I cannot print already since yesterday? WHat happened? This my default printer and why is it that I still cannot print? What's wrong? Thanks
Posted on Aug 11, 2014
On epson LX-310 font draft condensed is not available, so if you want it, you must downgrade your printer. i don't know, why epson doesn't do this :(
if you want send raw data to printer, use escape command
Posted on Jan 25, 2014
Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!
Posted on Jan 02, 2017
SOURCE: how to change epson lx 300 font size
Unfortunatelly you can not change the fontsize of the printer, but you can change the font.
To do this hold Pause button for 3 seconds, then push Font button. Two lights will light on and then off and will show you the current settings of the font. To change the font just click repeatedly the font button untill you reach the desired font following the combinations of light on the table below.
The fontsize is controled by the software you use.
Good luck!
Posted on Oct 08, 2011
SOURCE: Changing font on Epson LX-300+
Just switch off your power switch and turn it on again and then press the paper out button for 3 seconds when you hear 1 beep that is the time you can change font using the font button switch and choose the font that want by pressing it.
Posted on Oct 06, 2008
SOURCE: Epson LX-300+ Matrix Printer Problem
Please change the setting print direction from bidirection to unidirection.
Posted on Dec 03, 2007
SOURCE: Epson LX-300+II, the font problem
yes you can change the font tray to print the printer internal setting tray that press and hold any key by tarn the printer off then on after you tarn the printer on release the key
Posted on Sep 06, 2008
SOURCE: Epson LX-300+II, the font problem
have you check the white cable? (from the printer head to the
mainboard) .If the white cable is ok and you confirm that the
printer head is fine, then the problem is at the mainboard.
most problems like this that i had encountered is at the transistor
at the mainboard. Try to check it out using a multitester.
Posted on Sep 08, 2008
Sep 26, 2014 | Office Equipment & Supplies
May 08, 2014 | Epson LX-300 Matrix Printer
Dec 10, 2013 | Epson LX-300 Matrix Printer
Oct 06, 2011 | Epson LX-300 Matrix Printer
Sep 08, 2009 | Epson LX-300 Matrix Printer
Feb 04, 2009 | Epson LX-300+ II Matrix Printer
Sep 15, 2008 | Epson LX-300 Matrix Printer
Sep 06, 2008 | Epson LX-300+ II Matrix Printer
Sep 06, 2008 | Epson LX-300+ II Matrix Printer
Mar 16, 2008 | Epson LX-300 Matrix Printer
4,782 people viewed this question
Usually answered in minutes!
×