Question about LG 42PC3DV 42 in. Plasma EDTV

1 Answer

Picture too big!!!

My picture is too big...all the time. No matter what setting it is on it's till too big. This has happened all of a sudden. 42 in LG plasma. As an example, peoples heads are chopped off. News channels with info lines on the bottom of screen cannot be seen. I'm at my wits end. Nothing in the manual addresses this problem. in menu options the "horizonal" option cannot be highlighted. Any suggestions/remedies??? Thanks in advance rkelly1371@comcast.net

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 192 Answers

Normallly, if the picture size button on the remote for the television does not achieve the desired affect, then, a cable box or a satelite box is where the change needs to be made. For example: A Motorola Cable box needs to be set up to go to a wide screen or zoom when an analog signal is detected. Some Dish Network boxes have Size buttons on their remotes and also in their main menu. It's difficult to determine the repair without knowing the types of the peripherals. Hope this helps.

Posted on Aug 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My LG 42Px5D Plasma; when I turn it on, it is blinking for a couple of minutes, then it is normal again. It started happening only a couple of months ago. What's wrong? Thanks


THERE WILL BE A CAPACITOR GONE FAULTY IN THE POWER SUPPLY,,

IF U OPEN UP THE BACK LOOK ON THE TOP OF THE CYLINDER TYPE CAPACITORS THAT STAND UP THE ALLOY ON TOP SHOULD BE FLAT ON THEM ALL ... IF ONE IS BULGING AND TOP HAS BURST OR READY 2 BUST THEN REPLACE WITH A SOLDER IRON,, THIS WILL FIX THE SLOW START UP AS THE CAPS NEEDING TO GET WARM TO FIRE UP THE PSU,,

Feb 21, 2010 | LG 42PX5D 42 in. Plasma HDTV

1 Answer

LG plasma not picking up picture or sound


hi yes your box has gone the same happend to me

Jul 11, 2009 | LG MZ-42PZ14 42 in. Plasma Television

1 Answer

Sound but no picture


Your mainboard is giving you trouble, go ahead and replace it.

May 28, 2009 | LG 42PX3RV 42 in. EDTV-Ready Plasma...

1 Answer

LG 42PC3D plasma television -- screen split down the middle


Our 42" LG picture is also split down the middle. It doesn't matter if it is cable or a DVD. I would love to know if anyone has found out the solution to this prob. The TV is only 3 years old...

Jun 19, 2008 | LG 42PC3D 42 in. Plasma Television

1 Answer

Lost half of picture


This can be on the matrix drive board, or the display assembly itself. It is possible to also have a defect in the address decoding area that will cause this.

The procedure is to swap out the suspect boards to determine where the fault is, leave the working boards in the set, and then follow up any necessary calibrations that are necessary.

Jerry G.



May 24, 2008 | LG DU-42PX12XC 42 in. Plasma HDTV

1 Answer

42 plasma tv no picture but have sound


Try pluging in the euro connecters in tight on the back of the set or in some cases HDMI cables

Jan 30, 2008 | LG 42LC2D 42 in. LCD HDTV

6 Answers

LG PLASMA TV WITH COLOURED LINES OVER SCREEN


If the Video (Picture/Pix) is gone but you can hear the Audio (sound), then it could mean the YSUS PCB Assembly is gone/kaput/finish. Can replace the PCB, not repair the PCB due to timing circuitry involve. Cost maybe roughly $500 depending where you located. The PCB is located on the left hand side of your TV when you are facing the back (Back open). Might find 3-4 brown flex membrane connecting to the plasma panel. The PCB has a silver or black aluminum heatsink (big) on it.
Good Luck.

Dec 22, 2007 | LG 42PX5D 42 in. Plasma HDTV

Not finding what you are looking for?
LG 42PC3DV 42 in. Plasma EDTV Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75169 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...