SOURCE: Need Behringer Eurorack mixer power supply connector

Those were used for mic connectors at one time,,, they are related to the Amp 91-MC3F family of connectors and those are out of production and they are demanding $20 to $50 for one connector.

That is a ridiculous price and I would be tempted to swap out the connector for a more available design.

On eBay item 250401122616 is one but they want $13 pus $11 shipping which is a rip off.

These were used on some OLD CD radio mics.

Posted on Dec 15, 2009

  • 5603 Answers

SOURCE: Power supply cooked

There isn't anything in the power supply you cannot rebuild except the transformer.

BUT you should verify that something in the mixer didn't short out and damage the supply.

After you relace the smoked parts (likely the TOP245Y offline regulator chip is gonzo... then you use this trick to restart the unit safely:

Put a 60 Watt light bulb in series with the hot side of the input power line. I would recommend you use an ISOLATION transformer when working on the power line side of this for safety.

Posted on Apr 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My EURORACK UB2442FX-PRO has audio coming in but nothing coming out...


The outputs of these mixer needs to be connected to an active speaker.

An active speaker have an amplifier and a preamplifier.

Oct 02, 2012 | Behringer EURORACK UB2442FX PRO Mixer

1 Answer

Behringer Eurorack UB2442FX - PRO mic inputs are intermittent


Check the type of microphones connected and set the proper settings,

and connect it to other mic inputs .

May 21, 2012 | Behringer EURORACK UB2442FX PRO Mixer

1 Answer

Behringer mixer Eurorack UB802 is losing partial stereo signal in one channel. When I record (audacity software) I can hear both channels but displays one channel. Is it my computer's audio jack t


Sounds like the output cable from the 802 is not correctly pinned to your input on the computer. Fred is on the right track but you may need to take it a bit further.
It may also be helpful to use a Pro USB audio interface such as the Digigram UAX220v2 (line level version).
If you wish to use the computer's on board sound card consider an IHF/Pro interface that converts balanced audio to unbalanced , and the proper cables. Two 3-wire balanced 1/4-inch from the 802 to the left and right inputs of the interface (XLR Male), then RCA (Red and White) to a 1/8-inch TRS Plug cable onto the the computers audio input.
Henry Engineering's Matchbox HD comes to mind.
Good Luck.

Apr 24, 2012 | Behringer Eurorack Ub802 - Ultra Low-Noise...

1 Answer

SETTING CLOCK ON JENSEN PHASE PCD120U


Display Selector (DSP)
This unit can display either the clock time or
radio frequency/CD player functions. Ordinarily,
the radio frequency or CD player track
indication is displayed, but the unit will display
the time when the DSP button (18) is pressed.
The time will display for approximately 5
seconds then return to the radio or CD player
function display. The correct time-of-day can be
set by pressing and holding the DSP button.
Setting the Clock
To set the clock, perform the following steps:
1. Turn the vehicle ignition and radio on.
2. Press and hold the DSP button (18) until
the time display flashes.
3. Within 5 seconds, turn the MULTI/JOG
control (3) clockwise to adjust the minutes
to the desired setting.
4. Turn the MULTI/JOG control counterclockwise
to adjust the hour and the “AM”/

Jan 28, 2010 | Vehicle Parts & Accessories

1 Answer

My behringer ub2442fx pro has the numbers 88 flashing red in the display and a clicking sound every time they flash. any idea what the problem is?


A high likelyhood of a power supply problem.

I had a similar thing on a GX110 and it was an electrolytic cap that filters for the 5 volt regulator on the DSP board.

As the DSP starts up, the load on the supply sucked it below the operating point and caused the DSP to keep reseting. The display did flash.

The unit will have to be opened and trpunbleshooting done to find and repair the problem.

Dec 20, 2009 | Behringer Music

1 Answer

Just bought refirb. Onkyo 805, hooked up front l&r plus sub and getting no sound. I set up am and fm as per manual and connected a cd changer thru the cd in via rca cables. Radio shows a signal but no...


After few sec when you turn on your receiver did you hear a click noise ? if yes your receiver is OK not in protection mode if no click noise is output protection in that case you must return where did you buy for service and update firmware a lot of update
However you can reset your receiver and debug the DSP section ( digital signal processor ) as follow
To reset
1. Press and hold down VCR/DVR button, then press STANDBY/ON button when the unit is Power on.
2. After " Clear " is displayed, the preset memory and each mode stored in the memory are initialized and will
return to the factory settings, and turn to Standby mode.
Now turn back on and check if it work or not and make sure check input mode such as analog or coaxial or optical input if stil no sound then debug DSP as follow
To set in DSP debug mode
1. Press and hold down DISPLAY button, then press STANDBY/ON button while the unit is powered ON.
The version number of m icroprocessor is displayed only for 3 seconds.
Main:
8 1.05/07903A
2. Press TONE+ button within 3 seconds above, the version number of 1st DSP is displayed.
DSP 1st:
SR8051:07601A
3. Press DISPLAY button while the 1st DSP version is displayed. The status of DSP and DIR will be displayed.
E1A48K0N/0FFPo
FFFFFF0 0 000
To exit
Press STANDBY/ON button.
Then unplug the unit for 30 sec then plug in it should work now if not you need to return it to 1 of the service center Onkyo in your town to repair it
Good luck

Nov 30, 2008 | Onkyo Audio Players & Recorders

Not finding what you are looking for?
Behringer Eurorack UB1832FX-PRO Showroom Demo Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Alvan Dawkins
Alvan Dawkins

Level 1 Expert

2 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Are you a Behringer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...