Question about Mitel 5212 IP Phone

2 Answers

Incoming calls go staight to voice mail

My incoming calls do not ring. they go straight to my message and inbox. We are working off of a remote feed from a building 100 yards away. My phone is the only one with this issue though.

Posted by on

  • gar_sta Mar 14, 2009

    Thanks, I will give it a shot!!

  • Anonymous Mar 19, 2009

    I have set up my voicemail greeting but I can't get the voicemail to kick in when I miss a call, can anyone help??

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 37 Answers

There are a number of reasons why this could happen.
1) The most common is you have call forwarding always. When you lift your handset do you hear stutter dial tone? if you do you have a feature active on your phone. To correct this you will need to turn the call forwarding feature off You will have to get the code from your system administrator or go through your superkey (the Blue Key) using the # until you find the call forwarding options and review and turn it off (Change).

2) It's possible you have Do not Disturb active.
3) its also possible you have Make busy active

2 and 3 can be removed by the clear all feature code but 1 must be cleared using the method I described. Get these codes from the system admin.


Posted on Mar 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Contributor
  • 57 Answers

Maximum length that ethernet cat5 cable is tested for is 100 feet. Check that out also.

Posted on Jan 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the current extension on my polycom 301 phone from 334 to 300?


Go to support on the new phones manufacturers web site and you can download an owners manual, which will tell you how to re-program the phones extension. murf427

Aug 01, 2012 | Polycom IP 301 SIP IP Phone

1 Answer

Voice mail not working


Contact your Service Customer Supporter by dialling your respective Service Company Customer Care(Airtel/Aircel/etc..) or Contact your nearby dealer. Actually its a problem which is related to your sim.

Jul 24, 2012 | Panasonic KX-T7440

1 Answer

I need instructions on how to set up voice mail , and how to retrive missed calls


Voice mail: press [Messages] button, enter code when prompted, follow voice prompts
Missed calls: press [Directories] button, press [Missed Calls] softkey, scroll through numbers

Jan 28, 2011 | Cisco 7941G IP Phone

2 Answers

Calls going straight to voice mail after only one 1/2 ring


The another solution is SendAllCalls is highlighted.

Press phone/exit button
check SendAllCalls if highligted press button onto not

Jan 12, 2011 | Avaya 4610SW IP Phone

2 Answers

Voicemail light flashing but no message


This can usually be fixed by calling the phone number that the voice mail indicator light is flashing on from a different phone number. Leave a voice mail message and then go into the voice mail and delete the message that you just left. The indicator light should then go out.

Sep 14, 2010 | Mitel 5212 IP Phone

3 Answers

My Avaya phone on our Avaya system only rings


ask your local admin to remove your phone from coverage path

Apr 15, 2010 | Linksys SPA941 IP Phone

1 Answer

Can't activate voice mail on Mitel 5212 IP phone


You need to verify your Call rerouting, you will also need to clear any call forwarding that might be active. Its possible the system is not able to transfer a call to the forwarded location.

Sep 29, 2009 | Mitel 5212 IP Phone

1 Answer

Message waiting does not show on the LED (but did previously)


Did the messge waiting light work before?
Does the light flash when there is an incoming call?

try this... FEATURE # 8 0 6
this is a code to shut off the Static Time and Date feature on the set. Usually if this feature is turned on, the set does not flash where there is a message.

Well that is one thing, or the port maybe bad, and a technician maybe required to move that phone to a new port on the phone system.

Aug 25, 2009 | Nortel Business Series Terminal T7208 -...

2 Answers

I AM TRYING TO SET UP MY VOICE MAIL, BUT EACH TIME I PRESS THE MESSAGES BUTTON, ALL I GET IS A RECORDING WHICH TELLS ME TO CONTACT THE OPERATOR. SO THEN IT TELLS ME THAT THE OPERATOR IS NOT AVAILABLE.


That is because you need to setup the voice mail in Cisco Unity and also setup the phone in the call manager. Unless you have voice-mail setup it states.....Cisco Unity Messaging system....is the beginning of the message.

Aug 07, 2009 | Cisco 7940 IP Phone

1 Answer

Trying to program a touch for incoming calls that will go through my voice mail directly


This can be handled by the DND feature in your admin settings... Do not disturb will transfer your calls direct to voicemail without ringing the handset.

May 18, 2009 | Mitel 5212 IP Phone

Not finding what you are looking for?
Mitel 5212 IP Phone Logo

1,269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitel IP Phones Experts

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Kelley Hopper

Level 2 Expert

57 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Mitel IP Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...