Question about E-Machines eMachines Desktop PC

1 Answer

EMachine EL1333G windows 7 64 bit AMD Athlon 2650E Processor ( BIOS OVERCLOCK HELP)

If I overclock my AMD Athlon 2650E Processor 1.6GHZ (15watt) What is the maximum setting I can set, without causing any damage to the computer, or even having to worry about it?

Posted by on

  • Troy Alan Kinser Apr 23, 2013

    I have Windows 7 64 bit, and I'm not talking about the recovery, I'm talking about if I edit the BIOS setting what is the maximum CPU clock and maximum Voltage I can set without burning my computer up?

  • Anonymous Mar 21, 2014

    processor specs.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • E-Machines Master
  • 5,660 Answers

Troy,

When Processors (CPU) are made, they are made on a Pass/Fail scale. Processor is either Good, or not good.

This means you may get a Processor that is on the Top of the scale, or Bottom of the scale. The AMD factory doesn't discriminate.

In fact they don't care. (This goes for all Processor manufacturers, not just AMD)
All they care about is does the Processor work, or not?

Therefore, you may have a Processor that is on the Bottom of the scale, but passed as Good.

Point? Stating a setting that might be good for joeblow's AMD Athlon 2650e, may not work for yours.

Might work for yours, and not joeblow's.

This is why you need to go into BIOS Setup, and using a SMALL increment, overclock the Processor.
Run the computer for 24 hours, and see if everything is chiily.
(Computer still works OK)
This is a "Burn-In test"

Works OK for 24 hours? Then go back into BIOS Setup, and go up one more small increment. Do the Burn-In test.

Keep going until the computer has glitches, or doesn't work.
Then go back into BIOS Setup, and come down one small increment, or go back to where the computer WAS working OK.

It's an individual thing. Each Processor (CPU) is different from the others.

For additional questions please post in a Comment.
Regards,
joecoolvette

Posted on Apr 23, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
PABLOCSA
  • 1124 Answers

SOURCE: Don't know how to reformat my emachine T5010 desktop PC

Reformatting your Windows computer is usually the absolute last resort and is often done unnecessarily. Before you go through the process of doing a reformat of your hard drive please take a few moments to read through the rest of our website. If you are reformatting to fix problems with your Windows computer it's possible that by using some of the tips on our site, or by downloading or purchasing some of the tools or products that we link to, you might be able to avoid the need to reformat your computer. Because doing a complete reformat of your computer will erase the contents of the hard drive and require you to reinstall all software, reformatting is usually a last resort. Some Computer Manufacturers Make Reformatting EasyMany name-brand PC manufacturers include a restore-disk which makes it easy to reformat your PC and return it to the state it was in on the day you purchased it. Some manufactures supply only a standard Microsoft Windows CD, and some (usually lower-end PC manufacturers) supply neither! If your PC did not come with a restore or reformatting CD, then you will need to take extra steps to format your hard drive and get Windows re-installed. Back Up Your Files Before You Reformat Your Windows PC!Because the reformat or restore process erases everything on your computer, it is critical to have a backup of any important files on your computer. You will also need your original software install disks to reinstall any software you have purchased.
Things to do before you reformat your PC hard drive

  • Write down or print out all notes and internet pages because once the format process begins, you will no longer have access to them (or anything else in the PC)
  • As already stated, BACKUP all important files and data! When you reformat your computer everything will be erased!
  • Make sure you have all the CDs and other software. All programs will have to be reinstalled after you format the hard drive. Don't forget about software that came with hardware such as printers, scanners, etc.
  • Write down the brand and information for all the hardware on your computer. Look in the Device Manager and make note of the brand and model of network adaptors, video cards, sound cards, printers, modems, and displays. After reformatting you might need this information to reinstall drivers.

Posted on Nov 15, 2008

  • 32 Answers

SOURCE: Problems with used Emachine W3623 Windows vista Home basic

Simply put, No.

Chances are the performance of vista on an eMachine is an ugly sight anyway. My advise would be to downgrade to XP or try a good solid Linux distribution like Ubuntu. It will preform faster and be more stable that it ever was with Vista. Don't get me wrong I am not a total vista hater but it is a hog.

Best of Luck

Posted on Dec 16, 2008

  • 202 Answers

SOURCE: Restore back to factory setting

take any of vista disk(any copy)
boot with cd in repair option get restore click.

Posted on Jan 25, 2009

SOURCE: I have the EL1333G-01w emachine and would like to

yes you can upgrade your PC

folow the Site
http://www.walmart.com/ip/eMachines-320-GB-EL1333G-01w/13352324#ProductDetail

Posted on Apr 13, 2010

sayedmohu
  • 635 Answers

SOURCE: BootMGR is missing Ctrl +Alt+Delete to restart

You will have to repair your operating system or do a complete system recovery.

Posted on May 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to overclock amd cpu


You question is a bit vague, type of AMD processor?, it's a bit more complicated, take a look at this: http://apcmag.com/free-your-amd-how-to-overclock-amd-in-5-easy-steps.htm

Apr 29, 2013 | Computers & Internet

1 Answer

EMachine EL1333G windows 7 64 bit AMD Athlon 2650E Processor ( BIOS OVERCLOCK HELP)


What type of cooling do you have currently? How fast do you want it to go? What options does your BIOS offer?

Apr 23, 2013 | E-Machines eMachines Desktop PC

1 Answer

Amd athlon xp 2400+ problems witha epox ep-8kra2+ motherboard?


