Question about Office Equipment & Supplies

Open Question

Cs southerntelecom com

Case # CTABMOH49621 - Attempting to install firmware ans receive the following message: drvinstaller_X64: InstallRootEnumeratedDriver - OK button; then drvinstaller_X64: add device fail! - OK button. Q: How do I install the correct driver? 314-566-0324

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: HP LaserJet 2600n Driver Installatoin

Delete from the registry and local drive every existance of all printers and then rebooting and resinstalling the printers from scratch

Posted on Nov 20, 2007

Beni S-P
  • 1006 Answers

SOURCE: Problem with Epson CX5000 Scanner Driver

Download in google for free registry repair for VISTA and repair ur registry and try to install again...

Still not working,Try to install driver's on another location


And rate me as FIXYA please

Posted on Dec 22, 2007

  • 14 Answers

SOURCE: Ink System failure error message

Refer to NateOcean's solution at http://www.fixya.com/support/t297123-ink_system_failure. My Photosmart 3310 also had the loose plastic gear problem at the ink pump. Seems that all the HP inkjet printers use the same mechanical system and that gear can just slip off over time. My printer was two years old. NOTE: You have to remove the black and white gear with belt to replace the white gear that slips off. Remove the belt first by slackening the tensioner pulleys. Then there is a very small white clip against the axel that prevents the large gear from being pulled off - lift the white tab carefully with something sharp and the gear should slip off easily. The culprit gear then just pushes onto the hex shaft.
This operation should be possible by just opening up the left hand side of the printer.

Posted on May 01, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: Driver issues...

It is now avail

Posted on May 25, 2008

  • 3940 Answers

SOURCE: When attempting to install Print

If you are using Windows XP install

windows installer 3.1

http://www.microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&DisplayLang=en

XML Services 6.0

http://www.microsoft.com/downloads/details.aspx?familyid=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en

and .NET framework 3.5

http://www.microsoft.com/downloads/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en

Posted on Jul 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to install a Singer SES1000 Installation Software on a laptop running Windows7 but am receiving the following error message: Can not run an x86 build of this utility on x64 platform


Cannot run a x86 build of this utility on a x64 platform.
it means your laptop is running x64 bit driver so you would have to find out if can download a x86 driver for your setup.
goto google search and put in . windows driver download x86 for windows 7 and see if it will let you do it.

Dec 03, 2016 | Computers & Internet

Tip

Syncing Books to your Slick Er700-2 E reader


Hello, Everyone. Some of you might run into a few problems when trying to sync books to your Er700-2 E reader. this is the best way to get things rolling.

1. Borders is no longer in business and neither is the desktop app that comes with the Er700. Download the new desktop app here: http://www.kobobooks.com/desktops

2. If you had a Borders account, follow the steps to migrate your old account into Kob's new library.

3. You will also need to download Adobe Digital Editions from Adobe.com
here is the link to downlaod a copy http://www.adobe.com/products/digitaleditions/?promoid=GYTAX

You can now purchase books to add into your online library. But don't sync
the player with Kobo. use your new copy of adobe digital editions to add your ebooks into your Er700-2. Connect your Er700-2 to your PC. in ADE, you'll see an e reader icon. click and drag the ebooks from your ADE library into the E reader icon to sync your device.

safely eject the device and happy reading!!!!

Oh yeah, if by an chance that you get error messages, or your e reader crashes, there's a firmware update on the company's website. I advise you to backup your e reader before you continue because it'll erase it. you can always restore your e reader after the firmware update.

here's the link for the firmware update: http://www.southerntelecom.com/slicksupport_er700firmware138.html

on Nov 09, 2011 | Tablets & eReaders

1 Answer

How to ulock poloraid tablet model pmid705


To remove the password on your device, you need to perform a firmware update on your tablet. just visit the below link, then select your device model number and follow the steps for performing a firmware update.http://southerntelecom.com/polaroidsupport/updates.html

Sep 29, 2014 | Cell Phones

1 Answer

How to solve service error 49.00 in hp laserjet 2430dtn printer


49.XXXXX ERROR
A critical firmware error has occurred.

1. Press Cancel Job to clear the print job from the printer memory.
2. Turn the printer off, and then turn the printer on again.
3. Go to http: www.hp.com/support/lj2410, www.hp.com/support/lj2420, or
www.hp.com/support/lj2430. Click Download Drivers and Software. Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the
one installed on the printer and the printer can receive a firmware update,
download the newer firmware upgrade. Not all printer models can
receive firmware upgrades.
4. Try printing a job from a different software program. If the job prints, go
back to the first program and try printing a different file. If the message
appears only with a certain software program or print job, contact the
software vendor for assistance.

1. After performing the actions listed in the preceding item, if the message
persists when using different software programs and attempting specific print
jobs, disconnect all cables that connect the printer to the network or a
computer.
2. Turn the printer off.
3. Remove all memory DIMMs and thirdparty solutions from the printer.
4. Remove all of the EIO devices from the printer.
5. Turn the printer on.
6. If the error message disappears, reinstall each DIMM, Compact Flash card, and EIO device one at a time, making sure to turn the printer off and then on again (booting to the Ready
prompt) as you install each device. To replace a DIMM, see Appendix D - Printer memory and expansion in the LaserJet 2400 Series User Guide.
7. Replace the DIMM or EIO device that caused the error message.
8. Remember to reconnect all of the cables that connect the printer to the
network or computer.
9. If the error message persists, reinstall the firmware with the latest possible firmware upgrade. Go to http:www.hp.com/support/lj2410, www.hp.com/support/lj2420, or www.hp.com/support/lj2430. Click Download Drivers and Software.
Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the one installed on the printer and the printer can receive a firmware update,
download the newer firmware upgrade. Not all printer models can receive firmware upgrades.
10. Replace the formatter

Feb 28, 2011 | HP LaserJet 2430dtn Printer

1 Answer

Attempted to install software for singer futura ce150 on a new laptop running windows 7. I received the following error message: cannot run an x86 build of this utility on x64 platform Initializing...


