Question about Honeywell Electronics - Others

Open Question

How do you stop beeping when entering code for Honeywell 5103 Steel Security Safe-Digital Lock

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 518 Answers

SOURCE: have a honeywell home security

Since you didn't post the model name / number it's hard to help you. You may find literature on the unit HERE.

Hope that helps...

Geno

Posted on Mar 07, 2008

  • 1 Answer

SOURCE: Have a honeywell security box

This means you need to change the battery use your key to open it up the battery compartment is under the top of the box with a slide off cover

Posted on May 23, 2009

  • 80 Answers

SOURCE: Digital Electronic Security Safe S2120.

You will probably have to call a locksmith who specializes in digital safes, or you can contact hardline and give them the serial no. of the save and proof of purchase to get the code or key. You will probably need proof of purchase for the locksmith to.

Posted on Sep 19, 2009

SOURCE: sentry safe, enter codes and nothing

These safe are easily opened by a good locksmith. So if you have items in the safe you need to get out a safe and vault tech could drill it open and repair it for a small fee. I really don't think it is the chip probably just a stuck solinoid.

Posted on Aug 08, 2010

BElectric
  • 1140 Answers

SOURCE: I own a Honeywell safe digital 1.06 cu #2072 when

Hi,

If you are using the key, you don't need to enter a code. To open with the key only, please do the following:

1. Remove the key lock cover located beneath the digital keypad.

2. Insert one of the Emergency Override keys (2 included) into the bypass lock and turn to the left.
3. Pull the handle up and pull open the safe door.

I apologise if I have misunderstood the question. If you are unable to open the safe using either the key OR the code rather than the key AND the code, please post back and I will try to assist you further.

Regards,
BElectric

Posted on Dec 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unidentified vehicle. Where can I get a diagram that will show me where the security box is located so i can disable it?


safes, home safety & security, home improvement,...: Target

www.target.com/c/safes-home...security.../-/N-5xtsm
Target CorporationResults 1 - 60 of 89 - First Alert Digital Locking Steel Security Box, 0.27 Cu. Ft. $29.99.... Honeywell Small Steel Security Safe - Black (5101DOJ). $55.99.Securities safe - ‎Sentrysafe : safes - ‎Cash box : safes - ‎Gun safe

Sep 30, 2015 | Cars & Trucks

1 Answer

How do I change the combination on I have a paragon digital lock & safe


TO SET UP OR CHANGE A USER CODE

1. With the door open, locate the red button on the back of the door near the hinge.

2. Press the red button and listen for the beep.

3. Immediately enter your new passcode (3-6 digits long)

4. Immediately after entering your new passcode, press the "A" or "B" button on the keypad. Your new user passcode is now stored.

NOTE:

This safe stores up to 2 passcodes (a user code and a manager code). Entering a third code will erase the

first passcode entered.

SETTING UP OR CHANGING A MANAGER PASSCODE

1. Open your safe with the passcode you wish to change and leave the door ajar.

2. Press the "0" button on the keypad twice. Press the red button, listen for a beep and then enter your new user passcode.

New user passcodes may be 3-6 digits long.

3. Immediately after entering your new code, press the "A" or "B" button on the keypad. Your user code is now changed.

http://www.paragonlockandsafe.com/manuals/mastermanual.pdf

Aug 29, 2014 | Paragon Electronic Digital Safe Jewelry...

1 Answer

Set combination for paragon lock & safe


TO SET UP OR CHANGE A USER CODE
1. With the door open, locate the red button on the back of the door near the hinge.
2. Press the red button and listen for the beep.
3. Immediately enter your new pass code (3-6 digits long)
4. Immediately after entering your new pass code, press the "A" or "B" button on the keypad. Your new user pass code is now stored.
NOTE:
This safe stores up to 2 pass codes (a user code and a manager code). Entering a third code will erase the
first pass code entered.

SETTING UP OR CHANGING A MANAGER PASS CODE
1. Open your safe with the pass code you wish to change and leave the door ajar.
2. Press the "0" button on the keypad twice. Press the red button, listen for a beep and then enter your new user pass code.
New user pass codes may be 3-6 digits long.
3. Immediately after entering your new code, press the "A" or "B" button on the keypad. Your user code is now changed.

http://www.paragonlockandsafe.com/manuals/mastermanual.pdf

Aug 29, 2014 | Paragon Electronic Digital Safe Jewelry...

