Question about Whirlpool Washing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: whirlpool AWG 345/4 error code
after you have done a manual drain of the water what is left in ie pipe and bucket, Disconnect pipe at waste and remove round cover plug from lower left corner of machine blow down pipe this gets all muck /blockages out ensure you put somthing at machine end to catch any thing that comes out. Also ensure pipe is free of any objects which may have moved down pipe ie buttons coins. I had 4 buttons jammed in. sorry about the names i have given to parts on machine as i am a vehicle tech. hope it helps
Posted on Dec 02, 2008
you dont say if this machine is new if it is contact the whirlpool web page and they will tell you how to do the programs but i must say 1200spin is not very fast for drying you need at least 1600 soin to do a good job.adrian,,,,,
Posted on Jun 29, 2010
SOURCE: I have an AWG 345/4
To prevent the washer from operating while the detergent drawer is open your machine has what is called a "reed switch". The reed switch is controlled by this magnet, so that when the drawer is closed the magnet causes the reed switch to close and this tells the control board to go ahead and run the machine.
Your error message is telling you the reed switch it not working, so they want you to check the magnet to make sure it is still in place and is working.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
Posted on Sep 07, 2010
Testimonial: "Hi sound thought reed switches were only used on fridge doors Thanks "
SOURCE: my washing machine is displaying
Hi from retired Englishman in SW France,
My notes for Whirpool models suggest that F14 is 'EEPROM failure (control unit)'.
Sorry- looks like a service call ;-0(
If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
Posted on Jul 08, 2011
Tips for a great answer:
Apr 09, 2016 | Simpson Washing Machines
May 31, 2014 | Electrolux EW1000i Front Load Washer
Sep 20, 2012 | Ricoh Office Equipment & Supplies
May 14, 2012 | Whirlpool Microwave Ovens
Jul 08, 2011 | Whirlpool Washing Machines
Sep 07, 2010 | Whirlpool Washing Machines
Jun 29, 2010 | Washing Machines
Oct 01, 2009 | Washing Machines
Jul 30, 2008 | Washing Machines
54 people viewed this question
Usually answered in minutes!