Question about Linksys (WRT54GC) Router

1 Answer

I had this set up with a cable company yesterday and when i got today i have not been able to get online with my computer hooked up to lindseys router which i was using for months with the other company but i changed to a dsl high speed internet

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Hii
Just do a powerrecycle for one minute - e.g trun off router then turn off modem - wait for 1 minute then turn ON modem first wait for lights to get stabled , then turn on your wirless router -- i am t will work for you

Posted on Mar 29, 2009

  • savdeepbedi Mar 29, 2009

    Hii

    Just do a powerrecycle for one minute - e.g trun off router then turn off modem - wait for 1 minute then turn ON modem first wait for lights to get stabled , then turn on your wirless router -- i am t will work for you

  • savdeepbedi Mar 29, 2009

    Hii

    Just do a powerrecycle for one minute - e.g trun off router then turn off modem - wait for 1 minute then turn ON modem first wait for lights to get stabled , then turn on your wirless router -- i am t will work for you

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot connect to the interent with Shaw Cable. Problem just occured today. When I hook my internet directly to my computer it works fine. Shaw tells me this is a global problem with alot of their...


I had the same problem and got the same answer from Shaw when I called. Fortunately my D-Link 655 modem was less than a year old so I called D-Link support. They said Shaw made a change to their system yesterday which caused the problem.

The solution they provided was to log into the modem then go into setup, manual setup. Make sure the connection is Dynamic IP (DHCP), then at the bottom press the button Clone your PC's MAC address, then save the settings. I then had to unplug the power from my cable modem and router and wait 1 minute. Plugged in the cable modem first, once all the lights have gone through the cycle plug in the router. This fixed my problem so far.

Good Luck...

Jan 28, 2011 | D-Link DIR-628 Wireless Router

1 Answer

It is 2 yrs old and cannot connect to the internet , it was working yesterday and i rearrange tne wires by unpluging them, and when I plug them back in, the internet would not work.I troubleshoot it and...


Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Mar 21, 2010 | Linksys Wireless-G Broadband Router

1 Answer

Works with verizon not with com cast


It was working with Verizon. verizon is a DSL company and Comcast is a CABLE company. settings will be different for both the ISPs. Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Mar 13, 2010 | Belkin (F5D5231-4) Router

1 Answer

Hooked up to roadrunner and everything is working up to the d link itself says no or little connect cable company says I need to have d link set to automatic.


Are you trying to set up router ?
You can set up your router manually, without the
CD.
Make sure that your computer is able to go online
directly through the modem.
If your computer is able to go online through the
modem
Then you need to connect the computer to the
router and the modem to the router.
open the set up page of the router and change the
settings of the router according to the ISP.

Click Here for more information about the routers
and network

Feb 14, 2010 | D-Link DI-604 - 4-Port Broadband Router [...

2 Answers

I have 2 desk top computers hooked up to one internet source and they are hooked up to a box which my old linksys router was hooked to. I now have a lynksys wireless router G. i unplugged the internet...


Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online
through the modem.
If your computer is able to go online through the
modem
Then you need to connect the computer to the
router and the modem to the router.
open the set up page of the router and change the
settings of the router according to the ISP.

Click Here for step by step by instructions

Feb 11, 2010 | Linksys WRT54G2 Wireless Router

1 Answer

What to do after resetting routing? i dont have any manuals!!, its a second hand netgear router . Yesterday i had wireless in my house, today i couldnt get connection, and a friend reset the router, now...


On the router you will find a reset button. Hold it down for 30 seconds and then release it. Unplug the power to the router and plug it back in. Wait for 30 seconds. Now try to reconfigure the router.
To set up the router , you don't need manual or CD. You can do it manually.

First make sure that your computer is able to go online when you connect it directly to the modem. If that is working, then you just need to open the router set up change the settings of the router .

Click Here For Easy step by step instructions

Jan 05, 2010 | Gateway Belkin 54g Wireless DSL/Cable...

2 Answers

I have connected the leased line through router and i will get the net connection in some of the systems and in some of the systems it is not how can i solve this problem


SO All the other computers are able to go online but only 1 computer is not able to go online.
Check the IP address on that computer.
Click Here for more info about routers and network

Oct 27, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

I○Touch Problem.


Hi! I will be more than glad to assist u in this concern.. if u bypass the router it will work, the reason why the modem wont talk to the router bcoz the router is not properly setup.. if you are using a cable modem from ur cable company provider- u need to do a mac clone on the router u have to clone the mac address of ur computer. normaly the mac of ur computer is the one register to your cable company and on the setup page of the router just selct on the internet setup, dhcp after clonning the mac address of your computer. u need to connect ur computer directly to the router and then after doing the process connect the router to the modem. if u are using a username and password, u have to use the pppoe settings on the router, if ur isp set a static ip , set it up to the router, to check the ip setting of your isp.. connect the computer directly to the modem and check if u have internet.. then click on start, run and type cmd,it will give u a dos prompt and from there type ipconfig/all and it will show u the ip address, subnetmask, default gateway, dns server.. I hope this will solve ur concern..

Aug 08, 2009 | NetGear DG834G Router

2 Answers

I currently have a cable modem that the Linksys router has been working with for the last couple of years. Yesterday it started acting up by not letting me go to some sites. Today, it has failed...


Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Jun 21, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

G wireless router


First connect your Laptop via wired LAN before you attemp Wireless, then you will easily be able to pin

May 25, 2008 | Routers

Not finding what you are looking for?
Linksys (WRT54GC) Router Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...