Question about Ricoh Aficio 2022 All-In-One Laser Printer

1 Answer

When I turn the printer on all of the alert lights go on.

Printer hasn't been used for a long time.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

Check the lcd screen of the machine if there is an error code like SC 542. with this machine it will always show what is the problem through CODEs.

Posted on Apr 24, 2013

Testimonial: "I am requesting information for an Aficio SPC221N which does not have a LCD. Thank you"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon MP450 - Password issue I am using Windows 7 os. While updating the printer's software, I experienced a power outage. When power was restored, I tried to rerun the update, but the printer...


Unplug printer shut down computer, plug in printer, reboot computer try update again. The password , is it a network printer? Open Network and Sharing Center, Look for Password protected printing, change password or set to no. It's a default setting .

Dec 20, 2012 | Computers & Internet

1 Answer

Why do I continue to get the E error message and blinking light on cartridges


The 'Ink Alert' or 'Low on Ink' message displays on the computer or on the product control panel.If the cartridge has been refilled or re manufactured, 'Low on Ink' or 'Ink Alert' or error messages appears on display panel.Replace with the new genuine cartridge which is showing error on display..

Nov 24, 2011 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

I connected my hp C5180 to my pc then printed a test page, it started to print and hasn't stopped. It just keep printing pages of code. How do I stop this???? Tried cancelling, tried turning off...


YOU NEED TO GO TO PRINTERS...AND CHANGE HOW PAGES YOU WANT TO PRINT...AND TAKE THE PAPER OUT OF PRINTER, SO IT DOESN'T USE UP ALL YOUR INK!

HOPE THIS HELPS!

Aug 31, 2011 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Hello I have a Lexmark X4650 printer. I was printing earlier this morning and then suddenly, the printer stopped working and gave the error message that left cartridge is incorrect (I haven't...


Good job in re-seating the cartridges into the printer. Try to insert a different known working cartridge to determine if your other cartridge has gone bad.

Jul 24, 2011 | Lexmark X4650 InkJet Printer

1 Answer

My HL-5050 is hooked to a HP PC with XP O/S and after many years of good service, all of a sudden it's turning off my PC like as if it was unplugged. Printer did always draw a lot of power as lights...


A laser printer and a computer should NEVER be on the same power strip. Startup on a laser printer causes so many power spikes and fluctuations, I'm amazed it hasn't blown the power supply on the computer, or killed the computer entirely.

If you have to have the printer and the computer on the same power line, add a UPS into the mix, plugging the computer in to it. This will allow the UPS to filter the power and make up for any shortfalls. A basic UPS is cheap insurance.

Jul 06, 2011 | Brother HL 5050 Laser Printer

1 Answer

After I press the green start button, I can hear the rollers making a whirring sound for a few seconds, (doing their cleaning bit) then the amber trouble light goes on. I can' t get a print in other...


Hello Jra,

By resetting the printer's power, the print buffer is cleared and certain sensors are reset. If there is invalid data in the buffer, or sensors are stuck in a particular mode; errors may occur. Follow these steps to reset the printer:
  1. Turn the printer off with the Power button (if available).

  2. Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared) .

  3. Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. If troubleshooting a communication issue, reconnect the data cable (not applicable to WiFi, Bluetooth or Infrared).

  4. Turn the printer back on.

Jun 22, 2011 | Canon Pixma iP2600 Photo InkJet Printer

1 Answer

Is it not possible for a Canon "expert" to give a single solution answer to the error "6C10" that so many of us seem to get. The rest of the printer functions are fine. It's not...


Hello pattrickdavi
Try this solution :
Start with printer off
  1. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
  2. While holding the Power button, release the Resume Button.
  3. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
  4. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
  5. Turn off the printer and turn on again This solution came from http://www.fixya.com/support/t4097826-aborber_full_error_message#sf and seems to work with several issues . Good luck ! fanaudi .

May 19, 2011 | Canon PIXMA MP540 All-In-One InkJet...

1 Answer

Reset my router and printer wont work wireless


It probably is hasn't let go of it's old ip address. First try power down/up for printer and PC. If that doesn't work, uninstall and re-install the printer.

Apr 21, 2011 | Brother MFC 7840W Printer

1 Answer

Alert code


What is the message that should be display in the LCD display? The Alert light signals a problem the printer thinks it has and usually display amessage in the LCD display to help a user determine what may or may not need repair or service.

Jan 21, 2008 | Zebra S4M Thermal Label Printer

Not finding what you are looking for?
Ricoh Aficio 2022 All-In-One Laser Printer Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

fares

Level 1 Expert

67 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...