Question about Sewing Machines
The bobbin in my machine won't spin at all. I haven't tried to oil it because I do not know where r how to do that. Is there a way I could fix that myself?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you have to make sure the bobbin thread is positioned right in the middle. When the needle comes down (into the bobbin compartment), you can peer into the bobbin compartment and see a loop of thread (coming out of the needle). You want to catch that bobbin (thread) in the loop of thread (that runs from the needle).
Posted on Feb 27, 2009
Sounds like the take-up lever is not threaded.
Remove the thread from the machine, turn the handwheel until the take-up lever is at its highest position, raise the presser foot and rethread the machine. Set the upper tension dial to 5 and retry.
Posted on Aug 18, 2009
Testimonial: "cheers machine running fine now only occaisional jam , but mostly smooth "
did you put the bobbin thread in the tensioner? that would be the cut in the side of the bobbin case to pull the thread under the tensioner. if not it will cause problems. but if the top thread is looking good then the top thread is the problem, thread the machine with the presser foot up to let the thread into the tensioner, if it looks good on the top and not the bottom it is the upper thread if it looks good on the bottom and not the top it is the lower thread
Posted on Aug 22, 2009
Tips for a great answer:
Feb 08, 2012 | Sewing Machines
Oct 20, 2011 | Sewing Machines
Oct 15, 2011 | Brother LS-2125 Mechanical Sewing Machine
Nov 01, 2010 | White Sewing W750 Mechanical Sewing...
Sep 24, 2009 | Sewing Machines
Aug 18, 2009 | Sewing Machines
Feb 15, 2009 | Sewing Machines
Sep 26, 2017 | Bernina Sewing Machines
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: