Question about Uniden 5.8GHz Dual Cordless Phone

Open Question

Uniden phone, outgoing message is garbled

I can receive calls but cannot cal out because of the garbled or non existant message

Posted by on

6 Suggested Answers

SOURCE: Mic not working.

I had that problem, i took apart the handset, and used alcohol on the mic to clean it up. I also got rid of that black cover over it. I think the glue got all up in it and is stopping the mic from working. The cleaning fixed mine up.

Posted on Dec 14, 2007

One Wire
  • 126 Answers

SOURCE: personalize outgoing message

Here is the uniden website page for cordless phone manuals. Just locate your model # and click on it. It will download it in pdf format.

http://www.uniden.com/index/manuals_results.cfm?cat=1

Posted on Jan 26, 2008

divatif
  • 39 Answers

SOURCE: uniden 5.8Ghz phone.

You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.

Posted on Mar 17, 2009

supernova278
  • 1932 Answers

SOURCE: Have lost manual for Uniden Elite 9035 answer

Hi,

You can download the manual from below adress and setting up/reseting of the answering message proceduer is given in Page 43.

http://www.uniden.com.au/RESOURCES_MAIN/pdfs/ELITE_9035_OM%20Final.pdf

thanx

Posted on Jul 24, 2010

supernova278
  • 1932 Answers

SOURCE: searching and out of range message keep appearing.

Hi,

This is because of the following reasons

1.The handset is far away from the base unit.Try to bring the hand set near the base unit and try.
2.The base unit is not plugged in to the power supply.Please check it.

Thanx

Posted on Jul 27, 2010

  • 4758 Answers

SOURCE: How do I take Uniden

It depends on the reason for the in use message on the line. It could be the phone or the wiring. To diagnose the problem, I like to use an old corded phone.

Plug a different phone into the jack (where the cordless base is); use a new telephone cord. Do you have a normal dial tone? If yes, try the cord with the cordless phone's base; if this doesn't solve the problem, then the problem is the phone. If the phone is bad and under warranty, contact Uniden. These phones are really not meant to be serviced by the user.

Otherwise, try the second phone at another extension. If you get a dial tone, then the problem may be the jack where the cordless phone's base is plugged in. Try the cordless phone and see if you still get the message.

If you didn't get a dial tone, find where the phone service comes in. If you have a new install, you will find that your service line uses RJ-11 jacks. Plug your second phone into the jack and check for dial tone. If the phone still doesn't work, call your phone company. There is a problem with the wiring to your location and they will fix it as part of providing the service. Otherwise, the problem is with the wiring inside your home.

For indoor wiring issues, check any exposed wires for damage. Open the wall plate and check for a loose wire. Some will terminate with screws - just loosen the screw, strip more of the strand wire's insulation if needed, wrap it around the screw and tighten carefully. Others will use a keystone jack. Open the cover (just lifts off) and check the strands. You may need to remove the wire, cut it back and strip a new section of the outer insulation. Then using a special tool push each strand fully into the appropriate slot (do not strip the strand insulation). This tool is sold in many hardware stores in the wiring section alongside the keystone jacks. A plastic version is included with many keystones.

If the wiring problem is deeper inside the walls, you may want a professional. Your telephone provider will do this for a fee.

I hope this helps.

Cindy Wells
(a few weeks ago, we had an open line due to mice eating the wires near the road. It wasn't the first time for the problem. We've also lost a dial tone due to a failed filter for the DSL after a lightning strike and when a road crew dug up the wire by accident.)

Posted on Dec 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change outgoing message


Try contacting Uniden for a manual. You may be able to download a copy

Apr 03, 2013 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

How do I reset the outgoing message on a Uniden Dect 6.0 cordless phone?


Since you didn't specify the model of your Uniden DECT 6.0 system I can only suggest you select it from the list beginning here to download a copy of the manual.

Mar 19, 2013 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

How do I record a message outgoing?


Since you declined to specify the model of your Uniden system, I can only direct you to select it from the list here to download a copy of the manual.

Dec 19, 2011 | Uniden Phones

1 Answer

Answering System


Your phone is set in "Announce" mode where it only plays an outgoing message and does not record any incoming messages. You want to switch to "Answer" mode.
Since you declined to specify the model of your Uniden DECT 6.0 system, I can only direct you to select it from the list beginning here to download a copy of the manual.

Dec 01, 2011 | Uniden DECT 6.0 Cordless Phone

1 Answer

Can you set a personal outgoing message on a Dect 1560-2 Phone and if yes, how? Thank you!


No, you can't set an outgoing message since the Uniden DECT1560 isn't an answering machine.

Feb 02, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Everytime I try to make an outgoing call, I get a message "handset out of range" and I cannnot complete the cal


Hi,

This is because the base unit is much for away from the hand set.So it lost communication from the base unit. So please move cloaser and try again.

Thanx

Jul 21, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Cannot acess option to record outgoing message need to get to option 8 to record message


All phone is no recoed outgoing ok than you can incoming call to record tha message

Oct 05, 2009 | Uniden 5.8GHz Dual Cordless Phone

1 Answer

Cannot change outgoing message on Lucent Partner 18D phone system


For an extension of the Main Automated Attendant greeting when callers call in.

Which voicemail do you have? You indicated the phone model, but not the voicemail model.

Jun 16, 2009 | Avaya Lucent Partner 616 Phone

1 Answer

OUTGOING CALLS PROBLEM


I TOOK THESE PHONE SETS BACK TO SAMS AND GONE A NEW ON THAT WORKS FINE. UNIDEN SAID THERE WAS AN INTERNAL PROBLEM ON THE PHONE IN QUESTION.

Mar 19, 2009 | Uniden TRU8885-2 Cordless Phone

1 Answer

Cannot make out going calls.


;change to pulse from to tone. Addressing with uniden and my phone co.

Jan 06, 2009 | Uniden Cordless Phone

Not finding what you are looking for?
Uniden 5.8GHz Dual Cordless Phone Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96576 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...