Question about Sanyo PLV-Z3 Multimedia Projector

2 Answers

Left Half of screen has blue tint

Have a PLV-Z3 and the left half of the screen has a blue tint especially on lighter colors....I have tried cleaning the dust from the panels by using the bulb serenge but that did not work. I believe that the unit overheated at some point due to lack of cleaning the filter in a timely manner (doh!!).

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Hi there,

do cleaning it with using a compressed air. a possible dirt & dust make this screen a blu tint

Posted on Mar 12, 2009

  • micromaster
    micromaster Mar 12, 2009

    if the solution stated has done, it could be the optical block (polarizer heat damage). The R G B color is faulty and you change the one that damaged

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sanyo Master
  • 19,396 Answers

Try first unplugging the power cord, so to reset the unit.

Posted on Mar 12, 2009

  • Ginko
    Ginko Mar 12, 2009


    To start, try unpluggign the projector power cord for a couple of minutes, this can fix some setting problem.

    If you still have the problem on startup, then try the screen size adjustment procedure at page 40 of the manual below:


    User Manual - PLV-Z3


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Sanyo Z3 Blue Color Problem


the LCD Module of your projector in blue panel is burn so that you can it larger and larger. replace your lcd blue panel. and also the mirror inside your optics.

Oct 08, 2009 | Sanyo PLV-Z3 Multimedia Projector

1 Answer

Two vertical blue bands on right side of screen, get worse as movie progresses, and black areas look really blue. Air cleaned entire projector per manual instructions. Also rotated both blue IN and blue...


with the projector off, remove the cover and unplug the blue lcd panel ribbon cable from the main board and reinsert it. you have to unlock the cable first (either the clip goes up or out, but do not force). if that does not solve the problem, you have a faulty lcd panel.

Sep 08, 2009 | Sanyo PLV-Z3 Multimedia Projector

1 Answer

Projector displaying yellow tint in center of screen.


The yellow tint is probably coming from the lens. It could be that the glass is tempered or possibly just needs to be cleaned.

Jul 24, 2009 | Sanyo PLV 60HT Multimedia Projector

1 Answer

Bottom right corner has a tint projector bulb is good


the colorwheel is collapsing and needs replacing. it's under a metal brace between the colorwheel and the lens. it's a 4-sided mirror tube that is glued together, and the glue wears out after a while.

Jun 18, 2009 | InFocus ScreenPlay 4805 Multimedia...

2 Answers

Sanyo PLV-Z3 Multimedia Projector problem


This could be due to one of the three filters that are easy to change - download the free pdf service manual - not the user manual - it is very descriptive and the filter is about $120 from Sanyo.

Jan 16, 2009 | Sanyo PLV-Z3 Multimedia Projector

1 Answer

Left half image has greenish tint, other half fine XV Z9000U


I am having the same issue, did you ever get yours fixed and if so how please?

Shannon

Nov 25, 2008 | SharpVision XV-Z9000U Multimedia Projector

1 Answer

Blue stain on the image projected by my PLV-Z3


I had the exact same problem with my z3, Turnes out it was the blue filter.
I used the full service manual, and managed to fix mine using the diagrams, and troubleshooting section.

You can get the full service manual here.
http://yama.co.za/forum/index.php?topic=147.0

Apr 05, 2008 | Sanyo PLV-Z3 Multimedia Projector

1 Answer

Sanyo Z3 "Predator effect" problem


Hi there, Ive recently FGixed a PLV-Z3 was as chas said, Filters needed to be re-aligned.

Ive posted the schematics I used on my site.
http://www.entwan.netau.net/1_2_Repair-schematics.html

Jan 16, 2008 | Sanyo PLV-Z3 Multimedia Projector

2 Answers

Toshiba TL-S30 projector, project one half of screen colored blue, one half clear


Is it a problem...or a setting in the projector asking u to check the color settings?

Try the manual fully... Also try the monitor with some analog input (other than PC)

Try to tell me.... whether my suggestion was useful???

Bye

:)

Have a nice day.

Jan 07, 2008 | Sanyo PLV-WF10 Multimedia Projector

Not finding what you are looking for?
Sanyo PLV-Z3 Multimedia Projector Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you a Sanyo Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...