Question about Dell Dimension 9200 PC Desktop

Open Question

Hard drive diagnostics return code 4

After a problem with my computer, a Dell Dimensio 9200, I got a error on one of my 2 harddisks. I did run Harddrive Diagnostics and this was the result: Drive 0 WDC WD2500JS-75NCB3 Fail. Return code: 4 Drive 1 WDC WD2500JS-75NCB3 Pass My computer is very slow since that problem. I can reach my data and already made a backup from all my data. Does anybody know what the problem is? And how I can solve this? pmglukassen @ hotmail.com

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

frcs68
  • 1605 Answers

SOURCE: Dell Precision 470 Dual Processor

enable "auto" in BIOS for drive #0 and drive #1. you can select IDE or SATA drive. restart the machine.

Posted on Dec 10, 2008

appman67
  • 33 Answers

SOURCE: c0000218 error code.cannot boot dell 8400 to troubleshoot problem

It sounds like you've had a fatal error - you can reboot the PC back to factory setting - this is called a hard reset - but before you do that - unplug you tower and clean it out (dust & dirt) - once you're done with that - restart you computer and press &hold down the "Ctrl" and "F11" button at the same time - this will let you reset the PC to the original factory configuration.

Posted on May 03, 2009

  • 1015 Answers

SOURCE: When turning on, all I get is a balck screen w/ a

Your hard drive may be dead, the partition/boot sector is damaged or the motherboard seiral ata chip is bad. If it is one of the first two you will need to delete the partition, re-create the partition and format the drive. Take the drive out and install it in another computer as a slave and see if the drive is recognized and files are all there. If it works in the other computer try backing up the drive and then re-install it in the problem computer and try to format and re-install the system either using the installation discs that came with the computer. If the system utility to restore the computer is located on the drive you might have an issue. You can try using that utility if you have it and it may or may not work.

Posted on Sep 25, 2009

  • 3940 Answers

SOURCE: Blue screen error with stop code 0 X 000000ed.

Unmountable Boot Volumes almost always indicate a failure of the hard drive. You can try running CHKDSK /R from recovery console or a clean installation of Windows. If those fail, replace the hard drive.

Posted on Oct 02, 2009

  • 1738 Answers

SOURCE: fail on hard drive diagnostices return code 7

Bad hard drive, sorry.

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell error code ofoo 0131d


Hi,

It is unfortunate that the computer displays an error code as "ofoo 0131d". Request you to use the below link and install My Dell:
http://dell.to/1cn35y5
Then run a diagnostics using My Dell and let me know the test results.

Thanks and Regards.
Kiran Kumar.
#iworkfordell.

Oct 04, 2014 | Dell Inspiron 8600 Notebook

2 Answers

Error message 2000-0151 on dell inspirion 1545


Hi.

Remove and reinstall the Hard Drive for the error codes:
  • 1000-0141
  • 2000-0141
  • 1000-0142
  • 2000-0142
  • 1000-0143
  • 2000-0143
  • 1000-0144
  • 2000-0144
  • 1000-0145
  • 2000-0145
  • 1000-0146
  • 2000-0146
  • 2000-0151
Please see the Service manual for instructions on how to remove and replace the Hard Drive. Be sure to remove and reinstall the cables for the hard drive if you are on a Desktop Computer.
After reinstalling the hard drive re-run the diagnostics if you receive the same error code Contact Us.
Run the Drive Self Test (DST) from the Utility Partition also known as the 32 bit diagnostics to determine if the previous error has been corrected. If the DST from the Utility Partition does not indicate a failure of the drive, we consider the error to have been corrected and the drive does not need to be replaced.
  • 1000-0146
  • 2000-0146
For instructions on how to run the Dell 32 bit diagnostics click here.


Regards.

Sep 05, 2011 | Computers & Internet

2 Answers

Computer boots up but then goes into a black screen I have run a Dignostic on it and I get an DST Short Test Error Code 100-0146. This is a Dell Latitude D600. Thanks In Advance


This error indicates that your hard disk drive or the circuitry that controls the hard drive is defective.
Either your hard drive is defective or the motherboard.
Try running diagnostics form a CD on your computer. You should have a CD that came with thecomputer that has "Diagnostics and Utilities" listed under contents.Boot form this CD and run the extended diagnostics.
If you don't have the CD you can go to www.support.dell.com andselect "Drivers and Downloads". Enter the "service tag" (serialnumber) of the computer. You can then download "Diagnostics" .
To boot from a CD disk, power on your computer and tap the key tobring you to the "One time boot menu". Insert the CD into the top CD/DVD driveand then select "Boot from CD/DVD" and hit key. Select the"Run the 32 Bit Dell Diagnostics.

If you are able to run the Diagnostics then your hard drive is probably defective.

