I am having a HP Photosmart 2613, all-in-one but I am a Vista user.The CD version 4.2.0. install is just for Windows 98,Me,2000,XP. I am looking for a Vista version.Thank you.

If you ahve teh software installed, right click the icon and select the properties option then locate the tab that has the option to run in compatibility mode. Set the software to run in Windows XP or Vista compatibility. If it is stopping the installation, right click the installation file and tell it to run in compatibility mode with a previous version of windows to install.

You can download the driver that you need by going to HP's website at http://www.hp.com. Look for software and drivers and then enter the make and model of your printer. Download the driver and install it to your computer then connect the printer and it should work.

Good luck!

If you are trying to install from the cd that came with the printer it is an older version.
To get updated drivers go to HP website. http://www.hp.com.
click on support and drivers.
1. Click Download drivers and software (and firmware)
2. Type in the printer model number click on GO.
Some printers have several versions, so it may ask for your version. click on your version.
3. From the dropdown select your Operating System click next it will then show you the drivers, updates and utilities for your Operating system.
At this point you can either download the drivers or order a cd from HP.

i used to hp c3188 printers

i formet to computers

so i need re-stold to printers but i have not drivers cd

1. Go on HP website
2. Go the Support and Drivers
3. Select Download drivers and software (and firmware)
4. Type in Photosmart C4480
5. Select Operating System "Microsoft Windows Vista"
6. Select HP Photosmart Full Feature Software and Drivers
7. Click "Download Only"
HP Photosmart Full Feature Software and Drivers
HP Photosmart Full Feature Software and Drivers

your hp photosmart 2570 printer driver is not compitable with vista drivers so its not getting loaded.as the printer is old and the vista is new.the printer will work properly with ---xp---98----and other windows operating systems.this is always a problem for the vista users as the printer does not get loaded.so you can call either hp to provide you a compitable driver cd of your printer to be loaded on vista.or you can call vista to upgrade your sytem by providing you a compitable driver cd.after that your printer will get installed and detected.

rate the solution if it helps you.
thanks.

hi bob... here is the link... to download the drive for vista.... for hp photosmart d7260

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=3315742&

• Two 240-pin DDR2 SDRAM DIMM slots.
• Single Channel DDR2 400/533.
• Supports up to 2 GB system memory.

download the latest vista compatible drivers from HP website ...

Here u go to upgrade ur drivers for VISTA:

http://www.drivershq.com/home.aspx?af=googlevistadrivers&bn=5&gclid=CM7XjOjYyY8CFR1KXgodl1XYzA