It sounds to me like the processor that you bought is not fully supported in the current bios in your mobo. I would check the epox website for newer bios. Be careful flashing the bios, if you misstep in the flash, you may end up with a brick. If you are successful, you should be able to run the processor at the speeds you expected, though within the limits of the hardware on the mobo. Also look at the spec's for the mobo on the site to see if your processor is listed as being supported.

Feb 14, 2010 | EPoX EP-8KRA2+ Motherboard

1 Answer

How to get AMD athlon 3700 socket 754 engineering sample cpu run at proper speed


Here's a little history
http://compreviews.about.com/cs/pchardwarebasics/a/aaBIOS.htm

More advanced stuff
http://compreviews.about.com/gi/dynamic/offsite.htm?zi=1/XJ&sdn=compreviews&cdn=compute&tm=128&gps=215_11_1267_540&f=00&su=p284.9.336.ip_p504.1.336.ip_&tt=2&bt=0&bts=0&zu=http%3A//www.adriansrojakpot.com/Speed_Demonz/BIOS_Guide/BIOS_Guide_Index.htm

Some systems have "bottlenecks," where small overclocking of a component can help realize the full potential of another component to a greater percentage than the limiting hardware is overclocked. For instance, many motherboards with AMD Athlon 64 processors limit the speed of four units of RAM to 333 MHz. However, the memory speed is computed by dividing the processor speed (which is a base number times a CPU multiplier, for instance 1.8 GHz is most likely 9x200 MHz) by a fixed integer such that, at stock speeds, the RAM would run at a clock rate near 333 MHz. Manipulating elements of how the processor speed is set (usually lowering the multiplier), one can often overclock the processor a small amount, around 100-200 MHz (less than 10%), and gain a RAM clock rate of 400 MHz (20% increase), releasing the full potential of the RAM.

AMD also produced x86 designs which competed with Intel on performance rather than price. In January 2002 the Pentium 4 gained a lead in sales and AMD marketing responded by giving their processors numeric suffixes approximating the clock rate that an AMD Thunderbird (and by inference a Pentium processor) would need to give matching performance, openly undermining the "megahertz myth".

May 15, 2009 | Computers & Internet

1 Answer

Overclocking


I never overclock my processors... because I have fried a couple.

AND I don't really need any extra power/speed... because now I only surf the web and do some Word/Excel stuff and my duo core Intel chip is awesome for that.

So - first: I don't recommend it.

But - second: there are some good sources on the web about it...

Do you know how to do it?
I mean the steps to get to the settings and change them?

If you do then I found some recommendations for your processor at http://www.amdgeeks.net/overclockdatabase.

====================================
Processor: Athlon 64 LE-1640 2600 @ 3422 MHz
Overclock % Voltage Idle Load
132% 1.25/35/40 @ 1.50V 35°C 41°C

Processor: Athlon 64 LE-1640 2600 @ 3380 MHz
Overclock % Voltage Idle Load
130% 1.25/35/40 @ 1.40V 30°C 40°C

Processor: Athlon 64 LE-1640 2600 @ 3320 MHz
Overclock % Voltage Idle Load
128% 1.25/35/40 @ 1.37V 29°C 44°C
===============================
Like I said I don't recommend it so I don't want to walk you through it, also when you do this you run a risk of frying your chip - and I don' want to be liable. Like I said above - there is some good infor on the web about it so you should not have any trouble finding out how if you don't know.

Good luck

Jan 03, 2009 | Acer Computers & Internet

1 Answer

Foxconn or my processor fried while i tried to overclock my comp


Foxconn are miserable at overclocking and X2 - 6000 is a proc already overclocked from factory - you can't push it any further without a serious water cooler.
Reset the BIOS and hope it will start again, otherwise you will need at least a new proc.

Dec 24, 2008 | Computers & Internet

1 Answer

Overclock procesor athlon 64 2800 +?


There are a bunch of guides out there to help you with the overclocking process.But bear in mind that you will loose your warranty as son as you change the frequency cycles. Also make sure that your system can withstand the excessive heat that will be generated by the processor.You should arrange some alternative cooling system like liquid coolers,Highgraded thermal insulation pastes or atleast a couple of additional coolant fans. Go through this.... http://www.hardwaresecrets.com/article/102

Nov 03, 2008 | AMD Athlon64 2800+, 1.8 GHz Athlon 64...

1 Answer

Can the amd athlon 4200 x2 proceesor be overclocked ? on the geforce6100pm-m2 motherboard


not a good idea over clock it to much without the right cpu heat sink and faster fan will make it over heat and possably blow up it should work with 2.4 if not u need at least a 450 watt power supply with that card

Oct 26, 2008 | AMD Athlon 64 4000+, 2.4 GHz...

1 Answer

Overclock a black edition 5000 x2


@johnhercus26
pls let me remind you that overclocking voids your pc's warranty.you will need to enhance the cooling solutions for the device you will overclock plus the cooling solutions for the CPU case, every time you overclock, more heat is produced by the device you are overclocking. also you have to make sure you have power headroom..., a higher wattage CPU power supply. plus the risk that you may toast your pc or lessen its usable life. overclocking is for advanced users so pls take extra caution if you will do it.. for guide and instructions pls click here and goodluck! >>> http://www.pcstats.com/articleview.cfm?articleID=1804

Oct 23, 2008 | AMD Athlon 64 X2 3800+ Dual Core Processor...

1 Answer

Sandrew


There are different ways to overclock, however some methods might harm the CPU I am adding the link which shows the methods. here is the link
http://www.amdboard.com/ocspecial.html

Also please make sure your BIOS supports overclocking
Good Luck

Jun 19, 2008 | AMD Sempron 2800, 2.0 GHz 2800+...

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...