Question about Televison & Video

Open Question

I have lost the remote control for my Phillips tv slc431eab, my question is I need to get past the Phillips start up screen and need to press OK can I do this on the tv itself.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Rrmote control codes

i need the code for philips universal remote i lose the code

Posted on Oct 12, 2008

  • 374 Answers

SOURCE: need codes for a phillips magnavox for dish network controller

Follow this link and got to the remote section. Once there shoose the type of remote you have and select remote codes to get the ones for that particular remote that may operate the piece of equipment desired. I hope this is of assistance to yoiu and thanks for using Fix Ya. Please let me know if I can be of further assistance.
Jim

Posted on Nov 11, 2008

Happy2Help
  • 59 Answers

SOURCE: I need codes for a phillips tv and a phillips universal remote?

Hi michaeljlent,

There are a number of codes for your remote that correspond to Phillips TV models. They are:

002 009 109 202 209 210 310 402 408 508 510 807 901 914 917

For your reference, here's a web address where all the codes for your remote are listed (along with programming instructions):

http://www.universal-remote.net/philipsmagnavox.html

I hope this helps - please let me know if I can be of any further assistance.

Posted on Dec 12, 2008

  • 1 Answer

SOURCE: Teknique Jumbo Universal Remote Control Instructions

Pacific TV - Press "SET" and Hold it, press "TV" and release it, then release "SET", then type one of these codes 0676, 0677, 0678 or 0679. After each code try powering off the TV using the remote. One should work. (I think the 2nd one worked for me).

Posted on Dec 26, 2008

  • 1 Answer

SOURCE: i need a code for my remote control

I NEED THE CODE OF MY REMOTE CONTROL PHILIPS RC-2835/01...PLEASE HELP US! WE NEED THE TV!

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost all programs need to retune How


  1. Scan the channels
    1. Press the Menu button on your remote control.
    2. Select Channel and press OK on your remote control. For Aerial you must choose the Cable option.
    3. Go to Auto tuning and press OK twice on your remote control.
      - Set the Automatic tuning screen to Cable (vertical) and Digital (horizontal). - Then press OK on your remote control.
    4. Enter the following values:- Search mode: Quick- Network: Manual- Network ID: the code for your region (22 for Flanders and 12 for Brussels)
    5. Press OK on your remote control.
    6. For Frequency enter the value 322000 and press OK on your remote control.
    7. For Modulation enter the value 256QAM and for Symbol rate enter the value 6875.
      Then select Search (or Next, this differs by type of TV) and press OK on your remote control.
    8. Your TV now scans the channels.

Jun 02, 2015 | Samsung Televison & Video

2 Answers

Hi Lost instructions. Would like to obtain how to program my Philips Magnavox remote. Don't know if the #2 MP#20C103-1 or the 1-0010 are the model #s. Thanks


Turn TV on, press and hold CODE SEARCH button until light comes on, press TV, the light will blink and remain on, enter the code, the light will go off, press POWER untill TV goes off....hope this was helpful...

Apr 23, 2010 | Philips Magnavox Learning Universal Remote

1 Answer

538744) Remote Control Jumbo, I need the code for a Phillips TV/can you help me?


You'll have to try a few: 004, 005, 029, 030, 072, 073, 078, 080, 087, 118, 153. Or use "automatic coding": turn off appliance, hold down function key on remote (ex., TV) until red light comes on, press & release OFF/ON, press Channel + continually and slowly until appliance turns on, press OK to lock in this setting. Repeat if this doesn't work.

Jun 12, 2009 | Brookstone 538744 Remote Control

1 Answer

Phillips PM 335 Code List---


i have a flat screen sylvania tv wit no remote need codes

Jan 14, 2009 | Philips PM335 Remote Control

2 Answers

Teknique Jumbo Universal Remote Control Instructions


Pacific TV - Press "SET" and Hold it, press "TV" and release it, then release "SET", then type one of these codes 0676, 0677, 0678 or 0679. After each code try powering off the TV using the remote. One should work. (I think the 2nd one worked for me).

Jul 18, 2008 | Jensen JER-422 Universal Remote Control

2 Answers

Phillips pm3s lost code book:


http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

May 31, 2008 | Philips PM3S Remote Control

1 Answer

Phillip was 32 inch flat screen


maybe you can buy another remote control which is the universal remote control.

May 04, 2008 | Gateway FPD2275W LCD Monitor

2 Answers

Lost codes


press the set boton press chanel up and wait to hold the chanel

Sep 17, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73591 Answers

Cindy Wells

Level 3 Expert

5052 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...