Question about Sewing Machines
I'm guessing here but you might need to calibrate the touch screen or possibly a circuit board has moved inside the machine. I don't know if you can reboot the machine or return it to factory settings which might reset everything. Failing all of that I'd be asking a computer/phone repair place to look at it.
Posted on Apr 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I remembered the fix!!
On the Janome MC 9000
To calibrate the touch screen
1. Turn off
2. on Sewing arm above needle there are a series of buttons
3. Hold down bottom 3 buttons
4. While holding turn on machine
5. Using scribe
6. Touch the centre of each + as it appears
7. It will go Centre bottom rh centre top lh as you select each + position it moves of it's own accord.
8. Turn off machine
9 Turn on and test.
Important sometimes this does not entirely fix prob!!
Simply do it again "Yahoo""
Some mechanics will try to tell U the screen is on it's way out
Bollocks just calibrate.
Posted on Nov 16, 2009
This is the diagnistics routine for Janome 9000.
Run each test in sequence from 1 - 13, or until you find error
The results of this may not be what you want to hear, and may be why no-one has yet replied....I hope for an easy resolution for you
If you are having trouble reading this here, simply send a request via the "contact us" page on:
Posted on Feb 16, 2008
If you tighten up your needle thread, reduce the tension of the needle thread.
For embroidery, and zig-zag, and because the needle makes side movements, it needs more needle thread.
So try to keep you needle thread not very tight,
and tight up your bobbin case tension more, so that the two threads meet under the meterial.
Posted on Jun 10, 2008
Tips for a great answer:
Feb 17, 2015 | Janome Sewing Machines
Oct 19, 2014 | Janome Memory Craft 10000
Jul 27, 2013 | Janome Sewing Machines
Jan 20, 2013 | Janome Memory Craft 9000 Computerized...
Sep 14, 2012 | Janome Sewing Machines
Sep 07, 2009 | Sewing Machines
May 25, 2008 | Janome Memory Craft 10000
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: