Question about Televison & Video

Open Question

Can't operate Bauhn 1TB HDD PVR (dual HD tuners) with new AWA HD LED LCD TV

I have a Bauhn 1TB HDD PVR with dual HD tuners (model # APVR-1000MI), which I previously used with a CRT T.V. (No problems). I recently purchased a new AWA 22" FULL HD LED LCD Television (model # MHDV2262-04), and have connected the two with: HDMI Cable TV - PVR Aerial - PVR The PVR appears to be operating as I can see the channels change and functions change on its display panel...(hasn't been rescanned recently and still has old channels and old recorded programs stored too). The TV is operating fine, but will not allow me to use the PVR...I cannot access the PVR menu, or any of its functions. Its as if they are working independent of each other. How do I get my TV to allow my PVR to work through it? The TV manual talks about having to "Format external USB devices", but this is NOT a USB device...? (If I format it I lose all stored data) The TV manual states (pg. 19, section 9) PVR Function - from OPTION MENU - enter into the PVR File System and choose "check PVR File System", click "OK", and wait until "checking" changes into "Success"... When I did this it said "FAIL"...but again, I believe they are talking about a USB Devices not a PVR. Can anyone assist at all as I do not believe this to be a warranty issue but an operation/compatability problem where my tv won't allow my PVR to work. How do I rescan my PVR when I can't see it operating on screen? I am seriously not a tech-head please! Thanks in advance.

Posted by on

  • Donna Apr 24, 2013

    Ok, not sure what I did but the PVR is now functioning correctly through the tv! Sorry I cant give precise was a button on the PVR remote is all I recall. Thanks for a great website.



4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: intermittent loss of audio single

Go into your Audio section of the Menu and make sure that SAP is turned OFF. Let me know how you did.

Posted on Apr 21, 2009

  • 3 Answers

SOURCE: LG 42 LCD TV HDD initialization in progress message

Change the hdd or remove it then connect it to PC and do for it format , it will work .

Posted on Nov 14, 2010

  • 75178 Answers

SOURCE: magnavox LCD tv external speaker

The jack you describes here "Digital Ouput Device To" means, you can connect these jacks to the output of a digital device, such as DVD or so. It is meant for to get signal into the TV, not ot out.
HDMI [High Definition Multimedia Interface] is a type of connection, which the TV an be connected to any HDMI device from outside. Both the above said are, signal in to TV connections. Not out.
If you want to connect this TV to any amp or any other external audio devices; look for any audio out option is there.

Posted on Feb 05, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Remote code for Bauhn ATV-BA32DV2

bauhn p v r setup Questions & Answers - Fixya > Forum > Tags
... bauhn universal remote control tv but i had vivo tv how ican set up that The universal ... ATV-BA32DV2, have done initial setup, but screen says have to scan ...

Remote code for BAUHN TV model ATV-19HED - TVs - Home theatre ... > Home theatre > TVs

WhirlpoolDec 14, 2014 - I've mislaid the remote for this TV and I was wondering if anybody new how I could get hold of BAUHN remote IR codes. I've looked everywhere ... 32" (81CM) HD LED LCD TV $222
May 29, 2014
Bauhn 24" Full HD LED LCD TV with DVD
Jan 12, 2013
More results from

[PDF]32" (81cm) HD LED LCD TV

Feb 03, 2016 | Televison & Video

1 Answer

Where can I get a firmware upgrade for Bauhn pvr model: apvr-1000mi

You will only find them on the makers website under 'Support'. Be very careful with firmware upgrades as they can render the device unusable if it goes wrong. You should only upgrade if you need to for a reason like connecting something that is new and unrecognised by the older technology.

Nov 30, 2015 | Televison & Video

1 Answer

Where do I find the Firmware update for the TV-6600 BAUHN UNIT- 500GB HD TWIN TUNER PVR

it should be available from the support section of the manufacturer's website. If it cannot be found there you should google/bing the make and model, that may bring results

Jun 01, 2015 | Televison & Video

1 Answer

Do you know where I can find the firmware update (1.18) for a Bauhn 1Tb PVR?

down load and put on a usb drive,
DGTEC firmware 2011 updates available
New updates available for service issues such as freezing and start up/ recording issues (firmware 2011) are also available from the DGTEC website.

Please update software first before replacing hardware...

From DGTEC Website Software Upgrades page: -

Click on the relevant link below to download the latest software update for your DGTEC product. For further help and assistance, please access the DGTEC Call Centre via the Support page.

Obsolete Products

* DG-FV500PVR Upgrade (zip file 4.3Mb)

* DG-HD6760 Upgrade (rar file 2.3Mb) Upgrade instructions DG-HD6760 (25Kb)

New Products









Note: - Master Override Password 1973


Read instructions carefully before commencing. Software needs to be carried out while the PVR is cold. Go to "Telefix" website and select "Service Guide" or "Download Service Manuals" and download software to a location on the PC Hard Drive.
Unzip file and copy "usb.upg" software onto a blank USB Memory Stick.
Plug USB Stick to USB port of PVR

Connect Power to PVR and switch on so that that the booting process commences.
Press 'Menu' button and scroll left or right by using the arrow buttons to find 'Installation' then press OK to select.
Note: PVR may freeze and not allow selection. Several attempts will be required to enable selection. If problem persists, switch OFF PVR to allow it to cool down then try again or use the alternative method.

Alternative Method

1a. Disconnect mains power.

2a. Plug USB Memory Stick to USB port.

3a. Press and hold the CH down arrow button on the unit and then connect mains power.

4a. When the display starts counting down release channel button and the upgrade interface will appear on screen.

7. Scroll down to 'USB Menu' by using the arrow down button then press 'OK' to select.

8. Scroll down to 'USB Upgrade' by using the arrow down button then press 'OK' to commence software update.

ยท Note: - Please do not shutdown PVR or remove USB Stick during the update process. When the update is complete the PVR will power down and reboot again as normal.

Once the update has completed, reset the PVR by restoring back to Factory Default.
Press Menu ? Installation ? Factory Default ? enter password 0 0 0 0 ? Select 'Yes' ? press OK to rescan channels.

Check Software Version, Press Menu ? Installation ? Version Info ? OK
download and put on usb drive

Software Updates

Apr 11, 2015 | Televison & Video

1 Answer

How do I upgrade the firm Bauhn APVR-9650T on pvr I have put a teac HDR9650TS firmware upgrade on it and now it wont work. need to take it back to bauhn o/e firmware or the fireware for the 2014 model....

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
Search the site by type in the brand name to your device, in the "Search this Blog" window, and press Enter.

Nov 24, 2014 | Televison & Video

1 Answer

I have a Bauhn Ultima APVR-1000MI. Could you tell me how to move recorded shows from the internal drive to folder on the 1 tb external / usb drive?

open 2 windows one showing the shows on drive one and one in the folder you want to move it to ( make the windows small so that you can see both windows) put the mouse pointer on the show you want to move right click on the mouse chose copy or move. put the mouse pointer on the drive you want to move it to right click the mouse chose paste and wait will it copies or moves to new drive

Note move will delete it from the 1st drive and put it on the 2nd drive
with copy option you will have a copy on both drives

Sep 28, 2014 | Computers & Internet

1 Answer

AWA HD LED LCD TV with builtin DVD Manual

Hi Beverly House

You can use this manual for your LCD TV

I hope my solution may help you.
Thanks for using Fixya...;-)

May 06, 2014 | Televison & Video

1 Answer

Where do I find the Firmware update for the TV-6600 BAUHN UNIT- 500GB HD TWIN TUNER PVR

I need the Firmware update for the TV-6600 BAUHN UNIT- 500GB HD TWIN TUNER PVR as well. Can anyone out there be of any help?

Apr 26, 2014 | Computers & Internet

1 Answer

Hd recording

If the digital tuner can pick up the HD channels, then I don't see why it can't record them. However some TV channels have blocking on them to prevent recording. If it can't record a channel it will say so with a message, generally.

Jan 22, 2014 | Magnavox MDR537H/F7 DVD Recorder 1TB Hard...

1 Answer

Bought a new awa 32"

is it designed for your countries standards?

Mar 09, 2011 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5346 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides