Question about Televison & Video
My proscan tv keep blinking what do I do to make it stop
I would say it is your power board capacitors that have failed. Easy cheap fix if you can solder.
Posted on Apr 27, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Get a universal from big box and program. If you can find a rca remote, it should be programmed already.
Posted on Jun 08, 2008
SOURCE: Proscan TV powerup
When TV does not start, and sometimes you hear a clicking noise, that means that the TV is on protect mode.
Try first leaving the TV power cord unplugged for some times, let say one hour or so.
Also ensure that the fault is not coming from a faulty receiver box sending bad signal, check if you get same problem with no receiver box or dvd connected.
If that does not work, and you keep having a flashing led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition.
The flashing light indicates a diagnostic state called protection.
When the TV goes on protection there are only two possible reasons.
1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.
2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , startingthe flashing light.
If you are in situation one, then theTV will reset just unplugging power cord for one or two hours,sometimes even minutes.
If you are in situation 2 , then there is an internal fault.
Common faults that can occur are a blown capacitor on power board, a convergence IC has blown, or a fault on Digital board.
Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.
If under warranty contact the manufacturer ringing the number on the user manual
If you want to repair at your own expenses, just locate any good qualified repairer.
Posted on Apr 17, 2009
Tips for a great answer:
Nov 22, 2016 | Proscan Televison & Video
Jan 25, 2016 | Proscan Televison & Video
Jun 28, 2011 | Proscan 42LED55SA 42 in. LCD TV
Dec 29, 2009 | Proscan 32LB30QD 32 in. LCD TV
May 16, 2009 | Proscan 32LA30Q Television
Feb 17, 2009 | Proscan 32LA30Q Television
Aug 18, 2017 | Televison & Video
121 people viewed this question
Usually answered in minutes!