1 Answer

Can't turn off beep sound on keypad of my stack-on Security Safes Electronic Lock for a 16 gun safe


You can turn off the "Beep" sound of the keypad by entering the code 633.
To turn the "Beep" sound on, enter the code 66

Feb 17, 2013 | Stack-On Stack On 16 Gun Safe with...

1 Answer

Just put new batterys in safe . but safe will not stop bleeping what is the problem


Please follow these steps
Programming a user code
There are two ways to program a user code.
A 1. Press the Program key.
2. Enter the Factory Code. The green LED remains ON
while you enter the 5-digit user code of your choice.
After 5 digits are entered the green LED turns OFF.
(To enter a new User Code, repeat these steps.)
B 1. Press the red button inside the safe. The lock will
beep and the green LED will come on.
2. Enter a 5-digit user code.
(To enter a new User Code, repeat these steps.)
Keep your new user code secure.
For your records, please copy it here:
____ ____ ____ ____ ____
Programming a password
1. Press the Program key.
2. Press it a second time.
3. Enter your 5-digit User Code. The green LED remains ON.
4. Enter the 5-digit Password of your choice (any combination
except 00000.) After 5 digits are entered, the green LED
turns OFF.
(To enter a new Password, repeat these steps. To erase the
Password, press Program twice, enter your User Code and then
enter 00000.)

Battery replacement
Below When old batteries are removed for replacement, your Password will be voided; only Factory and User Codes will work. To
reestablish your Password, follow the directions above under
Programming a Password.
Key override
If your electronic lock fails or you do not have any codes
available, you may use a key override to access this unit.
1. Remove the battery cover, disconnect and remove the
battery holder.
2. Insert the skeleton key (second set of keys provided)
into the key hole inside the opening for the battery.
3. Turn the key to the right.
4. Turn the four bit key to the right.
5. Open the door.
Signals
Your electronic-lock safe communicates by means of several
audio/visual signals.
Red (Error) LED + three beeps indicates
one of the following:
1. You have pressed Program key out of sequence
2. You have entered an invalid code or password.
3. You have let 5 seconds or more elapse between key entries.
Green (Proceed) LED + single beep occurs
1. After entering each digit of Factory or User Code, or
Password
2. After pressing Clear key
3. After pressing Program key
Green LED only
1. Comes on after you enter a valid code/password and
remains lit during the 4-second period in which the safe
can be opened.
2. Comes ON in the Program User Code mode after you enter
the Factory Code and remains lit until you have finished
entering a 5-digit User Code.
3. Comes ON in the Program Password mode after you have
entered your User Code and remains ON until you have
entered a 5-digit password.
Yellow LED
Indicates low battery and will typically not turn ON until
battery has been in use approximately two years or longer.
Your electronic lock automatically performs a low battery test
during each lock use.
If a �low battery� condition is detected the Yellow LED will
come ON and remain ON during each subsequent lock
operation. (The lock will continue to function in a Low Battery
state, until battery failure.) The Yellow LED will turn OFF only
after three consecutive Good Battery readings or after the low
batteries are replaced. (Note: If the new batteries are installed
in less than 60 seconds the Yellow LED may come ON and stay
ON during the first lock operation before it returns to OFF.)
NOTE: It is recommended you replace the batteries after two
years, or when the yellow LED remains on.

Jan 09, 2011 | Safe International Electronic Digital Safe...

1 Answer

I NEED TO RESET THE MASTER CODE ON THE GORDON DIGITAL SAFE BUT I DO NOT KNOW THE OLD MASTER CODE


hi
menu > settings > security > change lock code > apply master code in place of lock code and press ok > enter new code what you want

Apr 14, 2010 | Safe International Digital Electronic Safe...

1 Answer

Setting alarm to beep when doors are opened.


If it is a honeywell product enter your code then 9

Jan 12, 2010 | Honeywell 5804 Ademco Wireless Security...

Not finding what you are looking for?
Electronics - Others Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honeywell Electronics - Others Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

74902 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Honeywell Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...