Aug 02, 2011 | Dell Latitude D600 Notebook

2 Answers

I have Dell inspiron 1525 window vista recovery reports 5 error are detected in hard drive and memory errors detected on my laptop 1. hard drive doesnt respond to system commands-critical error 2.boot...


your HDD may be corrupted, re-installing windows vista is one option. Your best bet is if you have/ can obtain a copy of windows vista run setup and try the repair wizard in the windows vista setup, the wizard automatically finds errors and missing files and replaces them therefore solving any errors in your HDD. you can also try to use the recovery wizard from your recovery disc. best of luck

May 17, 2011 | Dell Inspiron 1525 Notebook

2 Answers

Computer will not boot up, "internal hard disk not found"


Hi, first thing to do is not panic!. Have you tried switching the machine off for five minutes and then turning it back on? If you still have a problem, power the machine off, open up the underneath panel which holds the hard drive (see your manual for which panel or look for one appx 8cm by 4cm. there will probably be one screw which you have to remove. to remove the hard drive once the screw is removed, pull the plastic band along the axis of the hard drive until it unplugs from the connector. Then reverse the proceedure! This will reconnect the hard drive and clean the connector terminals symultaneously. When the laptop is back together, try powering up again. If this doesn't work, contact me again. Kind regards

Aug 28, 2010 | Dell Inspiron 1545 Notebook

4 Answers

My Dell inspiron 1501 went to a blue screen and gives me an error message when reading the Hard Drive upon boot up. I am told the disk is either malfuntioning on logic or may have crashed. How can I find...


fortunately dell has built in diagnostics that can assist you with identifying the problem. here is a link on how to run them. if the drive is bad then you would need to replace it and reinstall windows and drivers. if it is good then run memory diagnostics as well just to be safe. if both pass then you may have to do a destructive reinstall of windows because you most likely have a virus issue. copy and paste this link into your browser it will help you run the diagnostics.

http://www.cs.utexas.edu/~deke/laptopsupport/manuals/d600/diag.htm

hope this helps

Dec 10, 2009 | Dell Inspiron 1501 Notebook

1 Answer

Cannot read disk


"A disk read error occured press Ctrl+Alt+del to restart " FOLLOW THE BELOW INSTRUCTIONS TO RUN DELL DIAGNOSTIC ON INTERNAL HDD Open the Dell Diagnostics on either your hard drive (F12) or from the Resource (Drivers and Utilities) CD. Running from the hard drive is the preferred method of using the diagnostics. If problems occur when running from the hard drive or there is no Utility Partition, the diagnostics can be run from Resource (Drivers and Utility) CD. From your hard drive: Shut down and restart the computer. When the DELL® logo appears, press immediately. If you wait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop. Then shut down your computer and try again. When the boot device list appears, highlight ?Boot to Utility Partition? on desktop systems or ?Diagnostics? on portable systems and press . Note: On portable systems, PSA will be executed first. When PSA completes, press any key to load the Dell Diagnostics.? Go to step 2. NOTE: If you receive a message stating that no Diagnostics utility partition has been found, follow the instructions on the screen to run the Dell Diagnostics from your Resource (Drivers and Utilities) CD. From the Drivers and Utilities CD ResourceCD: Insert the Drivers and Utilities CD into the CD drive. Shut down and restart the computer. When the DELL® logo appears, press immediately. If you wait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop. Then shut down your computer and try again. NOTE: This feature changes the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program. When the boot device list appears, highlight IDE CD-ROM and press . Select Boot from CD-ROM option from the CD boot menu. Select Run the 32 Bit Dell Diagnostics numbered list. If multiple versions are listed, select the version appropriate for your platform. Go to Step 2. After the Dell Diagnostics loads, the Main Menu appears. Click the button of the option you want. If a problem is encountered during a test, a message will display the error code and a description of the problem. Write down the error code and problem description and follow the instructions on the screen. If you can not resolve the error condition, contact Dell. If you run a test from the Custom Test or Symptom Tree option, click the tabs above the right window for more information: When the tests are completed, if you are running the Dell Diagnostics from the Drivers and Utilities CD, remove the Drivers and Utilities CD. Close the screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the Main Menu screen. Regards Sunil Dsouza

Dec 04, 2009 | Dell Dimension 2400 PC Desktop

2 Answers

Computer will reboot on Virus/Spyware scan at random. I have: 1. Installed clean XP SP2 parallel system and booted that one. Same problem. 2. Memory Test at boot time is OK. 3. Air circulation from Power...


The weak airflow from the power supply unit (PSU) is suspect. Virus / Malware scanning is a disk and processor intensive operation - resulting in greater load on both. Increased load translates to heat. Check to be sure that the processor (CPU) fan is running, too. An overheating PSU and CPU can cause all types of problems.

Are you using a genuine XP install disk/image or a disk of questionable origin? Use of bogus OS disks is "asking for trouble".

If your system BIOS or set up (accessed during boot) allows, try to located the page that displays component temperatures and fan speeds. Check this immediately after rebooting from a an unplanned shut down - if unable to locate this set up page, download HWMonitor at:

http://www.cpuid.com/hwmonitor.php

It is a free program - choose the 32 or 64 bit version. Note fan RPM and CPU core temps to help determine where heat is coming from - or which fans aren't operating correctly.

Sep 18, 2009 | Dell Dimension 5150 (DIM515MIN) PC Desktop

1 Answer

My OS freeze's as soon as i input my password


Hi there.
Sorry but i have to inform you that your hard drive is failing, the error messages that you are getting relate to this fact and is related to the hard drive having unrecoverable bad sectors or immanent hard drive failure.
There is no way you can recover the drive!!
Your only option now would be to buy a new drive for the computer or if the machine is still under warranty take advantage of that and send it in for repair, you will no doubt have to purchase a windows installation disk too.

Good luck and thanks for using FixYa!!

May 24, 2009 | Dell Dimension 9200 PC Desktop

2 Answers

Error in system check 0f00:136c (resource cd, installation cd)


Use MS Systemrestore to restore it to an earlier time or do a complete PC backup. See Dell website below:
http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?journalid=5E3CADE8347C1C3CE040AE0AB5E1

Dec 19, 2008 | Dell Dimension 8400 PC Desktop

Not finding what you are looking for?
Dell Dimension 9200 PC Desktop Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...