Question about Numark TTX1 Turntable

1 Answer

Both decks with same problem.

Both my TTX1's have stopped working. both decks just stopped spinning within a few weeks of each other. when the problem started I could press the stop/start button and then give them a push to get them going. But now they just dont move at all! I guessed it has something to do with the magnet inside? any help appreciated! thanks..

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers
Re: both decks with same problem.

Nothing to do with the magnet. These are direct drive turntables, and more than likely one of the ICs shorted. Unusual that both shorted out at the same time, so the only thing I could suspect is a faulty power source - make sure all of your cables are free of any exposure to the inner power cable. Also, you might want to invest in a good surge protector (in the $150 range) to protect these babies... I know they aren't cheap. You will need to get them professionally serviced, there are no user replaceable parts inside. If you can't find anyone near you to service these, our company offers free return shipping for all Nationwide service, and if your in NYC, we offer free pick up. Oh, and we are masters with DJ turntables. Unfortunately, I don't think we can post our company information here, as I do not want to violate any agreements. So, with that said, do a search using the REPAIR SERVICE search option in and go to the following section-> HOME AUDIO -> Audio Shelf Systems - we are listed there.

Posted on Sep 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The tone arm has been pulled off my deck how much will this cost to fix

If it is the TTx1/200 about $200. Have a look at this website for more details. Tonearm Base Assembly TT X1 200

Feb 09, 2016 | Numark TTX1 Turntable

1 Answer

Stanton ST 150 motor will not turn on but all lights on deck flash?

If you have misc LEDs that are flashing without due cause and a motor, I'm betting a Direct Drive motor, that won't spin, I would same you have a damaged microprocessor(computer) within your table that's bad. For more information or further questions, please visit my website at Thank you.

Dec 13, 2013 | Stanton ST-150 Turntable

1 Answer

Numark ttx/ttx1 pitch fader wonky

Try spraying the slider with Servisol Video 40.

Mar 15, 2013 | Numark TTX1 Turntable

1 Answer

Numak ttx1 turntable

If they are belt drive then you can get replacement belts from **** Smith Electronics for under 30 dollars if they are direct drive then you could check the fuses if its not either of these you might have to replace the motors which is quite inexpensive anyway

May 13, 2009 | Numark TTX1 Turntable

1 Answer

TTX1 went wacky

These are drive issues. More than likely one of the drive IC's failed. This will have to be repaired professionally.

Numark Repair Videos
Numark DJ Repair
DJ Equipment Sales
Numark Parts

Nov 24, 2008 | Numark TTX1 Turntable

1 Answer

Numark ttx turntable

More than likely the drive IC (integrated circuit) has shorted, and needs to be replaced. Not an easy fix, and you'll have to take it to a service center for replacement.

This is a common problem on this turntable.

Turntable Repair Expert
Digital Analog Therapy

Nov 14, 2008 | Numark TTX1 Turntable

1 Answer

Numark TTX1 Turntable Problem-Platter stops

This is a drive issue. Unfortunately the TTX direct drive system isn't the greatest. It's good, but it's no Technics 1200. The only way to 'fix' this issue is to have a professional look at main circuit board to see if there are any components which are burned, or damaged in any way.

Hope this helps some.

- OPTiC.
Digital Analog Therapy

Nov 04, 2008 | Numark TTX1 Turntable

1 Answer

Ttx 1 numark

hiya fixya...well i just opted,,,to take the thing to the repairs.the conclution is that the"platter rotation sensor " had burned out.sent the deck off today.will let you know the outcome,to maybe pass on this info to other ttx 1 users for near future....thanks for your responce.quote 35 quid just to confirm problem...but deducted from final bill of??????.westend dj staff are very helpful indeed where i puchased them from in the begining.

Mar 31, 2008 | Numark TTX1 Turntable

Not finding what you are looking for?
Numark TTX1 Turntable Logo

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Numark Turntables Experts


Level 3 Expert

4518 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers


Level 3 Expert

3283 Answers

Are you a Numark Turntable Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides