Question about XO Vision XOD1742BT Car DVD Player

Open Question

Amplifier control, Back sight off, and Brake wire

I bought the XO Vision 1742bt and have a Ford Sport Trac. Could you tell me where to connect the Amplifier power control, Back sight off, and Brake wires?

Additionally, I have three wires remaining on my factory harness (amplifier ground, dash light illumination, and dimmer ground) and do not know if these attach to the unit or not.

I am very excited to install this unit and any help would be appreciated.

Posted by on

4 Suggested Answers

  • 1 Answer

SOURCE: XO Vision XOD1740BT in dash dvd player bypass code

I solved it By connecting the pink wire to a constant ground this acts as a bypass so the unit plays anytime.

Posted on Dec 17, 2007

dj x
  • 61 Answers

SOURCE: xo vision dvd player

hi there
it shouldn't be to hard to install this but it does require cutting a hole in your interior part of roof........a install like this could take anywhere from 30 mins - 1hr for a installer to put it in. to do it yourself it could take 1-3hrs to complete (note for your first time doing this take your time and follow the install manual that will be provided)

Posted on Mar 06, 2009

  • 3 Answers

SOURCE: help me with back up camera for xo vision xod1740bt

I am just giving a suggestion. I too need to know how to wire this. From what you posted it sounds like you hooked the wire to a constant +12v that is always on. Forgive me if I am wrong. Anyway, Did you connect this wire to rear reverse light power. I think from what you say it is supposed to be connected to the positive side of that light. If this solves your problem can you PLEASE let me know the full details of everything else you hooked up on the circuit to make the backup work. For instance what is the label of the orange wire. TIA.

Posted on Apr 06, 2009

  • 1 Answer

SOURCE: replacement screen for xo vision 1742 deck

Model LCD 7'' :Innolux AT070TN07 + Touch panel (unknow)

Posted on Apr 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake lights on a 2003 ford sport trac will not work the cab brake light works


do you have a towbar check the wiring on that and make sure that they are completing the circuit

Mar 01, 2015 | 2003 Ford Explorer Sport Trac

1 Answer

2001 ford sports trac brake lights not working ,


This may be a simple fix, where the wheel jack or washer bottle is located in the back behind the panel, there should be connectors for the rear lights, it is possible that the plug has been dislodged, remove the panels and check the plug connections. Good luck.

Nov 19, 2009 | 2001 Ford Explorer Sport Trac

3 Answers

Help me with back up camera for xo vision xod1740bt


I am just giving a suggestion. I too need to know how to wire this. From what you posted it sounds like you hooked the wire to a constant +12v that is always on. Forgive me if I am wrong. Anyway, Did you connect this wire to rear reverse light power. I think from what you say it is supposed to be connected to the positive side of that light. If this solves your problem can you PLEASE let me know the full details of everything else you hooked up on the circuit to make the backup work. For instance what is the label of the orange wire. TIA.

Jan 13, 2009 | XO Vision XOD1735 Car DVD Player

1 Answer

2001 ford explorer sport trac


Just found the answer on another site. Sure enough went out removed the 3 philips head screws in the steering column opened it up and walla a wire connection had pulled itself free. When my son uses my truck he always uses the tilt steering, when I get in I have to readjust it. because of this the wire connection pulled itself out. I simply pushed it back in an blinker and brake light are now working. My husband is now trying to figure a way to secure the wire connection so it doesn't pull itself out again. Hope this helps others, either by saving the cost of a dealership or machanic or from getting rear ended.

Aug 02, 2008 | 2001 Ford Explorer Sport Trac

2 Answers

Cant play dvd get warning msg please stop watch video play


yeah like everybody says CONNECT THAT Brake wire(could be any color depends on your Head Unit) with the BLACK WIRE...it works!!!!!!!

Jan 26, 2008 | XO Vision XO-1400 Car DVD Player

5 Answers

E- brake bypass


Thanks for everyone's help. The bcar screen actually is the backup camera screen which is activated by the orange wire and when I turned on the lights, it got activated. I disconnected the orange wire and everything is fine. When I get a backup camera I'll connect that wire to the backup lights so that it will come on whenever I put the car in reverse. You are right that their manual is not very clear at all. I called their tech support and they couldn't help me trouble shoot the problem either. The unit is functioning perfect now but my next beef is that you can't change the XO vison default screen when a cd is playing. It would have been nice if you can scroll some jpeg shots of anything else besides looking at the xovision logo. I guess I can't have it all for $340 so, I'll stop whinning.

Jan 26, 2008 | XO Vision XO-1400 Car DVD Player

4 Answers

XO Vision XOD1740BT


ground the brake . all u need to do.

Dec 26, 2007 | XO Vision XO-1400 Car DVD Player

Not finding what you are looking for?
XO Vision XOD1742BT Car DVD Player Logo

Related Topics:

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top XO Vision Car Audio & Video Experts

yadayada
yadayada

Level 3 Expert

71043 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

mega_mind

Level 2 Expert

162 Answers

Are you a XO Vision Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...