Question about Pioneer DV-270-S DVD Player

2 Answers

Progressive scan, no pictures on tv

I have a Pioneer DV-373-S DVD Player and i accidentally set it on Progressive Scan and now i can't watch any DVDs. I am unable to set it back because the screen is only showing black. I need instructions on how to set it back or how to reset it to the original factory settings.
Brian

Posted by on

  • Anonymous May 05, 2009

    i have the same problem suddenly i enter the progressive scan mode but i dont know how to remove pls help me

  • hoaf73 May 07, 2009

    is there a way of reconfigure by using the remote control, some kind of code so i can shutdown the progresive scan mode?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Hold down stop button and turn on standby button this will reset to normal mode.

Posted on Jun 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No, its not working,
i want to off prograsive mode.

Posted on Feb 28, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I've a small problem cocerning this dv-363 player. I accidentally set it to 'progressive'. Now I cannot undo. I tried holding the buttons on remote and on machine itself, still not working, can you...


Progressive Scan is a menu option relating to video output of this player. Assuming you have the original DVD remote, this should be easy.

* From the user manual (pages 50-51 of the pdf document):

About progressive scan video
Compared to interlace video, progressive
scan video effectively doubles the scanning
rate of the picture, resulting in a very stable,
flicker-free image. Progressive scan video is
available only from the component video
output.

If you connect a TV that is not compatible
with a progressive scan signal and switch
the player to progressive, you will not be
able to see any picture at all. In this case,
switch everything off and reconnect using
the supplied video cable (see Easy
connections on page 14), then switch
back to Interlace. Switch the player to
standby then, using the front panel
controls, press STANDBY/ON while
pressing 'back to Interlace.

Hold these 2 buttons together for about 10-15 seconds or so, but only while the player is in standby mode. *

If you have lost the manual, you may be able to download the user guide (as an adobe reader (pdf) document) from:

http://www.retrevo.com/support/Pioneer-DV-363-K-DVD-Players-manual/id/385bh937/t/2/

(it will ask you for an email address prior to downloading - use a blank address if possible and enter the security code in the fields then save the document)

If the above suggestion does not switch it back to interlace, you will need a TV with progressive scan function to enable you to access the player's on-screen menu and in 'Initial Settings' 'Video Output' 'Component Out' section, select 'Interlace'. and press OK from remote as required.

Either way, it should NOT require a workshop service, and is simple enough to do at consumer level with the right TV type.

Mar 05, 2011 | Pioneer DV-363 DVD Player

Tip

Pioneer DVD-400V DVD Player Interlace Reset


Pioneer DVD-400V Interlace Reset

ee72d93.jpg

df1c038.jpg

To switch your Pioneer DV-400V DVD player back to an interlaced video mode after selecting a progressive scan mode and loosing picture, follow these steps:

  1. Switch everything off.
  2. Reconnect using the supplied video cable (standard RCA Red White & Yellow).
  3. Switch the player to standby.
  4. Press and hold the Standy/ON button while pressing the |<< button.
This resets your player to default video output, allowing you to reconfigure your HDMI settings to 1080i, and then reconnect your HDMI cable.

I hope that helps.
_____________________________________
Pioneer DVD-400V Manual Download
Pioneer DVD-400V HDMI Reset

on Jun 06, 2010 | Televison & Video

Tip

Pioneer DVD-400V DVD Player HDMI Reset


Pioneer DVD-400V HDMI Reset

Model: Pioneer DVD-400V

c552e45.jpg


41457bd.jpg

To switch your Pioneer DV-400V DVD player back to an interlaced video mode after selecting a progressive scan mode and losing picture, follow these steps:

  1. Switch everything off.
  2. Switch the player to standby.
  3. Press and hold the Standy/ON button while pressing the |<< button.
This resets your Pioneer DVD-400V player HDMI output format to 480p.

I hope that helps.
_____________________________________
Pioneer DVD-400V Manual Download
Pioneer DVD-400V Interlace Reset

on Jun 06, 2010 | Televison & Video

1 Answer

I accidentally pressed progressive scan on my DV 366 player and my TV screen went blank. I can listen to music now by there is no picture on the TV screen. How do I correct it?


You will have to press the progressive scan button again, but most of the time you will have to remove any discs that are in the unit first, before you press the buton again

Aug 30, 2009 | Pioneer DV-366K DVD Player

1 Answer

Magnavox MDV560VR DVD/VCR combi


f you accidentally set Progressive Scan to ON (within
Analog TV), press STOP 9 for five seconds to restore the
picture to normal operation.

