AISET HEAT PRESS 3803 - Audio Players & Recorders

Hi Muhammam

Check this out...

http://www.printcopy.info/?mod=free&chap=erc&brand=Konica-Minolta&model=bizhub%20501&code=C-3803

FUSER ISSUE Need a tech to repair.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Utility/counter, details, stop00 stop01, system 2, soft switch/dip sw. settings first box (Left side) put a 3 middle box put a 1 third box change to a 0. DO this once comes back get a qualified tech to look at it your messing with the fuser (The hot part) it could catch on fire ruining a perfectly good day

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Perhaps you aren't tuning any stations. That would be a good first step toward audio. Install an antenna, too. "Tuned" and "stereo" are indicators there is a listenable station tuned in.

have guide read the guide it sure help you

Overloading? Could have a leaky component in the driver amp or power output section.

Remove the batteries. Press and release each button. (If you have slide switches, you must move it to each positon and then press and release each button for each of the switches selections.)
Install the batteries and try.

http://www.d-mpro.com/users/getdownload.asp?DownloadID=213

On the Denon AVR-888 (and I presume others), you have to put the unit in "record" mode. This is covered under "Other Operations and Functions" in the manual. Here are the steps:
1. On the front of the unit, press the zone2/rec select button
2. Turn source select until "recout source" is displayed
3. Turn source select to choose the input source

Hope this helps.
Matt