Question about Yamaha CRW 8424 Burner

1 Answer

YAMAHA CRW8424 gives Track following error..

Hi, I have CRW8424 internal burner. When I try to write any CD it gives me "Track Following Error" and my CD goes waste. Can u please let me know what could be the problem with my burner...below is the error log produced by Nero after error, ------------------- Log Starts -------------------------- AK K 1A23-2045-8001-7268-4102-1210 Windows 2000 5.0 IA32 WinAspi: - ahead WinASPI: File 'D:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM Nero version: 6.0.0.11 (Nero Express) Recorder: Version: 1.0j - HA 1 TA 0 - 6.0.0.11 Adapter driver: HA 1 Drive buffer : 4096kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: Version: 3.0A - HA 1 TA 1 - 6.0.0.11 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : ST310212A atapi Port 0 ID 0 DMA: On DiskPeripheral : ST320423A atapi Port 0 ID 1 DMA: On CdRomPeripheral : YAMAHA CRW8424E atapi Port 1 ID 0 DMA: Off CdRomPeripheral : TEAC CD-540E atapi Port 1 ID 1 DMA: Off ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 209MB (214344kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.8.2007 CD Image 1:10:39 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 1:10:39 PM #2 Text 0 File Writer.cpp, Line 127 Writer YAMAHA CRW8424E running 1:10:39 PM #3 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using CD-R/RW media 1:10:40 PM #4 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 359848 (79:59.73) Last address to be written: 208155 (46:17.30) 1:10:40 PM #5 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 1:10:40 PM #6 Text 0 File DlgWaitCD.cpp, Line 1722 Recorder: YAMAHA CRW8424E; CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 0F 25 (LI 97:15.37), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 1:10:40 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 768 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 208156 (208156) = #208156/46:15.31 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 208156 blocks [YAMAHA CRW8424E ] -------------------------------------------------------------- 1:10:40 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 937 Prepare recorder [YAMAHA CRW8424E ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 426610688, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 208156 | lead-out | 1 | 0x00 | 0x41 1:10:40 PM #9 Phase 24 File dlgbrnst.cpp, Line 1843 Caching of files started 1:10:40 PM #10 Phase 25 File dlgbrnst.cpp, Line 1843 Caching of files completed 1:10:40 PM #11 Phase 36 File dlgbrnst.cpp, Line 1843 Burn process started at 4x (600 KB/s) 1:10:40 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2130 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:10:40 PM #13 Text 0 File Mmc.cpp, Line 14422 StartDAO : CD-Text - Off 1:10:40 PM #14 Text 0 File Mmc.cpp, Line 14720 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 2e 11 1f 1:11:06 PM #15 SCSI -1119 File Cdrdrv.cpp, Line 1415 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04240000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x82 0xEC 0x99 0xED 0x0A 0x00 0x00 0x00 0x00 0x09 0x00 1:11:06 PM #16 CDR -1119 File Writer.cpp, Line 335 Track following error 1:11:07 PM #17 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 1:11:07 PM #18 Text 0 File ThreadedTransfer.cpp, Line 221 conversion idle, stopping reader 1:11:07 PM #19 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 1:11:07 PM #20 Phase 38 File dlgbrnst.cpp, Line 1843 Burn process failed at 4x (600 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=8.0.0.212 , size=2432 bytes, created 10/5/2006 8:12:44 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/5/2006 8:12:44 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 4/23/2007 5:45:26 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/18/2003 12:00:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) --------------------Log Ends here -------------------------- Thanks in advance. Regards Amod

Posted by on

  • Amod Kavathekar Aug 06, 2007

    Hi Biba,

    Thnks a ton. My problem got resolved based on your suggestions.
    I replaced my SMPS for testing purpose with new one which has higher Power output.
    After that I burned 15 CDs with different brands including CDWRs and neither of them failed.

    Thanks a TON!!!! I saved a lot of bucks on new drive price.

    Warm Regards
    Amod

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

PROBLEM DEFINITION: Basically, it is a hardware error that occurs when a drive is not capable of following a data track on a CD-R or CDRW or on the other hand, poor power flow may cause the problem SOLUTION: 1. Try use another disc, a disc with a different band. 2. If one doesn't work, you may have to open your system and use a different power connector, making sure no other devices are using the power connector in the same strand. 3. Lastly, if neither the above doesn't work, you may have to send your drive in for servicing as the head may be dirty or misaligned.

Posted on Aug 06, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have nt4.0 when i connect my yamaha crw8424..the system recognize de number.. but no sync. then i cant see anything


click start control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you will see options to update driver,roll back driver,or
select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
make sure that the cd-dvd burner is getting enough power test all leads that are attached to the dvd drive including electrical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or

if this does not fix the problem it might be a registry problem
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer
Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.
hope this helps

Mar 20, 2011 | Yamaha CRW 8424 CD-RW Burner

3 Answers

When attempting to back up a file to cd error


make sure your disc is a rewritable CDRW or DVRW

Jun 27, 2009 | NEC ND-6500A DVD±RW Dual Layer Burner

1 Answer

I have a Hp Pavilion dv6000 and iam having problem with the dvd writer, while burning files with nero 7 its stopping and giving an error message . Please help me resolve the issue


hi friend, you should buy a DVD lance cleaner DVD. which is avilable in your electronic market. use it.bcoz, your dvd lance have dust on it.

if, it again give you same error then, goto your nearest service center.



Regards: Rakesh

Jan 26, 2011 | HP DVD1040i 20x Super Multiformat Dvd...

1 Answer

I have always been using Nero burn software with my LG GSA-2166D DVD RW. Now I bought Nero Multimedia Suite 10. No any writing process has been successful. I have since yesterday spoiled 10 DVD's....


speed of source data is too slow = the hard disk cannot deliver the data fast enough and the burning process stops; this is a sign of a severely fragmented file system and very charged background processes: defragment your hard disk, stop using other programs when burning a disk and use 8X as a recording speed.
 Track Following Error = the laser head in the burner is no longer capable of following the track it has itself burned - the lens is dirty, clean it.

Jun 12, 2010 | LG GSA-2166D DVD RW Dual Layer Burner

1 Answer

I've been all over the web lately looking to solve a burning issue I've been having. My computer was purchased around the beginning of 04. It's a HP windows Media Centre, xp, sp3. It's actually running...


hi frnd.. just update the firm ware of the drive by visiting the vendors or manufacturers website... after this try installing other Burners like NERO or BURNCD... if this also doesnt help go for a new drive.. take care..

Sep 21, 2009 | Computers & Internet

1 Answer

LG HL-DT-ST DVDRAM GSA-T10N error code 10


To solve this Code 10 error, follow these instructions: NOTE: After removing these registry keys and rebooting, it may be necessary to reinstall any CD or DVD recording applications.
1) Close all open programs

2) Click on Start, Run, and type REGEDIT and press Enter

3) Click on the plus signs (+) next to the following folders
  • HKEY_LOCAL_MACHINE
  • SYSTEM
  • CurrentControlSet
  • Control
  • Class
  • {4D36E965-E325-11CE-BFC1-08002BE10318}
4)This folder is the DVD/CD-ROM Drive Class Description in the registry.Look for any of the following names in the right hand column.
  • UpperFilters
  • LowerFilters
  • UpperFilters.bak
  • LowerFilters.bak
5) If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

6) After deleting the keys, close the
Registry Editor

7) Reboot your computer


8) Open My Computer and check to see if your CD or DVD drives havereturned. You may also want to open Device Manager and verify that theyellow exclamation and error code on the CD or DVD drive is gone.

Apr 03, 2009 | LG (DAD-8020B) DVD-RAM Burner

1 Answer

Drive is not accessible. I/O Device Error


Method 1: Change the transfer mode for your CD drive in IDE Channel Properties
1. Click Start, right-click My Computer, and then click Manage.
2. Under Computer Management (Local), click Device Manager.
3. On the right side, expand IDE ATA/ATAPI controllers.
4. Right-click the channel where your CD drive is connected, and then click Properties. Typically, this channel is Secondary IDE Channel.
5. On the Advanced Settings tab, in the Transfer Mode box for the device that represents your CD drive, click PIO Only. Typically, this device is Device 0. Then, click OK.

If the issue is not resolved after you change the transfer mode for the secondary IDE channel device 0, your CD drive may not be located there. Use the same procedure to change the transfer mode back to DMA if available. Then, repeat these steps to change the transfer mode for IDE devices in the following order until the issue is resolved:
• Primary IDE channel, device 1
• Secondary IDE channel, device 1
Note Primary IDE channel, device 0 is connected to your boot disk. This is the hard disk that typically contains your operating system.

OR

Make sure that all cables are connected correctly
If you have another cable, try to use it. For USB devices, try to use another USB port. If it is internal dirve is there then Reseat it that means remove it and reinstal that
Then Set the BIOS as Default for that restart the system and before windows screen it gives the instructions how to boot in setup once you are in setup, on the bottom it says press F9 or F10 to set as default; different BIOS have different options so do the as the on screen instructons says.

OR

Try to access the media or device on another computer; try it on your friend or family computer
if it is not working contact your H/W Vendor

Aug 14, 2008 | Toshiba SD R2312 CD-RW/DVD-ROM (Combo)...

1 Answer

Internal Error


What version of windows and nero are you using?

Oct 11, 2007 | LG GGCTower 1-to-7 (CO07DVD7TO1TB-0000)...

1 Answer

Freecom Classic DVD±RW 8432 Burner


Hi ,
Make sure you still have the software stored on your machine or on cd .
Please delete software and go to this site : http://kb.roxio.com/search.aspx?URL=/content/kb/Toast/ET6000082&PARAMS=set-locale=en
Follow instructions to reinstall software .
If same issue remains , try to remember what changes you eventually made to your machine just before problem happened and delete the changes to see what happens .
You can also try to restore your system to an earlier date , provided this is possible with Apple .
Hope this helps .
Thank you for visiting FixYa .

Jan 11, 2007 | Freecom Classic (22095) (22095)...

1 Answer

CD dirve and DVR burner not working!!!


try a fresh install of windows, if this is the only cd/dvd drive and it's replacing the previous one look at the power requirement on the drives chances are they're gonna be the same but they might not be, so there is a chance that it's not the power supply, also check the jumper settings on the drive and make sure its set properly, do not use cable select, improper jumper settings and cable select can cause loss of functionallity in a device especially if its an ide/eide device, sometimes it will even cause the computer to not post or too post extremely slowly.

Dec 10, 2006 | Mad Dog Multimedia (MD16XDVD9) DVD±RW...

Not finding what you are looking for?
Yamaha CRW 8424 Burner Logo

3,910 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Computers & Internet Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

xalint1
xalint1

Level 2 Expert

152 Answers

Are you a Yamaha Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...