Question about Music
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This would indicate a problem with the scanning matrix for the keys. I don't have my schematics handy right now, to analyze which part might be bad...
FIRST though, check the settings for the keyboard splits on the utility page that has the splits. I have had this get clobbered and caused an unwanted transposed voice to sound..
If you can find other combinations that cause the problem that would aid in pinpointing the exact cause.
This could be a bad disconnect diode or short or break on the keyboard contact board or even a cable between the upper and lower contact boards. (The keyboard contacts are actually split into two groups high and low).
Please be careful in opening the unit. There are lots of screws and some in wells in the back. There are different threads and lengths, Make sure they go back correctely. Be VERY careful of the ribbon cables and their orientation. ALSO the power switch leads are very short... I often remove the switch rather than try to take the leads off.
I can try to find my schematics but that will take a while. If you are not comfortable working on electronics, this is a problem for the shop.
Posted on Jun 23, 2010
You need a new laser or laser mechanism. You can order one online no problem. The part number is: Sony KSS 213Q. make sure there is a Q at the end of it because sony makes a lot of different laser types and the one inside the Stanton C.324 is the Q. Yes the C.324 has Sony guts. You might also want to look into ordering a RF Signal Processor Chip. the part number is: CXA 2581N. Once again make sure the part number ends with a N. This part you might have a little more trouble finding online but it is possible. The laser mechanism you can find on Ebay for about 20$ to 30$ and if you order it from stanton magnetics it will run you about 200$. The signal processor I bought the other day from a Sony parts Dealer in my home town for 20$. Im having an Electronics Repair place do it for very cheap. If you send your stanton c.324 to stanton magnetics you will end up paying more than the turntable is worth brand new unless you have valid warranty still on it.
Hope I could help you with the problem. Cheers.
Posted on Jan 06, 2011
Tips for a great answer:
Jul 14, 2014 | Fender Music
Jan 11, 2011 | Tascam 2488mkii 24 Track Recording...
Dec 27, 2010 | Tascam 2488mkii 24 Track Recording...
Dec 10, 2010 | Tascam Ga30cd Guitar Amplifier with CD...
Nov 30, 2010 | Tascam 2488mkii 24 Track Recording...
Aug 28, 2010 | Tascam Music
Jan 25, 2010 | Tascam Music
Jun 30, 2009 | Crate Blackheart BH15 112 Handsome Devil...
15 people viewed this question
Usually answered in minutes!