Question about Sunbeam Ultrasonic Humidifier

1 Answer

No mist, but i can see a water droplet fountain on the surface

My sunbeam personal ultrasonic humidifier do not generate mist. Sometime it does ( a small quantity) when the machine initially turn on and then it will stop. When I take the water reservoir away with the machine turn on, i can see a tiny water fountain, with water droplet splashing. I suspect the ultrasonic transducer is defective. Is it possible to replace it. What would be the electronic part number for this part? Does it worth to repair it as a new one currently cost around 30$.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

If it's a cool mist unit it will not produce any mist. now if it's a warm mist unit it should. that's normal. it is possible to replace the transducer if it is damage but you are going to have some leakage from it. but the only way to get the transducer mainly is from the manufacturer

Posted on Aug 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clean the dual tank ultrasonic humidifier membrane


Air Innovations Clean Mist Ultrasonic Dual Tank Humidifier ...

www.qvc.com/Air-Innovations-Clean-Mist-Ultrasonic-Dual-Tank-H...

QVCAir Innovations Clean Mist Ultrasonic Dual Tank Humidifier. Air Innovations ..... I did not realize that you needed a special filter if you have hard water. If you do ...

Sharper Image Dual Tank Warm &Cool Mist Ultrasonic ...

www.qvc.com/Sharper-Image-Dual-Tank-Warm-&Cool-Mist-Ultras...

QVCSharper Image Dual Tank Warm &Cool Mist Ultrasonic Humidifier ..... I've only had toclean the membrane once since I purchased it, and that's really not a big ...

How to Repair an Ultrasonic Humidifer ' eBay


Dec 14, 2015 | Humidifiers

1 Answer

Just stopped giving mist


Depending upon the hardness of your water supply, humidifiers sometime have to be "primed" to get them going. This information should be contained in the instructions for use

May 04, 2013 | Sunpentown Cool Mist SU-2000 Ultrasonic...

1 Answer

Sunbeam Ultrasonic Humidifier SUL495 quit working in first week. What may have happened.


Same problem. It worked for about a week, then gradually stopped producing mist. No solution.

Nov 29, 2010 | Sunbeam Ultrasonic Humidifier

2 Answers

WHY DON'T MIST COME OUT OF MY HUMIDIFIER


with cool mist humidifiers your not suppose to see any mist. if it's a warm mist there should be. but by your model number i'm finding that it's a cool mist. that's why your not seeing any mist.

Aug 15, 2009 | Vicks Cool Mist V3500 Humidifier

2 Answers

We have a Sunbeam Cool Mist Ultrasonic Humidifier that we bought just over 2 months ago. Up until a couple of days ago, it was producing mist and running just fine. I cleaned it with the brush and got the...


I have this same problem. And cool mist humidifiers DO produce mist. I have had my humidifier for a while now (6 years) and have never had any problems. But after the most recent cleaning, it worked at first, but now seems to not be working anymore... Am also wondering if there is anything I can do to remedy the situation?

Mar 17, 2009 | Sunbeam 701 Humidifier

1 Answer

Sunbeam Ultrasonic Humidifier, model: 697-6


Located My Manual:
Hope this helps!

1. Remove tank from base. Turn upside down and unscrew filling cap. Fill tank with clean, cool, distilled, or tap water. Water temp should NEVER be too hot or too cold. Return tank to base and let sit for a few minutes. Be sure the filling cap of the tank is tightened firmly.

2. Plug power cord into a 110-120V AC wall outlet only. Turn power switch to "on" position. Power light will illuminate. Turn mist nozzle until desired level is being released. Aim nozzle away from furniture and walls.

3. Always turn humidifier off when water runs* out. Unit will continue to operate when tank is empty.
*Humidifier will run up to 12 hrs on low; 6 hrs on high.

DO NOT LET WATER SIT IN TANK FOR LONG. THIS CAN ENCOURAGE BACTERIAL GROWTH.
Place unit on level surface away from direct sunlight.
DO NOT ADD MEDICATION OF ANY TYPE INTO THE NOZZLE, BASE, OR WATER TANK.
ALWAYS LEAVE ROOM DOOR PARTLY OPEN. DO NOT MOVE, TILT, OR EMPTY WHILE OPERATING.

Mild bleach and water solution for cleaning, never detergent.
Clean every 3rd day during use. Clean after long storage
Humidity varies from room to room. Aim for 30 - 50% relative humidity. If windows/ walls fog or frost, reduce mist intensity. If room too humid, ventilate by opening door or window; adjust mist intensity.

Sep 22, 2008 | Sunbeam Ultrasonic Humidifier

2 Answers

Sunbeam ultrasonic cool mist humidifer model 700


The Problem is minerals in the water. Impeller and ultrasonic designs send these minerals into the air. If the water in your area contains a lot of minerals, you will notice them as dust. The EPA does not issue health warnings about minerals in the air, but does recommend using low-mineral water (such as distilled water) in your humidifier. Many ultrasonic models feature a demineralization cartridge that filters minerals out of the water to prevent the dust.

Good Luck.

Feb 17, 2008 | Sunbeam Ultrasonic Humidifier

1 Answer

Humidifier mist won't come out of tube


sounds like the small fan that is located in the base isn`t pushing the mist out. unplug it then take all the screws out of the base. there are screws under the black foam stands too. be careful not to touch anything that looks like live wires while you look inside then look inside while it is pluged in. it should turn. check for something blocking it like lint or dirt..you may be able to clean around the shaft with w d 40

Dec 31, 2007 | Sunbeam Ultrasonic 81696 Humidifier

Not finding what you are looking for?
Sunbeam Ultrasonic Humidifier Logo

1,180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunbeam Humidifiers Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Paul Sikkema
Paul Sikkema

Level 2 Expert

171 Answers

mike

Level 2 Expert

62 Answers

Are you a Sunbeam Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...