Question about Samsung Televison & Video
It sounds that there should be a dead short circuit in the power supply board's circuit. If you are not familiar with electronics, do not attempt to repair. Whether you suffer fatal electric shock. Instead, contact any experienced service technician, or the nearest service center.
Posted on Apr 26, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have the same issue with my LG 42PC3DVA and I narrowed it down to the Y SUS board. After a little research there are a few items that are prone to go. The ceramic fuses (as you found), sometimes the capacitors on the Y SUS, Z SUS, and power supply go along with them You can tell because thy will be bulged at the top instead of flat. I replaced a few of my capacitors - they are only $0.89 each so it was MUCH cheaper than a board.
The other thing that is common on the Y SUS in particular are the FETs (also called MOSFET). They can be replaced if you are good with a soldering gun but they are static sensitive so be grounded. They are also a bit tricky to test so you may want to do some research on how to determine if this is the issue... or you can just replace the whole board.
Posted on Oct 28, 2009
SOURCE: My 50
if the fuse was at the or near the AC plug chances are your got a power surge, if you did you got very lucky the fuse was there you might want to get a surge protector on the set ... But sometime you get just a defective fuse as long as the set is working I would not worry about it
Posted on Dec 07, 2009
You'll find some Samsung power supply boards here : http://www.usefulparts.com/index.php?main_page=index&manufacturers_id=11&sort=20a&filter_id=98&alpha_filter_id=0
but you have to open your TV first and find out model number
Posted on May 10, 2010
All you need to do is to open the back cover of the television to check for burnt transistor , this is always the problem , for you to fix this it require a basic knowledge on electronics,
Your power supply board is not yet dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
I hope this will help out in solving the problem
Posted on Dec 19, 2010
Tips for a great answer:
Feb 03, 2016 | Samsung Ln40e550 40 1080p Lcd Tv ln40e550
Jan 14, 2016 | Samsung LN52C530 52" LCD TV
Dec 21, 2015 | Samsung Televison & Video
Dec 20, 2015 | Samsung Televison & Video
Nov 10, 2011 | Sansui HDLCD-3212 32 in. LCD TV
Jun 25, 2011 | Samsung LN40B530 40 in. LCD HDTV
Jan 17, 2011 | Samsung LN40B530 40 in. LCD HDTV
Apr 29, 2010 | Samsung LE40R73BD 40 in. HD-Ready LCD...
Dec 31, 2009 | Televison & Video
Apr 13, 2009 | RCA 32V524T TV
Aug 19, 2017 | Samsung Televison & Video
Aug 18, 2017 | Samsung Televison & Video
49 people viewed this question
Usually answered in minutes!