Aug 13, 2008 | Philips Magnavox DVD/VCR Dual Player

Tip

Pioneer DVD-400V HDMI Reset Model: Pioneer DVD-400V To switch your Pioneer...


Pioneer DVD-400V HDMI Reset

Model: Pioneer DVD-400V

c552e45.jpg


41457bd.jpg

To switch your Pioneer DV-400V DVD player back to an interlaced video mode after selecting a progressive scan mode and losing picture, follow these steps:

  1. Switch everything off.
  2. Switch the player to standby.
  3. Press and hold the Standy/ON button while pressing the |<< button.
This resets your Pioneer DVD-400V player HDMI output format to 480p.

I hope that helps.
_____________________________________
Pioneer DVD-400V Manual Download
Pioneer DVD-400V Interlace Reset

on Jun 06, 2010 | Pioneer DV-400V DVD Player

Tip

Pioneer DVD-400V Interlace Reset To switch your Pioneer DV-400V DVD player...


Pioneer DVD-400V Interlace Reset

ee72d93.jpg

df1c038.jpg

To switch your Pioneer DV-400V DVD player back to an interlaced video mode after selecting a progressive scan mode and loosing picture, follow these steps:

  1. Switch everything off.
  2. Reconnect using the supplied video cable (standard RCA Red White & Yellow).
  3. Switch the player to standby.
  4. Press and hold the Standy/ON button while pressing the |<< button.
This resets your player to default video output, allowing you to reconfigure your HDMI settings to 1080i, and then reconnect your HDMI cable.

I hope that helps.
_____________________________________
Pioneer DVD-400V Manual Download
Pioneer DVD-400V HDMI Reset

on Jun 06, 2010 | Pioneer DV-400V DVD Player

1 Answer

Progressive scan mode


f you accidentally set Progressive Scan to ON (within
Analog TV), press STOP 9 for five seconds to restore the
picture to normal operation.

Aug 13, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Progressive scan


Approach 1: Try unplugging the DVD player from the wall for an hour, then plug it back in. It may or may not reset to the factory default settings, which might put it back to "interlaced" output.

Approach 2: When a DVD player is switched to progressive scan, it uses outputs different from the coax cable "TV out" and the COMPOSITE outputs (often yellow, white and red RCA jacks. If you have the proper cables, you can connect them to both the DVD player and the TV, then cycle through the AKAI TV's "source" settings to switch the TV to the new cable input location.

For example, if the DVD player has "component" outputs (marked Y, Pb, and Pr) hook up RCA plug cables between those jacks and the AKAI TV's Y, Pb, and Pr jacks. Connect the Y to Y, the Pb to Pb, and the Pr to Pr, of course. The LCT3285TA has two sets of these jacks. Either will do, but note if you use YPbPr1 or YPbPr2. Once this is done, push the source button on the side of the TV (or on the TV's original remote) until it shows YPbPr1 or (...2 if that's what you connected). If the DVD player is on, you should now see the DVD menu or the picture from the DVD. Now you can use the DVD remote to switch back from progressive to interlaced video. The picture may go blank at this step.

Now push the TV's source button again until you see "3" or whatever channel you had been using in the upper left of the TV screen. You should see the DVD output picture (menu) again. Back to normal.

If your DVD player doesn't have YPbPr connections, it may have a HDMI or DVI jack.
The AKAI TV also has a HDMI input, you *could* get and HDMI cable (or DVI to HDMI cable if the DVD player doesn't have HDMI), hook it up, then cycle through the TV's source inputs until you see the HDMI in the upper left... in the manner I've just described.

Final Note: The progressive scan output of your DVD will actually give you a much better picture on your AKAI TV than its interlaced output. To take advantage of that, you'll have to hook up YPbPr or HDMI cables between player and TV and switch sources when you want to watch DVDs instead of TV programs. You may need additional cables to send the stereo audio output from the player to the TV for the progressive source hookup.

Jan 05, 2008 | Akai LCT3285TA 32 in. LCD Television

3 Answers

Progressive scan


lpug ur dvd. without turning the power on press and hold the stop button then press the power button

Sep 22, 2007 | Pioneer DV-373 DVD Player

Not finding what you are looking for?
Pioneer DV-270-S DVD Player Logo

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73150 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...