Question about Mercury P4VM800M7 Motherboard

3 Answers

No display first off all start the pc but no display what will do. please give me more detial

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 240 Answers

Check if all cables are connected.

turn on pc...observe all lights

test the monitor to other pc...

if monitor is good
check if everything inside the CPU are connected.


Posted on Mar 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 28 Answers

Fiend your solution direct from mercury. Here is your solution.....
no display - 71707e3.jpg
http://www.mercury.com/motherboard/prob676ijt65/solution

aamknr-12

Posted on Aug 29, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HVE I PCWITH MERCURY MOTHER BOARD .MY ROOM MATE REMOVE THE PROCESSOR FROM THE MOTHER BOARD AND RECONNECT IT .BT THE PROBLM NO DISPLY IN MONITOR .ANY SOLUTION FOR RESET THE MOTHER BOARD DISPLY

Posted on Apr 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intruder alarm


What sound is it? A beep? Or an annoying sound from inside the computer? Please provide more information.

Aug 01, 2013 | Motherboards

1 Answer

When I switch on my PC with on button.. pc is on fan is run and keyboard light is blink is one time but there is no display on my monitor... please help me what i do..


Hello!

1. Check the cable from PC to Monitor. Not solved? go to no...
2. Restart you computer enter to Set Up(Bios) enable onboard.(Applicable only to Not Shared Vram) Not solved? go to no...
3. If you have seperate VCard try to removed and clean, then start again.

Give me feed back what results you got..

Thanks!

Mar 16, 2011 | Intel Desktop Board D945GNT Motherboard...

2 Answers

D845GEBV2 cannot get any diplay


Hi. You should obviously check if your monitor is working properly first. Just connect it to another PC to try it. If you can hear fans going and computer starting but nothing on display try an old trick- take the power cord out from the back of PC and press power button, keep it pressed for good 30 sec then put it back in and try to start as normal. If that don't work you may find that chip responsible for display (GPU- Graphics Processing Unit) went dead which isn't a good thing. To get passed it you could buy a separate Graphics Card and place it in one of the slots in motherboard. Make sure you know which kind of card you need you would find this info on manufactures website or in your service manual. If you already have a graphics card in it and that don't give you no display try resitting it or replacing if it don't work. I hope you find this helpful. Please let me know if this was any help. Thanks and good luck.

Apr 23, 2010 | Intel D845GEBV2 Motherboard

1 Answer

Display Problem


Okay you need a display driver for you video card, you did not say what type of video card you have so its hard giving you a url that is not going to work. if the video is onboard go to the gigabyte website and download that driver you will have success with this if you get the correct driver. Thanks and please rate

Aug 19, 2009 | Gigabyte GA-8LD533 Motherboard

1 Answer

PLS HELP ME OUT U MUST HVE HVE NOT SEEN THIS PROBLEM BEFORE??


stop errors are common when you have entered a new piece of hardware to the pc the operating system also may not like the setting of your bios if you keep having problems with stop erors go to microsoft page and find the stop eror you are getting there also disconect any new harware u instaled k get back to me ill keep helpping you

Nov 03, 2007 | Intel 845GE Motherboard

2 Answers

Have no Display


1 st set all parts currectly on its place.. properly.... now try to start u r pc.. if it doesnot work. ur windw may be cuureped man ....re instollation may solve ur problem.. best regards.. & best of luck mail-add- sigma_shiva1@yahoo.co.in

Oct 08, 2007 | ASUS CUWE-RM (CUWERMSWA) Motherboard

Not finding what you are looking for?
Mercury P4VM800M7 Motherboard Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Roshan Rijal
Roshan Rijal

Level 2 Expert

361 Answers

Are you a Mercury Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...