Question about Projection Televisions

1 Answer

TV WENT OFF AFTER WATCHING AND NOW IT WON'T GO ON AT ALL

IT MAKES A CLICKING SOUND BUT NOTHING ELSE HAPPENS.

Posted by on

  • 1 more comment 
  • litlcw54 Mar 12, 2009

    Mine did same thing...power light on...while watching a movie picture and sound both went out...so warning...nothingh

  • Anonymous Apr 16, 2009

    same problem here...help!!!

  • ldapaz Apr 16, 2009

    I have the same problem...someone HELP please!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try to do the following, it didn't work for me but it may work for you...


The STANDBY light will flash if an issue is detected within the television. This can sometimes be resolved by simply following the steps below to reset the television.

  1. Turn off the television. IMPORTANT: For a projection television that uses an internal lamp, wait 5 minutes after turning off the television to allow the lamp to cool before continuing with the following steps.
  2. Unplug the television power cord from the electrical outlet.
  3. Let the television remain without power for 60 seconds.
  4. Plug the power cord back into the electrical outlet. NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
  5. Turn on the television.
If the issue is still unresolved after following all of the troubleshooting steps, service may be required. Please note the number of times the STANDBY light flashes and relay that information to the service center.

Posted on Apr 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sound won't work


If your TV has a picture but no sound, start by checking the obvious such as whether the mute button is on or whether the volume has been turned all the way down.

Next check your cable connections and make sure everything is plugged in tightly.

Change channels to make sure that it's not a technical difficulty with your TV service provider or TV station. Call your service provider to see if they're experiencing issues with their audio.

Try reconnecting the HDMI cable after you turn off the TV.

Make sure your remote is on the correct input, and see if you have sound while playing a DVD or video game.

For a simple troubleshooting checklist, see No sound on TV and get more details on some simple fixes for this problem. I hope this helps!

Sep 13, 2012 | Mitsubishi WD-73735 Television

1 Answer

I was watching tv and it made a couple of zapping sounds and the picture went black. I cannot tell if the tv is on or off and when I push the on/off button, nothing happens.


Bad FBT flyback Transfomer or high voltage Trippler block is a common Part that goes Bad
in this Model. Call ACME 1-800-575-9833
You must disconnect FBT lead going to HVT and this will tell you which Part is Bad.

Oct 12, 2010 | RCA P52926 52" Rear Projection Television

1 Answer

TV makes humming noise, lamp light is blinking, does not turn on


Your color wheel needs to be changed. Mine just did the same thing. I changed mine, and the buzzing sound went away, however now my picture washes out with light or yellow colors. The darks look green and purple also.

Mar 28, 2009 | Samsung HL-R6167W 61" HDTV

1 Answer

Nothing happens. power on,can hear click


I had the same problem, but I saw the events leading to it. I was watching TV, went to help the wife, heard a pop, came back to find the TV off. Turned it on, heard the same click you described. I believe you need a new bulb. Mine lasted around 2 years of heavy use. Bought two on ebay. Make sure to consult your manual for the particulars on the bulb.

Jan 07, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

No power


Replace Convergence IC's STK392-110 and any burnt resistors
& check fuses F851,852,853,etc.........................T

Aug 11, 2008 | Toshiba 42H81 42" Rear Projection...

1 Answer

No power


Good Day, jennylo04;

You need help??? I need help, too!!

Please help me by providing a MODEL NUMBER. OKAY??

Thank you, big IRISH,.

Aug 07, 2008 | Projection Televisions

1 Answer

TV will turn on, but not respond


Good Day, mistymiles;

Try this before calling a factory authorized service center:

Press " menu 2 > 4 > 7 > 0 > enter", on remote. After settings have been initialized > press the system reset button on the front, once the LED stops blinking > reprogram settings and tuner channels (if not using box). IF NOT fixed call for service (get estimate before repair) and suspect repair of DM PCB (printed circuit board).

Good Luck, big IRISH.

Jul 31, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

SONY TRINITRON XBR


There any number of problems that could have caused the shut down. Depending on how old the set is make your decision on whether it would be wiser to replace it

Jan 14, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Toshiba theaterview tz50v51


my guess would be flyback however your lucky you might be able to see a burnt spot on the board giving you a better clue.

Nov 25, 2007 | Toshiba 55H70 55" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...