The driver that ships with the sewing machine was designed for an older type of computer and will not work on a new laptop.

Try downloading the updated driver from the Futura support site and installing that instead.

http://www.futura-support.com/downloads/ce150.html

Feb 26, 2011 | Singer CE150 Futura SewingandEmbroidery...

3 Answers

VU600EN.exe canon rebel XT driver install problem


The drivers are located on the Canon website:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=11154

Use the drop down box labeled "Select OS" and select Windows Vista (x64).

Mar 11, 2009 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Xerox 4150 prints from Macs but not from XP


Have you updated the machine firmware? At Xerox.com the machine firmware is there to download and install. Currently the firmeware is at level 10.100.45.018. Even if your machine is new you may have an older version of firmware.
That machine has had tons of firmware updates to it and uploading the machine to the newest level probably will resolve your problem.
There are some versions that fix 300 known problems at an update.
You have to follow the directions carefully, updating it can wipe out your LDAP settings if you use scan to E-mail etc.
If you have a maintenance agreement, or the machine is less than a year old, ( there is a one year on site warrantee on that machine for on site service) call 1-800-821-2797 and request a service call to update your firmware.
Those updates are really critical for that machine to operate properly.

Feb 11, 2009 | Xerox WorkCentre 4150 All-In-One Laser...

1 Answer

49.2F80 Service error


A critical firmware error has
occurred.
Try following these steps -
1. Press CANCEL JOB to clear the
print job from the printer
memory.
2. Turn the printer off, and then
turn the printer on again.
3. Go to http: www.hp.com/
support/lj2420.
Click Download Drivers and
Software
. Check for the
latest firmware image version
at the bottom of the page. If
this firmware image is newer
than the one installed on the
printer and the printer can
receive a firmware update,
download the newer firmware
upgrade. Not all printer
models can receive firmware
upgrades.
4. Try printing a job from a
different software program. If
the job prints, go back to the
first program and try printing a
different file. If the message
appears only with a certain
software program or print job,
contact the software vendor
for assistance.
1. After performing the actions
listed in the preceding item, if
the message persists when
using different software
programs and attempting
specific print jobs, disconnect
all cables that connect the
printer to the network or a
computer.
2. Turn the printer off.
3. Remove all memory DIMMs
or third-party DIMMs from the
printer. (Do not remove the
firmware DIMM in slot J1.)
4. Remove all of the
EIO devices from the printer.
5. Turn the printer on.
6. If the error message
disappears, reinstall
each DIMM and EIO device
individually, making sure to
turn the printer off and then
on again as you install each
device. To replace a DIMM,
see.
7. Replace the DIMM or
EIO device that caused the
error message.
8. Remember to reconnect all of
the cables that connect the
printer to the network or
computer.
9. If this error message persists,
replace the firmware DIMM.
10. Replace the formatter

Jul 18, 2008 | HP LaserJet 2420dn Printer

1 Answer

49.FF05 SERVICE ERROR


A critical firmware error has
occurred.
Try following these steps -
1. Press CANCEL JOB to clear the
print job from the printer
memory.
2. Turn the printer off, and then
turn the printer on again.
3. Go to http: www.hp.com/
support/lj2410, www.hp.com/
support/lj2420, or
www.hp.com/support/lj2430.
Click Download Drivers and
Software
. Check for the
latest firmware image version
at the bottom of the page. If
this firmware image is newer
than the one installed on the
printer and the printer can
receive a firmware update,
download the newer firmware
upgrade. Not all printer
models can receive firmware
upgrades.
4. Try printing a job from a
different software program. If
the job prints, go back to the
first program and try printing a
different file. If the message
appears only with a certain
software program or print job,
contact the software vendor
for assistance.
1. After performing the actions
listed in the preceding item, if
the message persists when
using different software
programs and attempting
specific print jobs, disconnect
all cables that connect the
printer to the network or a
computer.
2. Turn the printer off.
3. Remove all memory DIMMs
or third-party DIMMs from the
printer. (Do not remove the
firmware DIMM in slot J1.)
4. Remove all of the
EIO devices from the printer.
5. Turn the printer on.
6. If the error message
disappears, reinstall
each DIMM and EIO device
individually, making sure to
turn the printer off and then
on again as you install each
device. To replace a DIMM,
see.
7. Replace the DIMM or
EIO device that caused the
error message.
8. Remember to reconnect all of
the cables that connect the
printer to the network or
computer.
9. If this error message persists,
replace the firmware DIMM.
10. Replace the formatter

Jul 14, 2008 | HP LaserJet 2420 Printer

1 Answer

When attempting to install Print Artist Version 22/ Platinum Edition, I received the following message: Error 2350. FDI Server Error I tried re-installing and received the same message.


If you are using Windows XP install

windows installer 3.1

http://www.microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&DisplayLang=en

XML Services 6.0

http://www.microsoft.com/downloads/details.aspx?familyid=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en

and .NET framework 3.5

http://www.microsoft.com/downloads/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en

Jul 11, 2008 | Computers & Internet

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...