- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Depending on your level of skill and desire to have an invisible repair you have a few options.
From easiest and worst looking to harder/expensive
Use a marine epoxy, like marine tex or super mend. This could look Ok depending on your skill
you can get an acrylic/fiberglass repair kit.
or you could get someone who fixes hot tubs and bath fixtures to do it
and hire a better class of drywallers :)
There are about 6 pairs of springs to hold the bottom tube to the bottom chassis. If some of these came off from designed positions, the tube won't be in balance then the washer starts bouncing off. Make sure these pairs of springs in place then you have no problem.
I would send them to the drycleaners and point out the contamination.
If they were mine, I would treat them with a little white vinegar; the white deposits are caused by a buildup of calcium in your iron.
Don't put the vinegar directly on the trousers but use a clean cloth with some vinegar on it and gently massage the deposits.
It may stink, but it is wise to now and then run it warm (only) with some white vinegar which will dissolve the deposits.
Put it on a heat-proof surface (such as a stove grate) so it can stand flat otherwise not all of the deposits will get soaked with vinegar.
After letting it soak warm, run several tanksful of plain water to remove the vinegar and shake it over the sink in case there is chunks (very well could be) that have been loosened.