Need to use officejet 1175C printer with my computer with window vista and cannot find dowloads for it

how can i get drinter driver software for my computer has wivdow vista ultimate

Hi, I have a similar problem with power on of my HP Officejet 1175c as it does not turn on, when I press the turn on bottom. But if I wait some minutes it might power up for a few seconds and then turn off again. I have tried then to press the "Menu bottom" for a second, and it then sometimes power up and once it is up and warmed up it might print for hours, if you keep it busy. But if you leave it for a while, it normally turns off again and goes back to the "turn off / turn on" switching mode.
I cannot turn off the printer, but has to let it fall into "sleeping mode" and then takes the power from the source.
Does any body have a better more permanent solution, I would really like to have it. Could you replace the power on switch or unit?
Best regards Dan

Hi,

You can use the Hp printer in windows 7 Os, here is the below software web link. HP officejet printer 6310 is work with xp, vista and Windows 7.

ftp://ftp.hp.com/pub/softlib/software11/COL30951/mp-76831-1/AIO_CDB_Net_Full_Win_WW_130_141.exe


regards

Pradeep Kumar

I don't know what you downloaded but it was surely not the driver - since that printer never had one for Vista. Sorry, you cannot use it on Vista. For that you will have to buy a new printer or keep using XP.

DRIVERS
click on the Printer

HP Officejet Pro 8500 All-in-One Printer - A909a

HP Officejet Pro 8500 Premier All-in-One Printer - A909n

HP Officejet Pro 8500 Wireless All-in-One Printer - A909g

for following Operating System
» Microsoft Windows 7 (32-bit)
» Microsoft Windows 7 (64-bit)
» Microsoft Windows Server 2008 x64
» Microsoft Windows Server 2008 W32
» Microsoft Windows Vista
» Microsoft Windows Vista (64-bit)
» Microsoft Windows XP» Microsoft Windows Server 2003
» Microsoft Windows Server 2003 64-Bit Edition
» Microsoft Windows 2000 Server
» Microsoft Windows XP x64
» Microsoft Windows 2000
» Mac OS X
» Linux

their is an option for windows vista...if you download that program it wil not be compatible with the printer and software....for windows vista

the reason why you cant install the software of your printer to your windows vista might be because the cd that you have is for windows xp or 2000. You need to get the exact software for the printer you can go to www.hp.com/support and download there your software for the printer

AHHHHHHHHHHHHHHHHHHHHHAHAHAHAHAHAHAHAH I FINALLY GOT IT!!!!!!!!!!!!!!!!!!!!!!!!!!!! MAN I WAS AT THIS SINCE 12:00AM LAST NIGHT AND i FINALLY GOT MY T65 TO WORK ON VISTA................................................


Use the driver for K60xi in the vista driver database... install your printer manually and choose that driver...........


phew, i almost sold my printer today and said I would try it one more time.......

Un-install the printer from the computer using Add/Remove programs from the control panel.

Disconnect the USB cable that connects the printer to the computer.

Go to HP's web site and download the VISTA drivers and install them. When prompted connect the USB cable and wait for the setup to finish.

If the printer still does not function you will need to check with HP technical support as they are still updating some of their software to be FULLY COMPATIBLE with Vista.

This model is discontinued and, according to HP, unsupported now. They do not have, nor will they have drivers/support for it. You can not even BUY a driver CD for them to send, as they don't offer one.

BUT.. if you go onto HP's Live Chat and tell them you need drivers, etc., they'll tell you the same.. but they should also offer you a 'great bargain' -- which would be to upgrade to a supported model (newer) that is a refurbished unit at a 'minimal cost' (which I don't know what the amount is- sorry).

Just make sure you have your SERIAL NUMBER from the unit available.

Then you can decide if it's worth it.. or ...
second option would be to go out to a store and purchase a newer model.

Sorry... that's as good as it gets...there are no drivers posted anywhere for XP and this unit!

Maggie B