Question about Vacuums

2 Answers

What does possessive noun mean - Vacuums

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.

  • Vacuums Master
  • 102,366 Answers

A possessive noun is a noun indicating ownership or possession. For example 'the story of the witness' can be turned into 'the witness's story'.
The possessive is shown by adding an 's to the end of a noun or just an ' after plural nouns already ending in -s. Examples:
the car of my mother = my mother's car
the teacher of our class = our class's teacher
the coats of the children = the children's coats
the covers of the books = the books' covers
the meeting of the bosses = the bosses' meeting

The possessive is also used as a shorthand for something that does not literally belong to that person or thing, it's used in place of 'of' or 'for'. Examples:
The ladies' room does not belong to ladies, it means that it is designated for the use of ladies.
A store that sells men's suits doesn't sell suits that belong to some men, it sells suits for men.
A book of Shakespeare's plays are not plays that belong to Mr. Shakespeare, they are plays written by him.

Posted on Apr 25, 2013

  • 4 more comments 
  • mahin
    mahin Jan 11, 2014

    thank you for your time.

  • mahin
    mahin Jan 11, 2014

    orne thank you

  • mahin
    mahin Jan 11, 2014

    thank you

  • mahin
    mahin Jan 11, 2014

    I like the idea of what I can see

  • mahin
    mahin Jan 11, 2014

    I am a very good boy.

  • mahin
    mahin Jan 11, 2014

    you can also be used to be a good idea


  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

What are the most important things

Posted on Jan 11, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I possess a DC25 vac cleaner & found a metal brkt on my living carpet, dimensions 12.5mmx110mm lg with slotted holes 4mmx8mmlg. @ 85mm cntrs. Could you please tell me if this slightly bent brkt. maybe...

I would be inclined to say no,Dyson usually have purpose built parts that have holes etc where they need them. It sound (Size & Shape of slots) more like a car stereo or similar hanger. I imagine it is fairly easy to bend also.

Aug 21, 2014 | Dyson DC25 Vacuum

2 Answers

My Sentria is possessed......when we put it in goes backwards!!!! Help???

I saw videos it may be the transmission because it makes your kirby easy to push. It is working backwards so it may be the gears. This video will work for any Kirby that has TechDrive

Aug 17, 2014 | Vacuums

1 Answer

What do the symbols and dial settings mean on the electrolux diplomat lx

Symbols..Question mark means "Put a bag in me", checkered light means : "Change me, I'm dirty"....pre-lit power light means: "You have Powaaa" to the unit and the thermostat light means the motor is too hot if it comes on, (most likely from a hose clog) and needs to cool down before the motor will run again. The settings on the control valve basically have to do with the auto shutoff when the bag needs changed. The lower the valve is turned, the more full the bag will get until it shuts off. Hope that helps!

Apr 24, 2014 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

Green light mean

The green light blinking means the belt so slipping. The green light being off means the brush is not spinning at all. The belt needs to be replaced at least twice per year for proper agitation.

Jan 04, 2014 | Kirby Vacuums

1 Answer

I need 5 possessive nouns that are places

Many of New York's cabs are yellow. Burger King's, Malls, Walt Disney's, The Earth's magnetic field

Oct 31, 2013 | Vacuums

2 Answers

How do I change the brushes on my hooverF5881-900 shampooer?

go to the web and see the instructional video.
However see the photo attached.
God bless you

Sep 27, 2012 | Hoover Vacuums

1 Answer

What does "lo" mean on

it mean low carpet hight

Dec 14, 2010 | Vacuums

4 Answers

My shark won't heat up or steam. Barely have used it.

Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";}

The heating element may have died or there is an obstruction...

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem


Feb 22, 2010 | Euro-Pro Shark Steam Mop - Gray/ Purple...

1 Answer

Roomba is dancing?

You are stuck on spot clean. Try removing the battery and reset it then try Full clean.

Feb 14, 2010 | iRobot 4160 Roomba Robotic Vacuum

2 Answers

My vacuum takes off in drive

Some months ago I fell over my K-G6 at nite. Later the handle appeared looser than normal. Gradually, it started having the possessed yank-you-off-your-feet feel. This week I carefully disassembled the chrome plated cowling cover the handle goes thru to look inside. Two top machine screws when the front hood is lifted, two rear screws in the plastic, a single center screw near the drive-neutral toggle and a single screw for the power cord strain relief. I removed the handle by taking the two large screws off. This allowed the cowling to come free. From the rear, on the left side is a lever with a two pronged fork pointing up. The fork is supposed to stick into the receiver mechanism which is part of the handle slide. I get it: as the user pushes and pulls on the handle while vacuuming, the handle assembly slides back and forth and transmits commands thru the mechanical linkage to the drive mechanism. My fork was not engaged in the receiver. The reason was 3 screws on the left side of the brass block assembly were loose and the small black wedge was partially crushed. I dissassembled, cleaned, oiled and replaced the pieces and cinched down the 5 machine screws holding both brass blocks and the wedge. When I did this, I noticed the fork engaged with the receiver. Now reassembled, my Kirby runs pretty good and no longer feels possessed. And yes the roller height does make a difference on the drive assist reaction.

Mar 28, 2007 | Kirby G6 Bagged Upright Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts


Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18414 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides