- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Nokia E71 Housing Fascia Replacement Faceplate Cover, Restore your ... or alternatively use the corresponding tools to change it by yourself.) Package include: Full Housing Replacement Cover for Nokia E71
Full Housing Replacement Cover for Nokia E71 (Grey) * 1 Front Cover Back Cover Middle Cover Keypads Accessories as the picture shows Keypad *1 T6 Screwdriver and an opening tool
This might help, also do a search on YouTube for Nokia 7373. LCD change on 7373
Switch off the phone.
Take SIM card out.
Take front faceplate off by inserting Credit card/Tweezers between housing and silver key. As you pull up, take credit card and slide it on the side of the phone prying the clips off. (Gently tease it out working around the phone)
Unscrew these 6 screws at the edges with the T6 screwdriver and release the 4 clips surrounding the LCD screen. Slip the little black frame off of the LCD screen, and lift the screen. (Prize it up gently from the swivel end of the mob.) There's a printed circuit board underneath it is attached to the LCD by a hook type catch. Don't damage it (the board). You should now see a screw. Removing this screw removes the back cover.
That’s it! Put your new faceplate or housing in and figure out how to put things back by following the directions here in reverse order.
You should use anti static gloves for this job, avoid touching the connections and the LCD face.
hi you best bet is go to a repair mobile shop if are in doubt to try this .
you'll need a small Philips head screwdriver to complete the
installation. To take off original faceplate, remove 2 screws located
below the inside display (screws are hidden under stickers). Next,
gently pry off the faceplate along the edges between faceplate and
phone with a Faceplate Removal Pry Tool. When re-attaching screws, do
not over-tighten screws riz.